Search

This paper deals with the protection of critical loads from voltage-related power quality issues using a dynamic voltage restorer (DVR). A generalized control algorithm based on instantaneous space phasor and dual $P$ - $Q$ theory has been proposed to generate the instantaneous reference voltages to compensate the load voltages with direct power flow control. The proposed algorithm adapts energy-optimized series voltage compensation, which results in a reduction of energy storage requirement. The proposed DVR control scheme can support the load from voltage-related power quality issues irrespective of the load current profile. Each leg of the three-phase three-leg split capacitor inverter is used to inject series compensation voltage in respective phases of the system. Model-based computer simulation studies and real-time experimental results validate the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]

In this paper, fast acting dc-link voltage-based energy management schemes are proposed for a hybrid energy storage system fed by solar photovoltaic (PV) energy. Using the proposed control schemes, quick fluctuations of load are supplied by the supercapacitors and the average load demand is controlled by the batteries. Fast dc-link voltage, effective energy management, and reduced current stress on battery are the main features achieved from the proposed control schemes. The effectiveness of the proposed control schemes are compared with the unified cascaded control. Small-signal control gains are formulated to design the voltage and current loops of the proposed energy management schemes. Detailed stability analysis is also presented to find the boundary values of compensator gains. In addition, a high-gain PV converter is proposed for extraction of maximum power from the solar panels. High voltage gain, reduced reverse recovery of diodes, and less duty cycle operation are the key features obtained from the proposed high-gain converter. The validity of the proposed energy management schemes with high-gain converter is verified by the detailed simulation and experimental studies. [ABSTRACT FROM AUTHOR]

Dynamic voltage restorer (DVR) is a definitive solution toward compensation of voltage sag with phase jump. Conventional DVR topologies, however, have dc links and two-stage power conversions. This increases its size, cost, and associated losses. Therefore, topologies without the dc link, mitigating sag by utilizing direct ac–ac converters, are preferable over the conventional ones. As no storage device is employed, compensation by these topologies is limited only by the voltages at the point of common coupling that is feeding the converters. In this paper, a direct-ac–ac-converter-based topology fed with line voltages is proposed. The arrangement provides increased range of compensation in terms of magnitude and phase angle correction. Detailed simulations have been carried out in MATLAB to compare the capability of the proposed topology with other similar topologies. Experimental results are presented to validate the capability of the topology to compensate various sags. [ABSTRACT FROM PUBLISHER]

This paper proposes an improved hybrid distribution static compensator (DSTATCOM) topology to address some practical issues such as power rating, filter size, compensation performance, and power loss. An $LCL$ filter has been used at the front end of a voltage source inverter (VSI), which provides better switching harmonics elimination while using much smaller value of an inductor as compared with the traditional $L$ filter. A capacitor is used in series with an $LCL$ filter to reduce the dc-link voltage of the DSTATCOM. This consequently reduces the power rating of the VSI. With reduced dc-link voltage, the voltage across the shunt capacitor of the $LCL$ filter will be also less. It will reduce the power losses in the damping resistor as compared with the traditional $LCL$ filter with passive damping. Therefore, the proposed DSTATCOM topology will have reduced weight, cost, rating, and size with improved efficiency and current compensation capability compared with the traditional topology. A systematic procedure to design the components of the passive filter has been presented. The effectiveness of the proposed DSTATCOM topology over traditional topologies is validated through both simulation and experimental studies. [ABSTRACT FROM PUBLISHER]

Converter system that does both dc–dc conversion and dc–ac conversion in a single stage is called a single-stage converter system (SSCS). Compared to a two-stage converter, SSCS is more efficient and compact in size. In this paper, a grid-connected SSCS (GCSS) system for photovoltaic (PV) applications is presented. This GCSS transfers power from PV to grid while tracking maximum power point (MPP) continuously. The proposed system has several desirable features such as low switching loss, high gain, and compact size that makes this GCSS suitable for PV systems, where the PV system output voltage is low and varies with time. Design of the presented GCSS components with necessary equations and derivation of both current control loop and voltage control loop required for operation are given. Proposed GCSS is simulated using MATLAB/SIMULINK. Detailed simulation and experimental results are given to verify the efficacy of the proposed GCSS. [ABSTRACT FROM AUTHOR]

The unified power quality conditioner (UPQC) is a custom power device, which mitigates voltage and current-related PQ issues in the power distribution systems. In this paper, a UPQC topology for applications with non-stiff source is proposed. The proposed topology enables UPQC to have a reduced dc-link voltage without compromising its compensation capability. This proposed topology also helps to match the dc-link voltage requirement of the shunt and series active filters of the UPQC. The topology uses a capacitor in series with the interfacing inductor of the shunt active filter, and the system neutral is connected to the negative terminal of the dc-link voltage to avoid the requirement of the fourth leg in the voltage source inverter (VSI) of the shunt active filter. The average switching frequency of the switches in the VSI also reduces, consequently the switching losses in the inverters reduce. Detailed design aspects of the series capacitor and VSI parameters have been discussed in the paper. A simulation study of the proposed topology has been carried out using PSCAD simulator, and the results are presented. Experimental studies are carried out on three-phase UPQC prototype to verify the proposed topology. [ABSTRACT FROM PUBLISHER]