Search

In this paper, a technique of variable-turns-ratio high-frequency link inverter is proposed to provide a simple method to achieve multi-level outputs for the isolated single-stage high-frequency link inverters. By dynamically adjusting the turns ratio of transformer, five-level (±2, ±1, and 0) outputs can be achieved to improve the current quality. The single transformer, compared with the existing two-level high-frequency link inverter, is employed in the structure and only a few auxiliary devices are added, where the added circuit operates at low frequency and the power density is refined. Based on this technique, the single-stage active clamped forward grid-connected inverter with variable turns ratio is taken as an example to better illustrate the analysis process and a 1000-W prototype is designed and established to evaluate the output performance. The conducted simulation results and prototype tests verify the feasibility of the proposed single-stage variable-turns-ratio high-frequency link grid-connected inverter. [ABSTRACT FROM AUTHOR]

Transformerless photovoltaic (PV) inverters are more widely adopted due to high efficiency, low cost, and light weight, etc. Many novel topologies and their corresponding modulation methods have been proposed, verified, and put into use, solely focusing on active power injection without leakage current issues. However, some new grid codes require PV inverters to have the ability of injecting reactive power into the utility for grid support. In order to map the challenge, an improved hybrid modulation method is proposed and evaluated for one nonisolated H6 topology as an example. With only simple modification for switching patterns and phase shift for current reference, the variable reactive power generation ability with zero crossing distortion is achieved, while the common mode voltage is also eliminated. The operation modes with the improved hybrid modulation approach are presented in detail and some design considerations are also provided. Extensive results from a 4-kVA prototype along with the SMPLIS simulation verify the proposed hybrid modulation method. [ABSTRACT FROM AUTHOR]

A novel interleaved dual buck full-bridge three-level inverter (IDBFTI) is proposed for the grid-connected system in this paper. It retains the advantages of interleaved parallel technology for inverter as follows: reducing the output ripple current and the total harmonic distortion of the output current, increasing the power density of system, and reducing the current stress and thermal stress of power devices. Besides, it can solve the problem of zero sequence circulation current (ZSCC) in interleaved inverter system by the circuit structure, and it also has the advantages of no shoot-through problem, no reverse recovery of the body diode, and three-level output. The interleaved inverter circuits share two power-frequency switches, which are resized for each specific application, and it is easier to extend the system by improving current capability of the two switches. The working principle of this system is introduced in detail, and a 2-kW experimental prototype has been established and tested. Test results verify the principle and the excellent performance of IDBFTI. [ABSTRACT FROM PUBLISHER]

The main contribution of this paper is the derivation rules summarized from existing high-performance inverters with H6-type configuration, which makes novel topologies possible. In addition, a novel high-efficiency single-phase transformerless photovoltaic inverter with hybrid modulation method is also proposed and evaluated as an example. Without input split capacitors, common-mode voltage and leakage current issues in a nonisolated system with H6-type configuration are eliminated, and the feature of a three-level output voltage in the inverter bridge's middle point helps inductors and power quality optimization. The detailed operation principles with hybrid modulation strategy combined with unipolar and bipolar pulsewidth modulation schemes are presented. Experimental results of a 2200VA prototype verify the proposed topology with hybrid modulation method. [ABSTRACT FROM PUBLISHER]