Search

The present study aimed to produce a new, less toxic, and cost-effective polymer gel dosimeter using potassium salt of 2-acrylamido-2 methyl-propane sulfonic acid (AMPS) monomer. The new formulation was called PAKAG. The irradiation of PAKAG polymer gel dosimeter was performed using a 6 MV clinical linear accelerator, and its response was evaluated using magnetic resonance imaging. The obtained images were post-processed to produce related R 2 maps. Afterward, the Dose– R 2 calibration curves were obtained. Response dependence on the imaging temperature was examined. Furthermore, response stability over time was investigated. To investigate the radiological characteristics, the elemental composition, effective atomic number, electron density, and photon attenuation coefficient of PAKAG polymer gel dosimeter were calculated. A maximum sensitivity of 0.152 ± 0.007 with the goodness of fit of R 2 = 0.999 in a dynamic range of 0–6 Gy at 12 h post-irradiation time was found. Such as other polymer gel dosimeter, the response of PAKAG polymer gel dosimeter was dependent on post-irradiation time and imaging temperature. Finally, it was concluded that the PAKAG polymer gel dosimeter could be used as a less toxic and cost-effective polymer gel dosimeter. [ABSTRACT FROM AUTHOR]

Increasing the use of polymer gel dosimetry (PGD) in radiotherapy requires reducing its toxicity. The toxicity of the PGD components causes risks for the users as well as the environment. The aim of this study is to produce a new PGD called PAGBIT (Polymer, Amps ammonium salt, Gelatin, BIs, Thpc) based on the nontoxic monomer of 2-acrylamido-2-methylpropanesulfonic acid ammonium salt. Furthermore, this monomer is ecofriendly. The PAGBIT PGD was prepared in the laboratory in ambient conditions. PGDs were irradiated using a clinical accelerator with a dose range of 0–10 Gy. The incident photon energy and dose rate were 6-MV and 300 cGy/min, respectively. The irradiated PGDs were imaged using a 1.5T MRI scanner 9 times in a time range of 12–720 h post-irradiation. The maximum obtained sensitivity was 0.115 ± 0.005 Gy−1s−1 at 36 h post-irradiation time. The average sensitivity change as a function of post-irradiation time was 0.0017 Gy−1s−1h−1. However, the average sensitivity change as a function of scanning temperature was 0.0006 Gy−1s−1°C−1. Results showed that the differences of effective atomic number and electron density between PAGBIT and soft tissue were 2.3% and 0.3%, respectively. It was concluded that the PAGBIT is a low toxic, water equivalent PGD with noticeable temporal and temperature stabilities. • A new PGD with a nontoxic monomer was developed. • The new PGD was radiologically water equivalent. • The new PGD showed good stability during Post-irradiation Times. • The new PGD showed stability by Temperature During Scanning variation. [ABSTRACT FROM AUTHOR]

Despite many advantages of polymer gel dosimeters, their clinical use is only not realized now. Toxicity of polymer gel dosimeters can be considered as one of their main limitations for use in routine clinical applications. In the current study, a new polymer gel dosimeter is introduced with negligible toxicity. For this purpose, 2-Acrylamido-2-Methy-1-PropaneSulfonic acid (AMPS) sodium salt monomer was replaced instead of acrylamide monomer used in PAGAT gel dosimeter by using %6 T and %50 C to the gel formula and the new formulation is called PASSAG (Poly AMPS Sodium Salt and Gelatin) polymer gel dosimeter. The irradiation of gel dosimeters was carried out using a Co-60 therapy machine. MRI technique was used to quantify the dose responses of the PASSAG gel dosimeter. Then, the MRI responses ( R 2 ) of the gel dosimeter was analyzed at different dose values, post-irradiation times, and scanning temperatures. The results showed that the new gel formulation has a negligible toxicity and it is also eco-friendly. In addition, carcinogenicity and genetic toxicity tests are negative for the monomer used in PASSAG. The radiological properties of PASSAG gel dosimeter showed that this substance can be considered as a soft tissue/water equivalent material. Furthermore, dosimetric evaluation of the new polymer gel dosimeter revealed an excellent linear R 2 -dose response in the evaluated dose range (0–15 Gy). The R 2 -dose sensitivity and dose resolution of PASSAG gel dosimeter were 0.081 s −1 Gy −1 (in 0–15 Gy dose range) and 1 Gy (in 0–10 Gy dose range), respectively. Moreover, it was shown that the R 2 -dose sensitivity and dose resolution of the new gel dosimeter improves over time after irradiation. It was also found that the R 2 response of the PASSAG gel dosimeter has less dependency to the 18, 20, and 24 °C scanning temperature in comparison to that of room temperature (22 °C). [ABSTRACT FROM AUTHOR]