Search

The team sprint (TS) is a three‐lap pursuit and the most revered event in track sprint cycling. The opening lap of the TS is an important determinant to the overall performance. But despite it being the most controlled and repeatable task in track sprint cycling, very little data are available to better understand the performance of the opening lap. The aim of this study was split into three‐parts: part one, to better understand the profile and the indices thought to be determinants of the opening lap of the TS in elite sprint track cyclists. Part two of the study examined all available timing splits (15, 65, 125 and 250 m) from 36 standing‐start laps. Part three of the study examined the peak torque outputs and peak power outputs of different various starts performed over a 3‐month period. The results showed time to 125 m exhibited a near perfect relationship with starter lap performance. Very strong relationships were seen with 15 and 65 m split times and final lap performance. Peak torque of the lead starting leg and peak power output were shown to be highly predictive 15 m, 65 and 125 m performance in training. These data suggested the first 15 m is highly important and predicts a disproportionately high level of final opening lap time performance. Therefore, it is likely that peak power output normalised to system mass and peak torque of lead leg is a strong determinant of overall performance in the TS. [ABSTRACT FROM AUTHOR]

Purpose: To assess the association between the W′ and measures of neuromuscular function relating to the capacity of skeletal muscle to produce force in a group of elite cyclists. Methods: Twenty-two athletes specializing in a range of disciplines and competing internationally volunteered to participate. Athletes completed assessments of maximum voluntary torque (MVT), voluntary activation, and isometric maximum voluntary contraction to measure rate of torque development (RTD). This was followed by assessment of peak power output (PPO) and 3-, 5-, and 12-minute time trials to determine critical power. Pearson correlation was used to examine associations with critical power and W′. Goodness of fit was calculated, and significant relationships were included in a linear stepwise regression model. Results: Significant positive relationships were evident between W′ and MVT (r =.82), PPO (r =.70), and RTD at 200 milliseconds (r =.59) but not with RTD at 50 milliseconds and voluntary activation. Correlations were also observed between critical power and RTD at 200 milliseconds and MVT (r =.54 and r =.51, respectively) but not with PPO, voluntary activation, or RTD at 50 milliseconds. The regression analysis found that 87% of the variability in W′ (F1,18 = 68.75; P <.001) was explained by 2 variables: MVT (81%) and PPO (6%). Conclusions: It is likely that muscle size and strength, as opposed to neural factors, contribute meaningfully to W′. These data can be used to establish training methods to enhance W′ to improve cycling performance in well-trained athletes. [ABSTRACT FROM AUTHOR]

Sprint cycling performance is heavily dependent on mechanical peak power output (PPO) and the underlying power- and torque-cadence relationships. Other key indices of these relationships include maximum torque (TMAX), cadence (CMAX) and optimal cadence (COPT). Two common methods are used in the laboratory to ascertain PPO: isovelocity and isoinertial. Little research has been carried out to compare the magnitude and reliability of these performance measures with these two common sprint cycling assessments. The aim of this study was to compare the magnitude and reliability of PPO, TMAX , CMAX and COPT measured with isovelocity and isoinertial sprint cycling methods. Two experimental sessions required 20 trained cyclists to perform isoinertial sprints and then isovelocity sprints. For each method, power-cadence and torque-cadence relationships were established, and PPO and COPT were interpolated and TMAX and CMAX were extrapolated. The isoinertial method produced significantly higher PPO (p<0.001) and TMAX (p<0.001) than the isovelocity method. However, the isovelocity method produced significantly higher COPT (p<0.001) and CMAX (p=0.002). Both sprint cycling tests showed high levels of between-session reliability (isoinertial 2.9–4.4%; isovelocity 2.7–4.0%). Functional measures of isovelocity and isoinertial sprint cycling tests were highly reliable but should not be used interchangably. [ABSTRACT FROM AUTHOR]

Neuromuscular activation is considered an important determinant sprint cycling performance but requires reliable EMG amplitude measurements to facilitate sensitive assessments. The reliability of EMG measurements during sprint cycling may depend on the sprint cycling test undertaken (isovelocity or isoinertial accelerating), the reference tasks used for normalisation (isometric MVCs of a series of single muscle groups [ISO-SINGJT] or isometric cycling MVCs [ISO-CYC]), and the efficacy of the normalisation. This study aimed to compare the magnitude and between-session reliability of peak muscle activation (peak rmsEMG) during: isovelocity and isoinerital sprint cycling tests; ISO-SINGJT and ISO-CYC reference tasks; and absolute and normalised EMG during the sprint cycling tests. EMG amplitude was measured over six major muscle groups on both legs and all measurements were made over two sessions in a randomised counterbalanced design. Peak rmsEMG was assessed during both ISO-SINGJT and ISO-CYC MVCs and then during mechanical peak power output (PPO) during isovelocity (120 RPM) and isoinerital acceleration (0 to >150 RPM) sprint tests. Absolute peak rmsEMG and for the sprint tests normalised EMG values were determined, and coefficient of variation and intra-class correlation coefficients used to assess reliability. Peak rmsEMG at PPO during both sprint cycling tests was similar for the six muscle groups measured. Peak rmsEMG was higher during ISO-SINGJT than ISO-CYC for for 3 of the 6 muscle groups, but all muscle groups exhibited similar reliability for both reference tasks. Neither reference task improved the between-session reliability for either sprint test. This data highlights reservations in the use of isometric reference tasks to ascertain changes in peak muscle activation over time in during sprint cycling assessments. [ABSTRACT FROM AUTHOR]

Body position is known to alter power production and affect cycling performance. The aim of this study was to compare mechanical power output in two riding positions, and to calculate the effects on critical power (CP) and W′ estimates. Seven trained cyclists completed three peak power output efforts and three fixed-duration trial (3-, 5- and 12-min) riding with their hands on the brake lever hoods (BLH), or in a time trial position (TTP). A repeated-measures analysis of variance showed that mean power output during the 5-min trial was significantly different between BLH and TTP positions, resulting in a significantly lower estimate of CP, but not W′, for the TTP trial. In addition, TTP decreased the performance during each trial and increased the percentage difference between BLH and TTP with greater trial duration. There were no differences in pedal cadence or heart rate during the 3-min trial; however, TTP results for the 12-min trial showed a significant fall in pedal cadence and a significant rise in heart rate. The findings suggest that cycling position affects power output and influences consequent CP values. Therefore, cyclists and coaches should consider the cycling position used when calculating CP. [ABSTRACT FROM AUTHOR]

From a cycling paradigm, little has been done to understand the relationships between maximal isometric strength of different single joint lower body muscle groups and their relation with, and ability to predict PPO and how they compare to an isometric cycling specific task. The aim of this study was to establish relationships between maximal voluntary torque production from isometric single-joint and cycling specific tasks and assess their ability to predict PPO. Twenty male trained cyclists participated in this study. Peak torque was measured by performing maximum voluntary contractions (MVC) of knee extensors, knee flexors, dorsi flexors and hip extensors whilst instrumented cranks measured isometric peak torque from MVC when participants were in their cycling specific position (ISOCYC). A stepwise regression showed that peak torque of the knee extensors was the only significant predictor of PPO when using SJD and accounted for 47% of the variance. However, when compared to ISOCYC, the only significant predictor of PPO was ISOCYC, which accounted for 77% of the variance. This suggests that peak torque of the knee extensors was the best single-joint predictor of PPO in sprint cycling. Furthermore, a stronger prediction can be made from a task specific isometric task. [ABSTRACT FROM AUTHOR]