Search

Summary: Bridgeless ac‐dc converters are the optimal choice for many applications, as they offer many advantages such as low distorted supply current, high power factor, and improved efficiency. This paper presents a new topology for a single‐phase bridgeless ac‐dc converter. The proposed hybrid topology is based on integrating the inverting and non‐inverting buck‐boost dc‐dc converters that are connected to the ac supply through an LC filter. To insure sinusoidal supply current, the proposed hybrid bridgeless ac‐dc converter is operated in discontinuous current mode. The proposed converter has many merits, such as a reduced number of components, enhanced efficiency, and soft start‐up capability. The operation modes and design of the proposed converter are presented. In addition, a design method is proposed for the input LC filter to minimize the voltage stress across switches. Moreover, a small signal model for the proposed converter is developed. The proposed converter topology is simulated to evaluate the dynamic behavior and verify the accuracy of the presented small signal model. Furthermore, an 850 W prototype is developed to validate the features of the proposed converter experimentally. Tight voltage regulation, sinusoidal supply current, and near‐to‐unity power factor operation are observed from the results, regardless of supply or load disturbances. [ABSTRACT FROM AUTHOR]

The modular multilevel converter (MMC) is a promising candidate for high-/medium-voltage high-power applications such as medium voltage ac drives due to its modularity, reliability, and scalability. The main challenge of a conventional MMC is low-frequency operation. Capacitor voltage ripple is inversely proportional to the operating frequency. Hence, operating at low frequency necessitates employing large submodule capacitances to limit voltage ripple or the utilization of energy equalization modules (EEMs). The first option negatively affects converter lifetime, and the second option requires a large number of semiconductor devices and isolating transformers. In this article, a modified MMC topology with self-energy equalization is proposed to ensure converter operation with balanced capacitor voltages with low ripple during zero-/low-frequency conditions. Operating with balanced capacitor voltages with low ripple is achieved by maintaining the same energy level in the involved upper and lower arms. A low device count alternative to the EEMs approach is proposed in this work. Detailed illustration of the operational concept and design of the associated passive components is presented. The performance of the proposed medium voltage ac drive is elucidated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

High-voltage (HV) pulse generators (PGs) are the core of pulsed electric field applications. Applying HV pulses produces electrical pores in a biological cell membrane, in which if the size of the pores increases beyond a critical size, the cell will not survive. This paper proposes a new HV-PG based on the modular multilevel converter with full-bridge submodules (FB-SMs). In order to alleviate the need of complicated sensorless or sensor-based voltage balancing techniques for the FB-SM capacitors, a dedicated self-regulating charging circuit is connected across each FB-SM capacitor. The individual capacitor charging voltage level is obtained from three successive stages, namely, convert the low-voltage dc input voltage to a high-frequency square ac voltage, increase the ac voltage level via a nanocrystalline step-up transformer, and rectify the secondary transformer ac voltage via a diode FB rectifier. The HV bipolar pulses are formed across the load in a fourth stage through series connected FB-SMs. The flexibility of inserting and bypassing the FB-SM capacitors allows the proposed topology to generate different pulse-waveform shapes, including rectangular waveforms with specifically reduced dv/dt and ramp pulses. The practical results, from a scaled-down experimental rig with five FB-SMs and a 1-kV peak-to-peak pulse output, validate the proposed topology. [ABSTRACT FROM PUBLISHER]

This article presents an isolated high-frequency (HF) multiport dc–dc converter for photovoltaics (PV) interfacing systems. In the proposed multiport converter, an HF transformer with multiple input windings and single output winding is utilized. Each input port is based on a proposed two-quadrant inverter topology, which connects a PV module to the HF transformer. The output port is tied to a dc bus using a rectifier. The proposed two-quadrant inverter topology prevents current flow from the ac side to the dc side. This action prevents circulating currents between different ports. Each two-quadrant inverter is controlled to harvest maximum power from its associated PV module. The analysis and operation scenarios of the proposed multiport converter are discussed. PSCAD/EMTDC software package is used to simulate the proposed PV interfacing system to investigate the operation of the proposed multiport converter topology and to examine the dynamic system behavior. In addition, an experimental prototype is developed to validate the operation scenarios of the proposed multiport dc–dc converter and to examine the performance of the presented PV interfacing system. [ABSTRACT FROM AUTHOR]

This paper proposes a medium-/high-voltage high-power hybrid modular dc–dc converter to interconnect two different dc-voltage levels in medium-/high-voltage dc grids. The converter consists of half-bridge submodules (SMs) rated at a moderate voltage level, i.e., series connection of semiconductor devices is avoided while connecting two high dc-voltage levels. The proposed architecture provides self-balancing operation, i.e., unlike conventional modular converters, no need for capacitor voltage measurement, which enhances the system reliability and simplicity. Sequential charging/discharging of SMs capacitors is adopted in the proposed approach to ensure a self-balanced operation. The proposed architecture can provide a high conversion ratio as well as power transfer in both directions, i.e., bidirectional dc–dc converter. Detailed illustration of the proposed approach operational concept, design, and overall control system is presented. Simulation and experimental results are presented to show the viability of the proposed configuration and validate the claims. [ABSTRACT FROM AUTHOR]