Search

Abstract: A fundamental difference between ITER and present devices is the need to shield against 14MeV neutrons. This has major consequences for plasma start-up/rampdown (su/rd) and also for protecting the first wall from plasma contact. This has led to design decisions: (a) not to place in front of the n-absorbing blanket a separate wall-limiter structure, (b) to modularize the blanket into ∼400 remote handling compatible blanket modules (BM), and (c) to shape the front face of the BMs for plasma contact. Combined protection-su/rd options are considered here for the inner and outer wall with regard to optimal shaping. Unfortunately, the modularity of the BM system (inter-BM gaps and misalignments) requires shaping of the BM faces that increases peak power loads by ∼10× relative to the ideal (continuous, circular) wall-limiter. Fortunately, the level may still be acceptable, ∼2MW/m2, even for su/rd power of 7 MW. [Copyright &y& Elsevier]

Abstract: A precise geometric method is used to calculate the power deposition on the future JET ITER-Like Wall beryllium tiles with particular emphasis on the internal edge loads. If over-heated surfaces are identified, these can be modified before the machining or failing that actively monitored during operations. This paper presents the methodology applied to the assessment of the main chamber beryllium limiters. The detailed analysis of one limiter is described. The conclusion of this study is that operation will not be limited by edges exposed to plasma convective loads. [Copyright &y& Elsevier]

A tangential infrared thermography system is installed in the WEST tokamak to observe the thermal scene of the first wall and the divertor components through a wide-angle tangential view. The goal is to provide and monitor the heat load deposition on the plasma facing components. About one-sixth of the chamber is observed, including sectors of the baffle, the lower and upper divertors, one inner bumper, vertical displacement event (VDE) protections, one ICRH antenna, and other parts of the wall. It is used for real time machine protection by monitoring temperature thresholds in delimited region of interest, and for analysis of normal or specific heat load events during operation such as VDE, ELM, disruption or runaways. This wide-angle view uses one aspherical and one on-axis plane mirrors, a sapphire window and three lenses for the objective of the camera. The optical line is optimized for two wavelengths 1.7 and 4 µm. The field of view is 60° on a 512×640 pixels Focal Plane Array. The endoscope is fully actively cooled. The thermal scene is complex to interpret given the fully metallic and radiative environment and the uncertainties on the emissivity which is angular-dependent and changes with the surface properties. This involves significant inaccuracy on the recovery of the real temperature. In this context, an interpretation by modeling approach is better suited, based on ray-tracing simulations taking into account the optical properties of materials. For instance, this allowed discriminating reflections patterns from real thermal events in the wide-angle view. A description of the wide-angle infrared diagnostic and its performances is presented as well as experimental measurements obtained in the WEST Tokamak. [ABSTRACT FROM AUTHOR]

Abstract: On the limiter of Tore Supra, the heat loads map computed from deconvolution of IR surface temperatures shows good agreement with calorimetry measurements. This experimental heat pattern allows deducing the heat fluxes in the scrape-off layer using a 3D magnetic calculation and assuming only parallel heat transport along field lines. This calculation leads to an underestimation of the power circulating in the edge plasma according to the power balance, similarly to RFA measurements. The comparison between experimental heat loads on the limiter and modelling also shows a spreading of heat fluxes near the LCFS that cannot be explained only by parallel transport in the SOL. [Copyright &y& Elsevier]

Abstract: The precursors and following sequential events leading to radiative disruptions in Tore Supra have been analysed using infrared imaging, together with visible and ultraviolet spectroscopy of impurity species. A common feature observed prior to the disruptions is the appearance of a small (∼cm2) hot spot on the main plasma facing component, the Toroidal Pumped Limiter (TPL), clearly localised in a zone of thick carbon re-deposition (>100μm). A MARFE (Multifaceted Asymmetric Radiation From the Edge) is often triggered, followed by disruption. Such hot spots have been observed in ∼24% of the analysed disruptions, which is consistent with the fact that only 4/18 (22%) of the total area of the TPL is monitored with infrared cameras. These results suggest that over-heating of thick carbon re-deposition layers may play a role in the operational limits (MARFE, disruption) encountered. [Copyright &y& Elsevier]

Abstract: A spatially resolved calculation of the charge exchange particle and energy fluxes on the Toroidal Pumped Limiter (TPL) of Tore Supra is presented, as a first step towards a better understanding and modelling of carbon erosion, migration, as well as deuterium codeposition and bulk diffusion of deuterium in Tore Supra. The results are obtained with the EIRENE code run in a 3D geometry. Physical and chemical erosion maps on the TPL are calculated, and the contribution of neutrals to erosion, especially in the self-shadowed area, is calculated. [Copyright &y& Elsevier]

Abstract: The ITER Ion Cyclotron Resonant Heating (ICRH) antenna provides plasma heating at a power of 20MW. Operation in the ITER environment imposes significant thermal power handling capability, structural integrity, shielding and operations requirements. The design will require a step change over any predecessor in terms of power, scale and complexity. This paper reports the main mechanical design features that address the challenges and often conflicting requirements during the conceptual design phase. [Copyright &y& Elsevier]

Abstract: The uniform layer with thickness at least 50–100μm was found on the CFC tiles from the inboard midplane after more than four years of tokamak operation. The upper part of the uniform layer was amorphous, but at the depth of ∼5μm a structure consisting of micro-size regions with aromatic chains located parallel to the surface was found. Gradual transition from uniform layer to underlying CFC structure was observed. The reciprocating material probe was used for installation of CFC samples in the Tore Supra deuterium plasma. The thermal desorptional spectra of these samples are compared with the spectra of the samples irradiated in the laboratory stand and with the spectra of hydrogenated carbon film. The peculiarities of hydrogen isotope trapping under plasma irradiation and at the atmosphere are presented and discussed. [Copyright &y& Elsevier]

Abstract: The implementation of actively cooled high heat flux plasma facing components (PFCs) is one of the major ingredients required for operating the Tore Supra tokamak with very long pulses. A pioneering activity has been developed in this field from the very beginning of the device operation that is today culminating with the routine operation of an actively cooled toroidal pumped limiter (TPL) capable to sustain up to 10MW/m2 of nominal convected heat flux. Technical information is drawn from the whole development up to the industrialisation and focuses on a number of critical issues, such as bonding technology analysis, manufacture processes, repair processes, destructive and non-destructive testing. The actual experience in Tore Supra allows to address the question of D retention on carbon walls. Redeposition on surfaces without plasma flux is suspected to cause the final ‘burial’ of about half of the injected gas during long discharges. [Copyright &y& Elsevier]

Abstract: The new CIEL (Composantes Internes Et Limiteur) configuration of the Tore Supra tokamak has as its main plasma-facing component (PFC) a Toroidal Pumped Limiter (TPL) [P. Garin et al., in: Proceedings of the 20th Symposium on Fusion Technology, Marseille, vol. 2, 1998, p. 1709], which must sustain the bulk of the energy leaving the plasma. Analysis of the heat deposition pattern on the TPL indicates that perpendicular heat transport may play at least as significant a role as parallel heat transport [F. Saint-Laurent et al., Nucl. Fusion 40 (2000) 1047, R. Mitteau et al., these Proceedings]. We present a new approach for modelling the heat deposited onto the TPL, which follows test ‘heat packet’ trajectories backwards from the TPL towards the hot plasma column. Results are compared with experimental data and trends due to plasma parameters dependencies are described. Because of ripple effects, the limiter is covered by wetted areas with long connection lengths (tens of meters), and shadowed areas with very short connection lengths (centimeters). Sharp transitions between the two are clearly seen in experiment and also reproduced in the model. [Copyright &y& Elsevier]

The ITER equatorial port visible/infrared wide angle viewing system concept is developed from the measurement requirements. The proposed solution situates 4 viewing systems in the equatorial ports 3, 9, 12, and 17 with 4 views each (looking at the upper target, the inner divertor, and tangentially left and right). This gives sufficient coverage. The spatial resolution of the divertor system is 2 times higher than the other views. For compensation of vacuum-vessel movements, an optical hinge concept is proposed. Compactness and low neutron streaming is achieved by orienting port plug doglegs horizontally. Calibration methods, risks, and R&D topics are outlined. [ABSTRACT FROM AUTHOR]

Abstract: In ITER, as in any tokamak, the first wall and divertor plasma-facing components (PFC) must provide adequate protection of in-vessel structures, sufficient heat exhaust capability and be compatible with the requirements of plasma purity. These functions take on new significance in ITER, which will combine long pulse, high power operation with severe restrictions on permitted core impurity concentrations and which, in addition, will produce transient energy loads on a scale unattainable in today’s devices. The current ITER PFC design has now reached a rather mature stage following the 2007 ITER Design Review. This paper presents the key elements of the design, reviews the physics drivers, essentially thermal load specifications, which have defined the concept and discusses a selection of material and design issues. [Copyright &y& Elsevier]