Search

Objective: The elasticity of the aortic wall varies depending on age, vessel location, and the presence of aortic diseases. Noninvasive measurement will be a powerful tool to understand the mechanical state of the aorta in a living human body. This study aimed to determine the elastic modulus of the aorta using computed tomography images., Methods: We constructed our original formulae based on mechanics of materials. Then, we performed computed tomography scans of a silicon rubber tube by applying four pressure conditions to the lumen. The segment elastic modulus was calculated from the scanned images using our formulae. The actual modulus was measured using a tensile loading test for comparison., Results: The segment moduli of elasticity from the images were 0.525 [0.524, 0.527], 0.524 [0.520, 0.524], 0.520 [0.515, 0.523], and 0.522 [0.516, 0.532] (unit: MPa, median [25%, 75% quantiles]) for the four pressure conditions, respectively. The corresponding measurements in the tensile test were 0.548 [0.539, 0.566], 0.535 [0.528, 0.553], 0.526 [0.513, 0.543], and 0.523 [0.508, 0.530], respectively. These results indicated errors of 4.2%, 2.1%, 1.1%, and 0.2%, respectively., Conclusion: Our formulae provided good estimations of the segment elastic moduli of a silicon rubber tube under physiological pressure conditions using the computed tomography images., Significance: In addition to the elasticity, the formulae provide the strain energy as well. These properties can be better predictors of aortic diseases. The formulae consist of clinical parameters commonly used in medical settings (pressure, diameter, and wall thickness).

Objectives: This study evaluated the characteristics of left ventricular maximum principal strain (LV-MPS) using cardiac CT in subjects with normal LV function., Methods: Of 973 subjects who underwent retrospective electrocardiogram-gated cardiac CT using a third-generation dual-source CT without beta-blocker administration, 31 subjects with preserved LV ejection fraction ≥ 55% assessed by echocardiography without coronary artery stenosis and cardiac pathology were retrospectively identified. CT images were reconstructed every 5% (0-95%) of the RR interval. LV-MPS and the time to peak (TTP) were analyzed using the 16-segment model and compared among three levels (base, mid, and apex) and among four regions (anterior, septum, inferior, and lateral) using the Steel-Dwass test. The intra- and inter-observer reproducibilities for LV-MPS were calculated using intraclass correlation coefficients (ICCs)., Results: The intra- and inter-observer ICCs (95% confidence interval) for peak LV-MPS were 0.96 (0.94-0.97) and 0.94 (0.92-0.96), respectively. The global peak LV-MPS (median, inter-quantile range) was 0.59 (0.55-0.72). The regional LV-MPS significantly increased in the order of the basal (0.54, 0.49-0.59), mid-LV (0.57, 0.53-0.65), and apex (0.68, 0.60-0.84) (p < 0.05, in each), and was significantly higher in the lateral wall (0.66, 0.60-0.77), while that in the septal region (0.47, 0.44-0.54) was the lowest among the four LV regions (all p < 0.05). No significant difference in TTP was seen among the myocardial levels and regions., Conclusion: CT-derived LV-MPS is reproducible and quantitatively represents synchronized myocardial contraction with heterogeneous values in subjects with normal LV function., Key Points: • CT-derived left ventricular maximum principal strain analysis allows highly reproducible quantitative assessments of left ventricular myocardial contraction. • In subjects with normal cardiac function, the peak value of CT-derived left ventricular maximum principal strain is the highest in the apical level and in the lateral wall and the lowest in the septum. • The regional peak left ventricular maximum principal strain shows intra-ventricular heterogeneity on a per-patient basis, but myocardial contraction is globally synchronized in subjects with normal cardiac function seen on cardiac CT.

Background: Our aim was to evaluate the ability of adenosine triphosphate (ATP)-stress myocardial computed tomography perfusion (CTP) imaging to detect myocardial ischemia in the left anterior descending artery (LAD) territory, and to compare this method with coronary flow velocity reserve (CFVR) measured by transthoracic Doppler echocardiography (TTDE)., Methods: ATP-stress CTP and CFVR were performed in 50 patients with stable angina pectoris. Myocardial ischemia assessed from CTP imaging was defined as qualitative visual perfusion defects and reduced myocardial blood flow (MBF) based on quantitative assessment. A cut-off value of CFVR of 2.0 was used., Results: The mean CFVR was 1.9 ± 0.6 in ischemic regions by CTP, whereas it was 2.9 ± 0.8 in non-ischemic regions (p < 0.001). CTP imaging could accurately predict CFVR <2.0 with 84.0% diagnostic accuracy (94.7% sensitivity, 77.4% specificity, 72.0% positive predictive value, and 96.0% negative predictive value). When receiver operating characteristic curve analysis of the MBF data was performed to detect CFVR <2.0, the area under the curve was 0.89, and the optimal MBF cut-off value was 1.43 mL/g/min., Conclusions: This study suggests that qualitative and quantitative assessment of ATP-stress CTP exhibits a good correlation with CFVR for evaluation of myocardial ischemia., (Copyright © 2020 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.)

Background: The relationship between shot-to-shot sampling rates for dynamic myocardial computed tomography perfusion (CTP) and robustness of CTP-derived myocardial blood flow (CT-MBF) is debatable. We retrospectively investigated the influence of a reduced sampling rate for dynamic CTP on CT-MBF computation and diagnostic performance for detecting myocardial perfusion abnormalities., Methods: Pharmacological stress dynamic whole-heart CTP was performed in 120 patients suspected with coronary artery disease. Dynamic CTP data were obtained for 30 continuous heartbeats during the R-peak to R-peak (1RR) interval on electrocardiography. Three additional datasets were created with sub-sampling acquisitions every 2, 3, and 4 heartbeats from the original dataset as interval times of 2RR, 3RR, and 4RR, respectively. CT-MBF was calculated using deconvolution analysis and determined as the mean value of the whole heart (global CT-MBF) and using the 16-segment model (segmental CT-MBF). The diagnostic performance of segmental CT-MBF for detecting perfusion abnormalities was compared to that of cardiac magnetic resonance imaging as the gold standard in 32 of 120 patients. These results were compared among the four CTP datasets., Results: Global CT-MBFs for 1RR, 2RR, 3RR, and 4RR sampling were 1.57 ± 0.34, 1.54 ± 0.36, 1.51 ± 0.37, and 1.41 ± 0.33 mL/g/min, respectively. Areas under the receiver operating characteristic curves of segmental CT-MBF for 1RR, 2RR, 3RR, and 4RR sampling were 0.84, 0.83, 0.79, and 0.76, respectively (1RR versus [vs.] 2RR, non-significant; 1RR vs. 3RR or 4RR, p < 0.05)., Conclusion: CT-MBF with 2RR sampling has similar performance with regard to quantification and detecting myocardial perfusion abnormalities as that with 1RR sampling., (Copyright © 2019 Elsevier Inc. All rights reserved.)

To assess a two-phase contrast injection protocol for contrast enhancement during cardiac computed tomography (CT) in children with congenital heart disease. Forty-three children (20 boys, 23 girls) of median age 13 months (range 3 days-8.3 years) and weighing ≤ 20 kg who underwent cardiac CT using a two-phase contrast injection protocol at our institution were retrospectively identified. High-pitch spiral third-generation dual-source cardiac CT (tube voltage 70 kV) was performed with a fixed delay of 60 s after contrast injection in the order of 10 mgI/kg/s (30 s), 15 mgI/kg/s (20 s), and a saline chaser (10 s). Attenuation in the inferior vena cava (IVC), superior vena cava (SVC), right atrium (RA), right ventricle (RV), pulmonary artery (PA), left atrium (LA), left ventricle (LV), and descending aorta (AO) was compared using the Steel-Dwass and Fisher's exact tests. The median (interquartile range) attenuation in the IVC, SVC, RA, RV, PA, LA, LV, and AO was 285 (264-347) Hounsfield units (HU), 416 (370-445) HU, 368 (320-388) HU, 373 (322-417) HU, 397 (330-432) HU, 425 (373-469) HU, 435 (385-468) HU, and 437 (392-491) HU, respectively (p < 0.05, IVC vs. the other anatomic sites). There was no significant difference in diagnostic success rate for attenuation > 250 HU between the IVC (41 children, 95.3%) and the other sites (43 children, 100%). A two-phase contrast injection protocol is useful for effective contrast enhancement in pediatric cardiac CT.

Objectives: To evaluate the feasibility of three-dimensional (3D) maximum principal strain (MP-strain) derived from cardiac computed tomography (CT) for detecting myocardial infarction (MI)., Methods: Forty-three patients who underwent cardiac CT and magnetic resonance imaging (MRI) were retrospectively selected. Using the voxel tracking of motion coherence algorithm, the peak CT MP-strain was measured using the 16-segment model. With the trans-mural extent of late gadolinium enhancement (LGE) and the distance from MI, all segments were classified into four groups (infarcted, border, adjacent, and remote segments); infarcted and border segments were defined as MI with LGE positive. Diagnostic performance of MP-strain for detecting MI was compared with per cent systolic wall thickening (%SWT) assessed by MRI using receiver-operating characteristic curve analysis at a segment level., Results: Of 672 segments excluding16 segments influenced by artefacts, 193 were diagnosed as MI. Sensitivity and specificity of peak MP-strain to identify MI were 81 % [95 % confidence interval (95 % CI): 74-88 %] and 86 % (81-92 %) compared with %SWT: 76 % (60-95 %) and 68 % (48-84 %), respectively. The area under the curve of peak MP-strain was superior to %SWT [0.90 (0.87-0.93) vs. 0.80 (0.76-0.83), p < 0.05]., Conclusions: CT MP-strain has a potential to provide incremental value to coronary CT angiography for detecting MI., Key Points: • CT MP-strain allows for three-dimensional assessment of regional cardiac function. • CT-MP strain has high diagnostic accuracy for detecting myocardial infarction. • CT-MP strain may assist in tissue characterisation of myocardium assessed by LGE-MRI. • CT-MP strain provides incremental values to coronary CTA for detecting myocardial infarction.

Background: Single-phase myocardial computed tomography perfusion (CTP) is useful for detecting myocardial ischemia, but determining the optimal scan time is difficult. The present study evaluated this by analyzing dynamic CTP data.Methods and Results:We retrospectively selected 32 patients, all of whom had undergone stress dynamic CTP and magnetic resonance myocardial perfusion imaging (MR-MPI). Myocardial ischemia was assessed by MR-MPI using the 16-segment model. Whole-heart dynamic CTP data were acquired for 30 consecutive heartbeats without spatial or temporal gaps using a wide-detector CT, and redistributed into 11 series of single-phase CTP acquired from -2 s to 8 s from the time of maximal enhancement (Tmax) in the ascending aorta. Single-phase CTP images were visually assessed at the segment level, and diagnostic performance of single-phase CTP images for detecting myocardial ischemia was compared with dynamic CTP. Of 512 segments, 177 segments (35%) were diagnosed as ischemic by MR-MPI. The diagnostic accuracy of single-phase CTP acquired at 2-6 s from Tmax in the ascending aorta (median 86%, range 84-87%) was comparable to that of dynamic CTP., Conclusions: The optimal scan time for detecting myocardial ischemia with single-phase CTP was at 2-6 s from Tmax in the ascending aorta. (Circ J 2016; 80: 2506-2512).

Purpose: To validate an on-site algorithm for computation of fractional flow reserve (FFR) from coronary computed tomographic (CT) angiography data against invasively measured FFR and to test its diagnostic performance as compared with that of coronary CT angiography., Materials and Methods: The institutional review board provided a waiver for this retrospective study. From coronary CT angiography data in 106 patients, FFR was computed at a local workstation by using a computational fluid dynamics algorithm. Invasive FFR measurement was performed in 189 vessels (80 of which had an FFR ≤ 0.80); these measurements were regarded as the reference standard. The diagnostic characteristics of coronary CT angiography-derived computational FFR, coronary CT angiography, and quantitative coronary angiography were evaluated against those of invasively measured FFR by using C statistics. Sensitivity and specificity were compared by using a two-sided McNemar test., Results: For computational FFR, sensitivity was 87.5% (95% confidence interval [CI]: 78.2%, 93.8%), specificity was 65.1% (95% CI: 55.4%, 74.0%), and accuracy was 74.6% (95% CI: 68.4%, 80.8%), as compared with the finding of lumen stenosis of 50% or greater at coronary CT angiography, for which sensitivity was 81.3% (95% CI: 71.0%, 89.1%), specificity was 37.6% (95% CI: 28.5%, 47.4%), and accuracy was 56.1% (95% CI: 49.0%, 63.2%). C statistics revealed a larger area under the receiver operating characteristic curve (AUC) for computational FFR (AUC, 0.83) than for coronary CT angiography (AUC, 0.64). For vessels with intermediate (25%-69%) stenosis, the sensitivity of computational FFR was 87.3% (95% CI: 76.5%, 94.3%) and the specificity was 59.3% (95% CI: 47.8%, 70.1%)., Conclusion: With use of a reduced-order algorithm, computation of the FFR from coronary CT angiography data can be performed locally, at a regular workstation. The diagnostic accuracy of coronary CT angiography-derived computational FFR for the detection of functionally important coronary artery disease (CAD) was good and was incremental to that of coronary CT angiography within a population with a high prevalence of CAD.

Objectives: Quantitative myocardial perfusion imaging by computed tomography (CT) was recently introduced to calculate myocardial blood flow (MBF). Because absolute MBF thresholds may be affected by technique, methodology, and the microvasculature, we investigated whether a relative measure of MBF improves accuracy to identify hemodynamically significant coronary stenosis., Materials and Methods: In this prospective study, 42 patients (mean [SD] age, 62.3[8.7] years; 8 women) with suspected or known coronary disease underwent dynamic CT myocardial perfusion imaging using adenosine vasodilation, before invasive angiography (coronary angiography) with fractional flow reserve (FFR). Within each myocardial territory MBF, the MBF relative to remote myocardium (MBFratio) was calculated and compared with coronary angiography and FFR., Results: Of the 91 vessels interrogated by FFR (median, 0.81; interquartile range, 0.73-0.94), 45 vessels (49%) had an FFR value lower than 0.8 and were considered hemodynamically significant. Hyperemic MBF was lower in ischemic territories: 75.6 ± 22.5 mL per 100 mL/min versus 98.3 ± 23.1 mL per 100 mL/min (P < 0.0001). The MBFratio correlated better with FFR (P = 0.76) than the absolute MBF did (P = 0.52). Receiver operating curve analysis showed better discrimination by MBFratio: area under the curve of 0.85 versus 0.75 (P = 0.02). The MBF of remote myocardium varied between 60.7 and 167.2 mL per 100 mL/min and was lower in patients without heart rate acceleration (P = 0.0035)., Conclusions: The MBFratio seems to better identify hemodynamically significant coronary artery disease than does the absolute MBF determined by dynamic CT perfusion imaging. This may be caused by microvascular status or related to the methodology.

Aims: Non-culprit plaques are responsible for a substantial number of future events in patients with acute coronary syndrome (ACS). In this study, we evaluated the prognostic implications of non-culprit plaques seen on coronary computed tomography angiography (CTA) in patients with ACS., Methods and Results: Coronary CTA was performed in 169 patients (mean 59 ± 11 years, 129 males) admitted with ACS. Data sets were assessed for the presence of obstructive non-culprit plaques (>50% luminal narrowing), segment involvement score, and quantitative measures of plaque burden, after censoring initial culprit plaques. Follow-up was performed for the occurrence of major adverse cardiovascular events (MACEs) unrelated to the initial culprit plaque; cardiac death, second ACS, or coronary revascularization after 90 days. After a median follow-up of 4.8 (IQR 2.6-6.6) years, MACE occurred in 36 (24%) patients: 6 cardiac deaths, 16 second ACS, and 14 coronary revascularizations. Dyslipidaemia (hazard ratio [HR] 3.1 [95% confidence interval 1.5-6.6]) and diabetes mellitus (HR 4.8 [2.3-10.3]) were univariable clinical predictors of MACE. Patients with remaining obstructive non-culprit plaques (HR 3.66 [1.52-8.80]) and higher plaque burden index (HR 1.22 [1.01-1.48]) had a more risk of MACE. In multivariate analysis, with diabetes, dyslipidaemia, and plaque burden index, obstructive non-culprit plaques (HR 3.76 [1.28-11.09]) remained an independent predictor of MACE., Conclusion: Almost a quarter of the study population experienced a new event arising from a non-culprit plaque during a follow-up of almost 5 years. ACS patients with remaining obstructive non-culprit plaques or high plaque burden have an increased risk of future MACE., (Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.)

Background: The purpose of this study was to evaluate a personalized protocol with diluted contrast material (CM) for coronary computed tomography angiography (CTA)., Methods and Results: One hundred patients with suspected coronary artery disease underwent retrospective electrocardiogram-gated coronary CTA on a 256-slice multidetector-row CT scanner. In the diluted CM protocol (n=50), the optimal scan timing and CM dilution rate were determined by the timing bolus scan, with 20% CM dilution (5ml/s during 10s) being considered suitable to achieve the target arterial attenuation of 350 Hounsfield units (HU). In the body weight (BW)-adjusted protocol (n=50, 222mg iodine/kg), only the optimal scan timing was determined by the timing bolus scan. The injection rate and volume in the timing bolus scan and real scan were identical between the 2 protocols. We compared the means and variations in coronary attenuation between the 2 protocols. Coronary attenuation (mean±SD) in the diluted CM and BW-adjusted protocols was 346.1±23.9 HU and 298.8±45.2 HU, respectively. The diluted CM protocol provided significantly higher coronary attenuation and lower variance than did the BW-adjusted protocol (P<0.05, in each)., Conclusions: The diluted CM protocol facilitates more uniform attenuation on coronary CTA in comparison with the BW-adjusted protocol.

Background: The aim of this study was to investigate the correlation of the qualitative transmural extent of hypoperfusion areas (HPA) using stress dynamic whole-heart computed tomography perfusion (CTP) imaging by 256-slice CT with CTP-derived myocardial blood flow (MBF) for the estimation of the severity of coronary artery stenosis., Methods and Results: Eleven patients underwent adenosine triphosphate (0.16 mg/kg/min, 5 min) stress dynamic CTP by 256-slice CT (coverage: 8 cm, 0.27 s/rotation), and 9 of the 11 patients underwent coronary angiography (CAG). Stress dynamic CTP (whole-heart datasets over 30 consecutive heart beats in systole without spatial and temporal gaps) was acquired with prospective ECG gating (effective radiation dose: 10.4 mSv). The extent of HPAs was visually graded using a 3-point score (normal, subendocardial, transmural). MBF (ml/100g/min) was measured by deconvolution. Differences in MBF (mean ± standard error) according to HPA and CAG results were evaluated. In 27 regions (3 major coronary territories in 9 patients), 11 coronary stenoses (> 50% reduction in diameter) were observed. In 353 myocardial segments, HPA was significantly related to MBF (P < 0.05; normal 295 ± 94; subendocardial 186 ± 67; and transmural 80 ± 53). Coronary territory analysis revealed a significant relationship between coronary stenosis severity and MBF (P < 0.05; non-significant stenosis [< 50%], 284 ± 97; moderate stenosis [50-70%], 184 ± 74; and severe stenosis [> 70%], 119 ± 69)., Conclusion: The qualitative transmural extent of HPA using stress whole-heart dynamic CTP imaging by 256-slice CT exhibits a good correlation with quantitative CTP-derived MBF and may aid in assessing the hemodynamic significance of coronary artery disease.

We attempted to assess coronary artery flow using adenosine-stress and dual-energy mode with dual-source CT (DE-CT). Data of 18 patients with suspected coronary arteries disease who had undergone cardiac DE-CT were retrospectively analyzed. The patients were divided into two groups: 10 patients who performed adenosine stress CT, and 8 patients who performed rest CT as controls. We reconstructed an iodine map and composite images at 120 kV (120 kV images) using raw data with scan parameters of 100 and 140 kV. We measured mean attenuation in the coronary artery proximal to the distal portion on both the iodine map and 120 kV images. Coronary enhancement ratio (CER) was calculated by dividing mean attenuation in the coronary artery by attenuation in the aortic root, and was used as an estimate of coronary enhancement. Coronary stenosis was identified as a reduction in diameter of >50% on CT angiogram, and myocardial ischemia was diagnosed by adenosine-stress myocardial perfusion scintigraphy. The iodine map showed that CER was significantly lower for ischemic territories (0.76 ± 0.06) or stenosed coronary arteries (0.77 ± 0.06) than for non-ischemic territories (0.95 ± 0.21, P=0.02) or non-stenosed coronary arteries (1.07 ± 0.33, P<0.001). The 120 kV images showed no difference in CER between these two groups. Use of CER on the iodine map separated ischemic territories from non-ischemic territories with a sensitivity of 86% and a specificity of 75%. Our quantification is the first non-invasive analytical technique for assessment of coronary artery flow using cardiac CT. CER on the iodine map is a candidate method for demonstration of alteration in coronary artery flow under adenosine stress, which is related to the physiological significance of coronary artery disease., (© The Author(s) 2010.)

Background: Multidetector-row computed tomography (MDCT) applications have expanded to evaluation of myocardial blood flow (MBF) and viability. We quantified regional MBF pre- and post-coronary artery bypass grafting (CABG) using adenosine stress and cardiac 64-MDCT, and investigated whether the results predict MBF and left ventricular (LV) function recovery after CABG., Methods: We studied 321 regions in 19 CABG patients who underwent adenosine stress 64-row MDCT perfusion imaging and cine magnetic resonance imaging pre- and post-CABG. Myocardial blood flow was estimated from linear regression equation slopes using Patlak plot analyses and compared with LV function by measuring wall thickening (%WT) using cine magnetic resonance imaging., Results: Overall mean MBFs were 1.39 +/- 0.49 and 1.95 +/- 0.49 mL/(g min) pre- and post-CABG (P < .0001). Myocardial blood flow in revascularized areas increased significantly (pre-CABG 1.18 +/- 0.45, post-CABG 1.99 +/- 0.66 mL/[g min], P < .001), whereas nonischemic areas showed no difference (1.79 +/- 0.70 and 1.97 +/- 0.46 mL/[g min], P = .14). Revascularized areas with preoperative MBF > or = 0.9 mL/(g min) showed significantly greater MBF improvement than those with preoperative MBF <0.9 mL/(g min) (P = .04). In patients with preoperative LV dysfunction (ejection fraction <40%), %WT in revascularized areas with pre-CABG MBF > or = 0.9 mL/(g min) improved significantly after CABG (pre-%WT 40.9 +/- 22.9, post-%WT 52.8 +/- 20.6, P = .03) versus those with pre-CABG MBF <0.9 mL/(g min) (pre-%WT 53.2 +/- 35.5, post-%WT 42.5 +/- 17.0, P = .40)., Conclusions: Our results demonstrated more significantly increased MBF post-CABG than pre-CABG, particularly in revascularized areas. Regional MBF before CABG may predict MBF and LV function recovery, in the short term, after CABG., (2010 Mosby, Inc. All rights reserved.)

Background: The feasibility of using cardiac multidetector-row computed tomography (MDCT) technology in the quantitative assessment of myocardial blood flow (MBF) using the adenosine triphosphate (ATP) load technique was investigated in the present study., Methods and Results: The study group comprised 14 patients (11 men, 3 women, age range 52-79 years, mean age 69.2 years) who underwent cardiac cine MDCT using the ATP-load technique. MBF was estimated from the slope of the linear regression equation with Patlak plots analysis. The overall average MBF was 1.83+/-0.62 ml . g(-1) . min(-1). Mean MBF in territories with stenosis on coronary angiography was 1.19+/-0.36 ml . g(-1) . min(-1) and 2.06+/-0.54 ml . g(-1) . min(-1) (p<0.01) in territories without stenosis. The average MBF in territories with moderate to severe ischemia on myocardial perfusion scintigraphy was 1.32+/-0.14 ml .g(-1 ). min(-1 )and 1.95+/-0.64 ml . g(-1) . min(-1) (p<0.01) in territories without ischemia., Conclusion: MDCT can be used to quantify MBF using first-pass dynamic data.

Purpose: The purpose of this study was to investigate the feasibility of retrospective electrocardiography-gated multidetector-row computed tomography (MDCT) in the assessment left ventricular (LV) wall thickness and thickening and to test its validity compared to cine magnetic resonance imaging (MRI) as a standard of reference., Materials and Methods: We enrolled 19 patients who underwent both cardiac MDCT and cine MRI. End-diastolic wall thickness (EDWT) and end-systolic wall thickness (ESWT) were measured in 16 myocardial segments. Percent systolic wall thickening (%SWT) was generated from the EDWT and ESWT. Nondiagnostic myocardial segments were excluded. Correlation and agreement between MDCT and cine MRI were analyzed., Results: Segmental assessability values were 86.2% (262/304) and 92.1% (280/304) for MDCT and cine MRI, respectively. In assessable segments by both modalities (80.9%, 246/304), a significant correlation between MDCT and MRI was found (r = 0.89, 0.85, and 0.61, for EDWT, ESWT, and %SWT, respectively; all P < 0.05). Mean EDWT and ESWT values by MDCT were slightly lower than those by cine MRI (9.8 +/- 3.6 vs. 10.0 +/- 3.7 mm and 13.8 +/- 4.4 vs. 14.1 +/- 4.3 mm, respectively; both P < 0.01). Bland-Altman analysis revealed acceptable limits of agreement between MDCT and Cine MRI., Conclusion: MDCT is a feasible method to assess regional LV wall thickness and systolic thickening.

Purpose: Along with the increase of detector rows on the z-axis and a faster gantry rotation speed, the spatial and temporal resolutions of the multislice computed tomography (CT) have been improved for noninvasive coronary artery imaging. We investigated the feasibility of the second specification prototype 256-detector row four-dimensional CT for assessing coronary artery and cardiac function., Materials and Methods: The subjects were five patients with coronary artery disease. Contrast medium (40-60 ml) was intravenously administered at the rate of 3-4 ml/s. The patient's whole heart was scanned for 1.5 s to cover at least one cardiac cycle during breathholding without electrocardiographic gating. Parameters used were 0.5 mm slice thickness, 0.5 s/rotation, 120 Kv, and 350 mA, with a half-scan reconstruction algorithm (temporal resolution 250 ms). Twenty-six transaxial datasets were reconstructed at intervals of 50 ms., Results: The assessability of the coronary arteries in AHA segments 1, 2, 3, 5, 6, 7, 9, and 11 was visually evaluated, resulting in 29 of 32 (90.9%) segments being assessable. Functional assessment was also performed using animated movies without banding artifacts in all cases., Conclusions: The 256-detector row four-dimensional CT can assess the coronary artery and cardiac function using data during 1.5 s without banding artifacts.

Purpose: Using the raw data from coronary computed tomography (CT) angiography, multislice CT (MSCT) can be used to evaluate cardiac function. However, the accuracy of left ventricular (LV) wall motion assessment by MSCT has not been thoroughly investigated. We investigated whether 16-channel MSCT could accurately assess LV wall motion by comparing its results with those of conventional biplane left ventriculography (LVG)., Materials and Methods: The study included 20 patients with various kinds of heart disease. All patients underwent both contrast-enhanced MSCT and biplane LVG. Using a retrospective electrocardiography-gating technique, 10 phases over one cardiac cycle were extracted. The left ventricle was divided into seven segments according to the American Heart Association classification. Wall motion was scored as follows: 1, normal; 2, mild to moderate hypokinesis; 3, severe hypokinesis; 4, akinesis; 5, dyskinesis; and 6, aneurysm. The scores obtained by MSCT were compared with those obtained by LVG. The wall motion scores were analyzed using the chi-squared independence test (6 x 6 contingency table)., Results: Wall motion could be assessed in all segments of the 20 patients using interactive multiplanar animation. Among a total of 140 segments in 20 patients, scores in 118 were concordant between MSCT and LVG (118/140, 84.3%)., Conclusion: The 16-MSCT can accurately assess LV wall motion.

Background and Purpose: Recent advances in the equipment and technology for endovascular surgery have led to an increasing number of patients undergoing this procedure to treat various lesions. The purpose of this study was to investigate the efficacy of early-stage endovascular surgery to treat growing acute epidural hematomas (AEDHs)., Methods: Over a period of 2.5 years, endovascular intervention was performed in nine patients with AEDHs, as shown by the extravasation of contrast medium and the recognition of growing hematomas on CT scans. Embolization was performed by using catheters superselectively advanced with a microguidewire until it reached the area just before the bleeding point., Results: In all nine cases, bleeding from the middle meningeal artery ceased immediately after treatment, and further surgical intervention was avoided. In three of five patients with additional lesions, surgical intervention was also conducted to treat an acute subdural hematoma (two patients) or a contusion hematoma (one patient); in two cases, these lesions were located on the contralateral side., Conclusion: In patients with thin AEDHs in the early stage, angiography followed by endovascular intervention allows for conservative treatment. Notable clinical benefits can be achieved in patients with complicated, multiple lesions.