Search

Voltages of series-connected batteries gradually become imbalanced due to nonuniformity in terms of not only battery characteristics but also self-discharge rate that is significantly dependent on temperature. In large-scale energy storage systems, a large temperature gradient is very likely because of its huge geometry, and therefore, equalizers capable of relatively large equalization currents would be necessary to eliminate voltage imbalance originating from uneven temperature distribution. A two-switch string-to-battery voltage equalizer using a half-bridge converter with multistacked current doublers (MSCDs) is proposed for series-connected batteries in this paper. The proposed equalizer is capable of providing relatively large equalization currents without increasing ripple currents thanks to the interleaved operation of the MSCDs. Fundamental operational analysis for a discontinuous conduction mode, in which currents in the equalizer can be limited to desired levels without feedback control, is performed. The experimental results of equalization tests performed for four supercapacitor modules and lithium-ion batteries connected in series demonstrated the equalization performance of the proposed equalizer. [ABSTRACT FROM AUTHOR]

To prevent partial-shading issues in photovoltaic (PV) systems, various kinds of voltage equalizers that virtually unify characteristics of shaded and unshaded modules have been proposed. Although PV string utilization can be dramatically improved, PV systems tend to be complex and costly because, in addition to the main converter for string control, voltage equalizers are separately necessary. This paper proposes the single-switch single-magnetic pulse width modulation (PWM) converter integrating the voltage equalizer using the series-resonant voltage multiplier (SRVM) for standalone PV systems. By utilizing a square wave voltage generated across a filter inductor in a PWM buck converter for driving the SRVM, the main PWM converter and voltage equalizer can be integrated into a single unit with reducing the total switch and magnetic component counts, achieving not only system-level but also circuit-level simplifications. The experimental test using the prototype for three PV modules connected in series was performed emulating a partial-shading condition. The integrated converter effectively precluded the partial-shading issues and significantly improved the power available at a load, demonstrating its efficacy. [ABSTRACT FROM AUTHOR]

Various kinds of differential power processing converters and voltage equalizers have been proposed for series-connected photovoltaic (PV) modules to prevent negative influences of partial shading, such as significant reduction in power generation and the occurrence of multiple maximum power points (MPPs), including local and global MPPs, that hinders and confuses MPP tracking algorithms to operate properly. However, since conventional topologies are based on multiple individual dc–dc converters, the required switch count increases proportionally to the number of modules connected in series, increasing the complexity. A two-switch voltage equalizer using an LLC resonant inverter and voltage multiplier is proposed in this paper. The circuitry can be dramatically simplified compared with conventional topologies due to the two-switch configuration. Detailed operation analyses for the LLC resonant inverter and voltage multiplier are separately performed. Experimental equalization tests emulating partially shaded conditions were performed for four PV modules connected in series. With the proposed voltage equalizer, local MPPs successfully disappeared, and extractable maximum power increased compared with those without equalization, demonstrating the effectiveness and performance of the proposed voltage equalizer. [ABSTRACT FROM PUBLISHER]

Cell voltage equalization is inevitable to ensure years of safe operation of series-connected energy storage cells, such as lithium-ion batteries and supercapacitors (SCs). Although various kinds of cell voltage equalizers have been proposed, most equalizer topologies require multiple switches and/or a multiwinding transformer, resulting in complex circuitry and poor modularity. In this paper, a single-switch single-transformer equalizer using a forward–flyback resonant inverter (FFRI) with a voltage multiplier is proposed. The required switch count of the proposed equalizer is the minimum without impairing modularity due to the single-switch circuitry with no need for a multiwinding transformer. An experimental equalization test performed for eight SCs connected in series successfully demonstrated the equalization performance of the proposed equalizer. The FFRI can be extended as a “resonant input cell,” and by combining one of resonant input cells and a voltage multiplier, a single-switch resonant equalization charger that is basically a charger with an equalization function is also derived. An experimental charging test using the resonant equalization charger was also performed, and its equalization-charging performance was demonstrated. [ABSTRACT FROM AUTHOR]