Search

This article proposes a method of generating 24-sided polygonal voltage space vector structure composed of 24 real active vectors and a zero vector. Each active vector is a real vector in contrast to switched average vectors in literature. Generation of real 24-sided vectors minimizes switching losses and improves quality of phase voltage compared to switched averaged vectors technique. An important feature of the presented scheme is elimination of lower order harmonics up to 19th order from motor phase voltage throughout the modulation range that gives reduction in torque pulsation and near sinusoidal phase current. The proposed scheme extends the linear modulation range till 99.42 $\%$. Open-end winding induction motor is fed with primary and secondary inverters from either ends. Primary and secondary inverters are implemented by cascading two-level inverters. DC sources for both the inverters are realized using a simple star-delta transformer combination. The proposed concepts are verified with laboratory prototype and the respective results during the steady-state, transient, and fault scenario are presented. The supporting loss analysis and harmonic performance of the proposed drive is performed with existing topologies. [ABSTRACT FROM AUTHOR]

This article introduces a hybrid nine-level inverter topology with extended dc-bus utilization for operation at over modulation range without the presence of lower order harmonics (predominantly fifth and seventh) when compared to conventional two-level and multilevel inverter with hexagonal voltage space vector structure. The proposed inverter is a cascade of a five-level T-type unit and an H-bridge (HB) unit. An increase in the dc-bus utilization is possible by increasing the pole voltage levels to ± (Vdc/2 + Vdc/8) using the HB capacitor voltage and also the capacitor voltages are balanced by adding a offset to sine reference. The aforementioned pulsewidth modulation strategy allows us to increase the peak phase fundamental voltage from 0.577Vdc to 0.625Vdc in case of unity power factor (p.f) load and to 0.637Vdc for 0.82 p.f load with the proposed nine-level inverter. The limiting factor on increasing the dc bus utilization such as p.f, HB capacitor balancing are analysed broadly in this article. The proposed inverter scheme and its claim of increasing the peak phase fundamental voltage is experimentally validated in a laboratory prototype. [ABSTRACT FROM AUTHOR]

In this article, a method is proposed for the first time, to increase the linear modulation range till full base speed irrespective of load power factor for a multilevel inverter fed induction motor drive. A five-level inverter with a single dc source is used for the proposed scheme. Using this method, linear pulsewidth modulation (PWM) operation of the inverter can be achieved till peak phase fundamental voltage of 0.637 Vdc without exceeding machine phase voltage rating. This method eliminates all the lower order harmonics from machine phase voltage till the full speed range of operation. The proposed five-level inverter scheme is realized by cascading a two-level inverter with a capacitor fed H-bridge, feeding open-end induction motor drive from one end and a capacitor fed two-level inverter from the other end. The proposed scheme uses space vector redundancy to balance all the capacitors during its operation. Operation of the proposed drive is analyzed extensively for normal five-level operation as well as during the extended modulation range. Experimental results for steady state and transient state operation are presented to validate the proposed scheme [ABSTRACT FROM AUTHOR]

This paper presents a 5-level inverter topology for open-end induction motor drives by using a single dc source. The open stator windings of the drive are supplied with a 3-level flying capacitor inverter from one end and capacitor-fed 2-level inverter from another end. The voltage ratio of the dc link to the capacitor in 2-level inverter is maintained at 4:1 ratio to generate five-level voltage output. The capacitor in 2-level inverter is balanced by the switching redundant vector combinations from both the inverters while the floating capacitors in the 3-level inverter are balanced by using redundant switching states. The proposed topology gives 5-level operation with less number of floating capacitors and power semiconductor switches compared to other existing topologies. Also, the balancing of the capacitors is independent of load power factor and modulation index. Further, the generalization of the proposed dual inverter scheme for any n-level inverter is also included in this paper. The experimental results and required analysis are also presented to validate the inverter scheme. [ABSTRACT FROM AUTHOR]

In this article, a nine-level multilevel topology is proposed by stacking of low voltage basic inverter cells and then cascading with H-bridges. The dc-link is split into four equal halves by series-connected capacitors from a common dc-link. Three common coupling points (CCPs) are formed due to the stacking of four capacitors, which are connected across the dc-link. The CCP voltage balancing is ensured by drawing or injecting zero instantaneous currents from each of these points at any instant. A six-phase symmetrical IM is used to generate equal and opposite instantaneous phase currents by applying exactly equal and opposite phase voltages for two opposite phases from the six-phase inverter. Simultaneously, the capacitor voltage balancing of H-bridge inverter cells is also achieved by proper selection of redundancies from the available pole voltage redundancies. The concept is verified with a nine-level inverter laboratory prototype, which consists of a five-level stacked inverter, and followed by two low voltage cascaded H-bridge inverters in each phase. Detailed experimental results of steady-state and transient conditions are included to validate the proposed scheme. [ABSTRACT FROM AUTHOR]