Search

This paper investigates the influence of stator/rotor pole number combinations and permanent magnet (PM) numbers on electromagnetic performance of consequent-pole hybrid excited flux reversal machines (CP-HEFRMs), which have different numbers of PM poles and iron poles and concentrated AC and DC windings on the stator and a salient pole rotor. PMs in the slots of one stator pole are magnetized radially in the same direction, while opposite on adjacent stator poles. Magnetic field paths of DC, PM, and hybrid excitations are investigated. The phenomenon of flux cancellation, i.e., PM and DC MMFs in CP-HEFRMs are of opposite polarities in the flux-enhancing operating mode, is revealed and verified, for the first time, as the key feature that makes CP-HEFRMs different from other hybrid excited machines. Consequently, the saturation in stator pole and yoke can be mitigated and hence the overload capability of DC excitation is enhanced, which is verified by finite element analysis (FEA). Global optimizations are utilized to obtain the optimal rotor and stator pole number combinations and PM numbers for each stator pole. Torque, torque ripple, inductance, unbalanced magnetic force, and flux regulation capability are compared for different PM numbers and rotor pole numbers. Comparisons are made on consequent-pole and non-consequent-pole topologies in terms of torque capacity, flux regulation capability, and PM consumption to further illustrate the advantages of consequent-pole topology. A prototype machine is built and tested to validate the analyses. [ABSTRACT FROM AUTHOR]

In this article, a new dual-permanent magnet spoke-type flux-reversal machine (dual-PM SFRM) for direct-drive applications is proposed. Tangentially magnetized permanent magnets (PMs) sandwiched with iron poles are set in stator slots. To increase the torque density within the geometric restrictions, PMs are introduced in the rotor as well and magnetized radially to form a consequent-pole rotor. Global optimizations are conducted and comparisons are made on torque, torque ripple, and torque/PM volume with the existing single-PM SFRM. It is found that the proposed dual-PM SFRM can produce 22.6% larger torque with an optimal PM volume and a 17.5% larger torque with the same PM volume compared with the single-PM counterpart. Moreover, major magnetic field space harmonics are derived analytically and verified by finite-element analysis (FEA) and the torque components produced by the working harmonics are calculated and compared in terms of different stator/rotor pole number combinations. Comparisons are made on back electromotive force, cogging torque, torque performance, and efficiency between dual-PM SFRM and conventional flux-reversal machine. The influence of different stator configurations, i.e., the slot opening, the iron bridge, and the unequal tooth, on torque performance in the proposed dual-PM SFRM has been studied and highlighted. A prototype has been built and tested to validate the FEA calculations. [ABSTRACT FROM AUTHOR]

This article proposes and investigates two asymmetric consequent-pole hybrid excited flux reversal machine (AS-CP-HEFRM) topologies, which have same numbers of iron poles and permanent magnets (PMs) with concentrated ac and dc windings on each stator pole and a salient pole rotor. If PM number on one stator pole is larger than 1, PMs are magnetized radially in the same direction on one stator pole, while opposite on adjacent stator poles. The phenomenon of the phase shift between the flux linkages of dc and PM excitations in the AS-CP-HEFRMs is revealed for the first time, which will weaken the regulation of dc excitation field to PM produced field. The elimination condition of the phase shift is derived and verified by finite-element analysis in this article, which can be considered as design guidelines in AS-CP-HEFRMs. Airgap magnetic field space harmonics of AS-CP-HEFRM are also investigated and verified by finite-element analyses. Meanwhile, the relationship between the rotor pole number and the stator pole arc (PM ratio) is derived and verified by global optimization based on genetic algorithm for maximum average torque. The influence of stator/rotor pole number combinations is also studied and compared in terms of torque, torque ripple, and flux regulation capability. The torque components produced by airgap magnetic field space harmonics are calculated and compared. A prototype has been built and tested to validate the finite element calculations. [ABSTRACT FROM AUTHOR]