Search

International audience; Nanoparticles (NPs) are widely used in food, and analysis of their potential gastrointestinal toxicity is necessary. The present study was designed to determine the effects of silica dioxide (SiO2), titanium dioxide (TiO2), and zinc oxide (ZnO) NPs on cultured THP-1 monocyte-derived macrophages and human epithelial colorectal adenocarcinoma (Caco-2) cells. Exposure to ZnO NPs for 24 h increased the production of redox response species (ROS) and reduced cell viability in a dose-dependent manner in THP-1 macrophages and Caco-2 cells. Although TiO2 and SiO2 NPs induced oxidative stress, they showed no apparent cytotoxicity against both cell types. The effects of functionalized SiO2 NPs on undifferentiated and differentiated Caco-2 cells were investigated using fluorescently labeled SiO2 NPs with neutral, positive, or negative surface charge. Exposure of both types of cells to the three kinds of SiO2 NPs significantly increased their interaction in a dose-dependent manner. The largest interaction with both types of cells was noted with exposure to more negatively surface-charged SiO2 NPs. Exposure to either positively or negatively, but not neutrally, surface-charged SiO2 NPs increased NO levels in differentiated Caco-2 cells. Exposure of differentiated Caco-2 cells to positively or negatively surface-charged SiO2 NPs also upregulated interleukin-8 expression. We conclude that functionalized surface-charged SiO2 NPs can induce pro-inflammatory responses but are noncytotoxic.

Hazard studies for nanomaterials (NMs) commonly assess whether they activate an inflammatory response. Such assessments often rely on rodents, but alternative models are needed to support the implementation of the 3Rs principles. Zebrafish (Danio rerio) offer a viable alternative for screening NM toxicity by investigating inflammatory responses. Here, we used non-protected life stages of transgenic zebrafish (Tg(mpx:GFP)i114) with fluorescently-labeled neutrophils to assess inflammatory responses to silver (Ag) and zinc oxide (ZnO) NMs using two approaches. Zebrafish were exposed to NMs via water following a tail fin injury, or NMs were microinjected into the otic vesicle. Zebrafish were exposed to NMs at 3 days post-fertilization (dpf) and neutrophil accumulation at the injury or injection site was quantified at 0, 4, 6, 8, 24, and 48 h post-exposure. Zebrafish larvae were also exposed to fMLF, LTB4, CXCL-8, C5a, and LPS to identify a suitable positive control for inflammation induction. Aqueous exposure to Ag and ZnO NMs stimulated an enhanced and sustained neutrophilic inflammatory response in injured zebrafish larvae, with a greater response observed for Ag NMs. Following microinjection, Ag NMs stimulated a time-dependent neutrophil accumulation in the otic vesicle which peaked at 48 h. LTB4 was identified as a positive control for studies investigating inflammatory responses in injured zebrafish following aqueous exposure, and CXCL-8 for microinjection studies that assess responses in the otic vesicle. Our findings support the use of transgenic zebrafish to rapidly screen the pro-inflammatory effects of NMs, with potential for wider application in assessing chemical safety (e.g. pharmaceuticals).

Assessment of nanomaterial (NM) induced inflammatory responses has largely relied on rodent testing via measurement of leukocyte accumulation in target organs. Despite observations that NMs activate neutrophil driven inflammatory responses in vivo, a limited number of studies have investigated neutrophil responses to NMs in vitro. We compared responses between the human neutrophil-like HL-60 cell line and human primary neutrophils following exposure to silver (Ag), zinc oxide (ZnO), copper oxide (CuO) and titanium dioxide (TiO2) NMs. NM cytotoxicity and neutrophil activation were assessed by measuring cellular metabolic activity, cytokine production, respiratory burst, and release of neutrophil extracellular traps. We observed a similar pattern of response between HL-60 cells and primary neutrophils, however we report that some neutrophil functions are compromised in the cell line. Ag NMs were consistently observed to stimulate neutrophil activation, with CuO NMs inducing similar though weaker responses. TiO2 NMs did not induce a neutrophil response in either cell type. Interestingly, ZnO NMs readily induced activation of HL-60 cells but did not appear to activate primary cells. Our findings are relevant to the development of a tiered testing strategy for NM hazard assessment which promotes the use of non-rodent models. Whilst we acknowledge that HL-60 cells may not be a perfect substitute for primary cells and require further investigation regarding their ability to predict neutrophil activation, we recommend their use for initial screening of NM-induced inflammation. Primary human neutrophils can then be used for more focused assessments of neutrophil activation before progressing to in vivo models where necessary.

International audience; The convergence of nanotechnology and biotechnology has led to substantial advancements in nano-biomaterials (NBMs) used in medical devices (MD) and advanced therapy medicinal products (ATMP). However, there are concerns that applications of NBMs for medical diagnostics, therapeutics and regenerative medicine could also pose health and/or environmental risks since the current understanding of their safety is incomplete. A scientific strategy is therefore needed to assess all risks emerging along the life cycles of these products. To address this need, an overarching risk management framework (RMF) for NBMs used in MD and ATMP is presented in this paper, as a result of a collaborative effort of a team of experts within the EU Project BIORIMA and with relevant inputs from external stakeholders. The framework, in line with current regulatory requirements, is designed according to state-of-the-art approaches to risk assessment and management of both nanomaterials and biomaterials. The collection/generation of data for NBMs safety assessment is based on innovative integrated approaches to testing and assessment (IATA). The framework can support stakeholders (e.g., manufacturers, regulators, consultants) in systematically assessing not only patient safety but also occupational (including healthcare workers) and environmental risks along the life cycle of MD and ATMP. The outputs of the framework enable the user to identify suitable safe(r)-by-design alternatives and/or risk management measures and to compare the risks of NBMs to their (clinical) benefits, based on efficacy, quality and cost criteria, in order to inform robust risk management decision-making.

Assessing the safety of engineered nanomaterials (NMs) is paramount to the responsible and sustainable development of nanotechnology, which provides huge societal benefits. Currently, there is no evidence that engineered NMs cause detrimental health effects in humans. However, investigation of NM toxicity using in vivo, in vitro, in chemico, and in silico models has demonstrated that some NMs stimulate oxidative stress and inflammation, which may lead to adverse health effects. Accordingly, investigation of these responses currently dominates NM safety assessments. There is a need to reduce reliance on rodent testing in nanotoxicology for ethical, financial and legislative reasons, and due to evidence that rodent models do not always predict the human response. We advocate that in vitro models and zebrafish embryos should have greater prominence in screening for NM safety, to better align nanotoxicology with the 3Rs principles. Zebrafish are accepted for use by regulatory agencies in chemical safety assessments (e.g. developmental biology) and there is growing acceptance of their use in biomedical research, providing strong foundations for their use in nanotoxicology. We suggest that investigation of the response of phagocytic cells (e.g. neutrophils, macrophages) in vitro should also form a key part of NM safety assessments, due to their prominent role in the first line of defense. The development of a tiered testing strategy for NM hazard assessment that promotes the more widespread adoption of non-rodent, alternative models and focuses on investigation of inflammation and oxidative stress could make nanotoxicology testing more ethical, relevant, and cost and time efficient.

Biomathematical modeling quantitatively describes the disposition of metal nanoparticles in lungs and other organs of rats. In a preliminary model, adjustable parameters were calibrated to each of three data sets using a deterministic approach, with optimal values varying among the different data sets. In the current effort, Bayesian population analysis using Markov chain Monte Carlo (MCMC) simulation was used to recalibrate the model while improving assessments of parameter variability and uncertainty. The previously-developed model structure and some physiological parameter values were modified to improve physiological realism. The data from one of the three previously-identified studies and from two other studies were used for model calibration. The data from the one study that adequately characterized mass balance were used to generate parameter distributions. When data from a second study of the same nanomaterial (iridium) were added, the level of agreement was still acceptable. Addition of another data set (for silver nanoparticles) led to substantially lower precision in parameter estimates and large discrepancies between the model predictions and experimental data for silver nanoparticles. Additional toxicokinetic data are needed to further evaluate the model structure and performance and to reduce uncertainty in the kinetic processes governing in vivo disposition of metal nanoparticles.

A first European Conference on Computational Nanotoxicology, CompNanoTox, was held in November 2015 in Benahavis, Spain with the objectives to disseminate and integrate results from the European modeling and database projects (NanoPUZZLES, ModENPTox, PreNanoTox, MembraneNanoPart, MODERN, eNanoMapper and EU COST TD1204 MODENA) as well as to create synergies within the European NanoSafety Cluster. This conference was supported by the COST Action TD1204 MODENA on developing computational methods for toxicological risk assessment of engineered nanoparticles and provided a unique opportunity for cross fertilization among complementary disciplines. The efforts to develop and validate computational models crucially depend on high quality experimental data and relevant assays which will be the basis to identify relevant descriptors. The ambitious overarching goal of this conference was to promote predictive nanotoxicology, which can only be achieved by a close collaboration between the computational scientists (e.g. database experts, modeling experts for structure, (eco) toxicological effects, performance and interaction of nanomaterials) and experimentalists from different areas (in particular toxicologists, biologists, chemists and material scientists, among others). The main outcome and new perspectives of this conference are summarized here.

International audience; Nanoparticles (NP) have a tendency to agglomerate after dispersion in physiological media, which can be prevented by the addition of serum. This may however result in modification of the toxic potential of particles due to the formation of protein corona. Our study aimed to analyze the role of serum that is added to improve the dispersion of 10 nm TiO2 NPs on in vitro and in vivo effects following the exposure via the respiratory route. We characterized NP size, surface charge, sedimentation rate, the presence of protein corona and the oxidant-generating capacity after NP dispersion in the presence/absence of serum. The effect of serum on NP internalization, cytotoxicity and pro-inflammatory responses was assessed in a human pulmonary cell line, NCI-H292. Serum in the dispersion medium led to a slower sedimentation, but an enhanced cellular uptake of TiO2 NPs. Despite this greater uptake, the pro-inflammatory response in NCI-H292 cells was lower after serum supplementation (used either as a dispersant or as a cell culture additive), which may be due to a reduced intrinsic oxidative potential of TiO2 NPs. Interestingly, serum could be added 2 h after the NP treatment without affecting the pro-inflammatory response. We also determined the acute pulmonary and hepatic toxicity in vivo 24 h after intratracheal instillation of TiO2 NPs in C57BL/6N mice. The use of serum resulted in an underestimation of the local acute inflammatory response in the lung, while a systemic response on glutathione reduction remained unaffected. In conclusion, serum as a dispersion agent for TiO2 NPs can lead to an underestimation of the acute pro-inflammatory response in vitro and in vivo. To avoid potential unwanted effects of dispersants and medium components, we recommend that the protocol of NM preparation should be thoroughly tested, and reflect as close as possible realistic exposure conditions.

Antibiotic resistance is a serious problem. Nanotechnology offers enormous potential in medicine, yet there is limited knowledge regarding the toxicity of nanoparticles (NP) for mycobacterial species that cause serious human diseases (e.g. tuberculosis (TB) and leprosy). Mycobacterial diseases are a major global health problem; TB caused by Mycobacterium tuberculosis (Mtb) kills up to 2 million people annually and there are over 200 000 leprosy cases each year caused by Mycobacterium leprae (M. leprae). Few drugs are effective against these mycobacteria and increasing antibiotic resistance exacerbates the problem. As such, alternative therapies are urgently needed but most current assays used to assess the effectiveness of therapeutics against mycobacteria are slow and expensive. This study aimed to develop a rapid, low-cost assay which can be used for screening the antimicrobial properties of compounds against pathogenic mycobacteria and to assess the toxicity of three NP (silver [Ag], copper oxide [Cu(II)O], and zinc oxide [ZnO]) against a green fluorescent protein reporter strain of Mycobacterium avium subspecies paratuberculosis, a slow growing, pathogenic mycobacterial species causing paratuberculosis in ruminants. Fluorescence was used to monitor mycobacterial growth over time, with NP concentrations of 6.25–100 μg/mL tested for up to 7 days, and a method of data analysis was designed to permit comparison between results. Mycobacterial sensitivity to the NP was found to be NP composition specific and toxicity could be ranked in the following order: Ag > Cu(II)O > ZnO.

PARTICLE_RISK was one of the first multidisciplinary projects funded by the European Commission's Framework Programme that was responsible for evaluating the implications of nanomaterial (NM) exposure on human health. This project was the basis for this review which identifies the challenges that exist within the assessment of NM risk. We have retrospectively reflected on the findings of completed nanotoxicology studies to consider what progress and advances have been made within the risk assessment of NMs, as well as discussing the direction that nanotoxicology research is taking and identifying the limitations and failings of existing research. We have reflected on what commonly encountered challenges exist and explored how these issues may be resolved. In particular, the following is discussed (i) NM selection (ii) NM physico-chemical characterisation; (iii) NM dispersion; (iv) selection of relevant doses and concentrations; (v) identification of relevant models, target sites and endpoints; (vi) development of alternatives to animal testing; and (vii) NM risk assessment. These knowledge gaps are relatively well recognised by the scientific community and recommendations as to how they may be overcome in the future are provided. It is hoped that this will help develop better defined hypothesis driven research in the future that will enable comprehensive risk assessments to be conducted for NMs. Importantly, the nanotoxicology community has responded and adapted to advances in knowledge over recent years to improve the approaches used to assess NM hazard, exposure and risk. It is vital to learn from existing information provided by ongoing or completed studies to avoid unnecessary duplication of effort, and to offer guidance on aspects of the experimental design that should be carefully considered prior to the start of a new study.

In 1987 the International Agency for Research on Cancer (IARC) classified crystalline silica (CS) as a probable carcinogen and in 1997 reclassified it as a Group 1 carcinogen, i.e., that there was sufficient evidence for carcinogenicity in experimental animals and sufficient evidence for carcinogenicity in humans. The Working Group noted that "carcinogenicity in humans was not detected in all industrial circumstances studied, carcinogenicity may be dependent on inherent characteristics of the crystalline silica or on external factors affecting its biological activity or distribution of its polymorphs." This unusual statement that the physicochemical form of the CS influences its carcinogenicity is well understood at the toxicological level and arises as a consequence of the fact that CS activity depends on the reactivity of the CS surface, which can be blocked by a number of agents. We reviewed the literature on CS genotoxicity that has been published since the 1997 monograph, with special reference to the mechanism of CS genotoxicity. The mechanism of CS genotoxicity can be primary, a result of direct interaction of CS with target cells, or indirect, as a consequence of inflammation elicited by quartz, where the inflammatory cell-derived oxidants cause the genotoxicity. The review revealed a number of papers supporting the hypothesis that the CS genotoxic and inflammatory hazard is a variable one. In an attempt to attain a quantitative basis for the potential mechanism, we carried out analysis of published data and noted a 5-fold greater dose required to reach a threshold for genotoxic effects than for proinflammatory effects in the same cell line in vitro. When we related the calculated threshold dose at the proximal alveolar region for inflammation in a published study with the threshold dose for genotoxicity in vitro, we noted that a 60-120-fold greater dose was required for direct genotoxic effects in vitro. These data strongly suggests that inflammation is the driving force for genotoxicity and that primary genotoxicity of deposited CS would play a role only at very high, possibly implausible, exposures and deposited doses. Although based on rat studies and in vitro studies, and therefore with caveats, the analysis supports the hypothesis that the mechanism of CS genotoxicity is via inflammation-driven secondary genotoxicity. This may have implications for setting of the CS standard in workplaces. During the writing of this review (in May 2009), IARC undertook a review of carcinogenic substances, including CS. The Working Group met to reassess 10 separate agents including CS. This was not a normal monograph working group published as a large single monograph, but was published as a two-page report. This review group reaffirmed the carcinogenicity of "silica dust, crystalline in the form of quartz or cristobalite" as a Group 1 agent, with the lung as the sole tumor site. Of special relevance to the present review is that the cited "established mechanism events" for CS are restricted to the words "impaired particle clearance leading to macrophage activation and persistent inflammation." The lack of mention of direct genotoxicity is in line with the conclusions reached in the present review.

Fullerenes have gained considerable attention due to their anti-oxidant and radical scavenging properties. Their current applications include targeted drug delivery, energy application, polymer modifications and cosmetic products. The production of fullerenes and their use in consumer products is expected to increase in future. This study aims to investigate the feasibility and challenges associated with conducting a human health risk assessment for fullerenes based on the open literature, utilising an approach similar to that of a classical regulatory risk assessment. Available data relates to different types of fullerenes (with varying size, surface chemistry, solubility, aggregation/agglomeration) and care should therefore be taken when drawing general conclusions across the parameters. Pristine fullerenes have shown low toxicity and there is probably no risks expected for humans exposed to fullerenes in the workplace under good hygiene conditions. The main concern for consumers is exposure via direct dermal application of fullerenes present in cosmetics. Available studies do not indicate a short term risk from the tested fullerene types, however no extrapolation to all fullerene types and to chronic exposure can be made. In conclusion, the current dataset on fullerenes in relation to both, human exposure and hazard is limited and does not allow reaching any definite conclusions suitable for regulatory decision making. Main future work should focus on generating occupational and consumer exposure data, as well as suitable data on toxicokinetics and potential toxic effects following repeated inhalation and dermal exposure allowing to determine a NOAEL. It seems also relevant to clarify whether certain fullerene types may potentially induce genotoxic and/or carcinogenic effects via physiologically relevant routes.

Carbon nanotubes (CNTs) possess many unique electronic and mechanical properties and are thus interesting for numerous novel industrial and biomedical applications. As the level of production and use of these materials increases, so too does the potential risk to human health. This study aims to investigate the feasibility and challenges associated with conducting a human health risk assessment for carbon nanotubes based on the open literature, utilising an approach similar to that of a classical regulatory risk assessment. Results indicate that the main risks for humans arise from chronic occupational inhalation, especially during activities involving high CNT release and uncontrolled exposure. It is not yet possible to draw definitive conclusions with regards the potential risk for long, straight multi-walled carbon nanotubes to pose a similar risk as asbestos by inducing mesothelioma. The genotoxic potential of CNTs is currently inconclusive and could be either primary or secondary. Possible systemic effects of CNTs would be either dependent on absorption and distribution of CNTs to sensitive organs or could be induced through the release of inflammatory mediators. In conclusion, gaps in the data set in relation to both exposure and hazard do not allow any definite conclusions suitable for regulatory decision-making. In order to enable a full human health risk assessment, future work should focus on the generation of reliable occupational, environmental and consumer exposure data. Data on toxicokinetics and studies investigating effects of chronic exposure under conditions relevant for human exposure should also be prioritised.

There have been several studies on the maternal administration of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and effects in the reproductive tract of male offspring, subsequent to risk assessments undertaken in 2001. This review compares the methodology and results to examine key methodological features, and consistency in reported outcomes. Maternal dosing at >0.8 microg TCDD/kg causes lethality and weight loss, and it is difficult to distinguish between direct and indirect effects of TCDD at these dose levels. Statistically significant effects of maternal doses of

Nanoparticles (NPs) are being used within diverse applications such as medicines, clothing, cosmetics and food. In order to promote the safe development of such nanotechnologies it is essential to assess the potential adverse health consequences associated with human exposure. The liver is recognised as a target site for NP toxicity, due to NP accumulation within this organ subsequent to injection, inhalation or instillation. The uptake of fluorescent polystyrene carboxylated particles (20 nm or 200 nm diameter) by hepatocytes was determined using confocal microscopy; with cells imaged "live" during particle exposure or after exposure within fixed cells. Comparisons between the uptake of polystyrene particles by primary rat hepatocytes, and human hepatocyte cell lines (C3A and HepG2) were made. Uptake of particles by hepatocytes was size, time, and serum dependent. Specifically, the uptake of 200 nm particles was limited, but 20 nm NPs were internalised by all cell types from 10 min onwards. At 10 min, 20 nm NP fluorescence co-localised with the tubulin cytoskeleton staining; after 30 min NP fluorescence compartmentalised into structures located within and/or between cells. The fate of internalised NPs was considered and they were not contained within early endosomes or lysosomes, but within mitochondria of cell lines. NPs accumulated within bile canaliculi to a limited extent, which suggests that NPs can be eliminated within bile. This is in keeping with the finding that gold NPs were eliminated in bile following intravenous injection into rats. The findings were, in the main, comparable between primary rat hepatocytes and the different human hepatocyte cell lines.

The development of reference materials for toxicology and metrology is a critical component in establishing testing strategies and methods for human health hazard assessment of nanoparticles. A UK-based project (REFNANO) employed a workshop-based process to identify a priority list of candidate reference materials to support the measurement, toxicology and risk assessment of engineered nanoparticles. Consensus was reached amongst leading UK experts in toxicology, metrology and risk assessment from academia, government and industry on: (i) A rationale for the selection and development of priority reference/test materials; (ii) a priority listing of reference/test materials; (iii) the quantities of materials needed and the matrix in which they are present; and (iv) a recommended set of characteristics to be determined for the reference/test materials. The project also identified a series of actions for the development and promulgation of reference materials for nanoparticles for further consideration, both ...

Envirox is a scientifically and commercially proven diesel fuel combustion catalyst based on nanoparticulate cerium oxide and has been demonstrated to reduce fuel consumption, greenhouse gas emissions (CO(2)), and particulate emissions when added to diesel at levels of 5 mg/L. Studies have confirmed the adverse effects of particulates on respiratory and cardiac health, and while the use of Envirox contributes to a reduction in the particulate content in the air, it is necessary to demonstrate that the addition of Envirox does not alter the intrinsic toxicity of particles emitted in the exhaust. The purpose of this study was to evaluate the safety in use of Envirox by addressing the classical risk paradigm. Hazard assessment has been addressed by examining a range of in vitro cell and cell-free endpoints to assess the toxicity of cerium oxide nanoparticles as well as particulates emitted from engines using Envirox. Exposure assessment has taken data from modeling studies and from airborne monitoring sites in London and Newcastle adjacent to routes where vehicles using Envirox passed. Data have demonstrated that for the exposure levels measured, the estimated internal dose for a referential human in a chronic exposure situation is much lower than the no-observed-effect level (NOEL) in the in vitro toxicity studies. Exposure to nano-size cerium oxide as a result of the addition of Envirox to diesel fuel at the current levels of exposure in ambient air is therefore unlikely to lead to pulmonary oxidative stress and inflammation, which are the precursors for respiratory and cardiac health problems.

Different particle types cause excessive lung inflammation that is thought to play a role in the various types of pathology they produce. Recently attention has been focused on nanoparticles due to their presence in environmental particulate air pollution, their use and exposure in occupational settings, and their potential use in nanotechnology and novel therapeutics. We have shown previously that the surface area metric drives the overload response. We have instilled a number of low-toxicity dusts of various particle sizes and assessed neutrophil influx into the lung at 18-24 h postinstillation. The extent of inflammation was demonstrated as being a function not of the mass dose instilled but interestingly of the surface area dose instilled. Since low-toxicity nanoparticles present a "special" case of high surface area, they are relatively inflammogenic. We tested whether we could use this approach to model the reactivity of highly toxic dusts. Rats were instilled with either DQ12 quartz or aluminum lactate-treated DQ12 and, as anticipated, the high specific surface toxicity of DQ12 meant that it was much more inflammogenic (63 times more) than the surface area alone would have predicted. By contrast, aluminum lactate-treated DQ12 fell into the line of "low-toxicity" dusts. In addition, as an in vitro testing alternative to that of in vivo testing, interleukin (IL)-8 production in A549 cells exposed to the panel of various particles clearly demonstrated the ability to also identify a relationship between surface area dose and reactivity. These approaches present the possibility of modelling potential toxicity of nanoparticles and nuisance dusts based on the inflammatory response of a given instilled surface area dose.

Rodent studies are frequently used to assess risk in humans, yet it is not known whether the overloading of lung clearance, as observed in rodents, occurs in humans, or whether overloading is related to particle-related lung diseases in humans. The objective of this study is to develop a biologically based mathematical model to describe the retention and clearance of respirable coal mine dust in the lungs of humans. A human dosimetric lung model was developed that includes alveolar, interstitial, and hilar lymph-node compartments. The model describes the particle mass transfer kinetics among these compartments and clearance via the tracheobronchi. The model was calibrated using data in U.S. coal miners, including individual working lifetime exposure histories and lung and lymph-node particle burdens. The model fit to the human data was evaluated using a least-squared error criterion. The end-of-life lung dust burdens of all coal miners in this study were substantially greater than expected from a simple, linear first-order model with effective clearance, yet their lung and lymph-node dust burdens were lower than expected from the rodent-based overload model, particularly at higher exposures. The best fitting model included a predominant first-order interstitial compartment, in which the particles are essentially sequestered (with very slow clearance to the lymph nodes), and a first-order alveolar clearance compartment with either no dose-dependent decline (overloading) or much less than expected from the rodent studies. These findings are consistent with the findings from magnetopneumography studies of clearance in retired miners and from studies of particle retention patterns in rodents and primates. This human dosimetric lung model is useful for evaluating the kinetic differences of particle retention in humans and rodents, and for evaluating the lung closes in humans given different exposure scenarios.

Nanogenotoxicity is a crucial endpoint in safety testing of nanomaterials as it addresses potential mutagenicity, which has implications for risks of both genetic disease and carcinogenesis. Within the NanoTEST project, we investigated the genotoxic potential of well-characterised nanoparticles (NPs): titanium dioxide (TiO2) NPs of nominal size 20 nm, iron oxide (8 nm) both uncoated (U-Fe3O4) and oleic acid coated (OC-Fe3O4), rhodamine-labelled amorphous silica 25 (Fl-25 SiO2) and 50 nm (Fl-50 SiO) and polylactic glycolic acid polyethylene oxide polymeric NPs - as well as Endorem® as a negative control for detection of strand breaks and oxidised DNA lesions with the alkaline comet assay. Using primary cells and cell lines derived from blood (human lymphocytes and lymphoblastoid TK6 cells), vascular/central nervous system (human endothelial human cerebral endothelial cells), liver (rat hepatocytes and Kupffer cells), kidney (monkey Cos-1 and human HEK293 cells), lung (human bronchial 16HBE14o cells) and placenta (human BeWo b30), we were interested in which in vitro cell model is sufficient to detect positive (genotoxic) and negative (non-genotoxic) responses. All in vitro studies were harmonized, i.e. NPs from the same batch, and identical dispersion protocols (for TiO2 NPs, two dispersions were used), exposure time, concentration range, culture conditions and time-courses were used. The results from the statistical evaluation show that OC-Fe3O4 and TiO2 NPs are genotoxic in the experimental conditions used. When all NPs were included in the analysis, no differences were seen among cell lines - demonstrating the usefulness of the assay in all cells to identify genotoxic and non-genotoxic NPs. The TK6 cells, human lymphocytes, BeWo b30 and kidney cells seem to be the most reliable for detecting a dose-response.

There is a huge effort underway in nanotechnology with the development of nanomaterials which have better properties and are more effective than their parent bulk materials, and also are safe to us...

Nanomaterials (NMs) display many unique and useful physico-chemical properties. However, reliable approaches are needed for risk assessment of NMs. The present study was performed in the FP7-MARINA project, with the objective to identify and evaluate in vitro test methods for toxicity assessment in order to facilitate the development of an intelligent testing strategy (ITS). Six representative oxide NMs provided by the EC-JRC Nanomaterials Repository were tested in nine laboratories. The in vitro toxicity of NMs was evaluated in 12 cellular models representing 6 different target organs/systems (immune system, respiratory system, gastrointestinal system, reproductive organs, kidney and embryonic tissues). The toxicity assessment was conducted using 10 different assays for cytotoxicity, embryotoxicity, epithelial integrity, cytokine secretion and oxidative stress. Thorough physico-chemical characterization was performed for all tested NMs. Commercially relevant NMs with different physico-chemical properties were selected: two TiO2 NMs with different surface chemistry – hydrophilic (NM-103) and hydrophobic (NM-104), two forms of ZnO – uncoated (NM-110) and coated with triethoxycapryl silane (NM-111) and two SiO2 NMs produced by two different manufacturing techniques – precipitated (NM-200) and pyrogenic (NM-203). Cell specific toxicity effects of all NMs were observed; macrophages were the most sensitive cell type after short-term exposures (24-72h) (ZnO>SiO2>TiO2). Longer term exposure (7 to 21 days) significantly affected the cell barrier integrity in the presence of ZnO, but not TiO2 and SiO2, while the embryonic stem cell test (EST) classified the TiO2 NMs as potentially ‘weak-embryotoxic’ and ZnO and SiO2 NMs as ‘non-embryotoxic’. A hazard ranking could be established for the representative NMs tested (ZnO NM-110 > ZnO NM-111 > SiO2 NM-203 > SiO2 NM-200 > TiO2 NM-104 > TiO2 NM-103). This ranking was different in the case of embryonic tissues, for which TiO2 displayed higher toxicity compared with ZnO and SiO2. Importantly, the in vitro methodology applied could identify cell- and NM-specific responses, with a low variability observed between different test assays. Overall, this testing approach, based on a battery of cellular systems and test assays, complemented by an exhaustive physico-chemical characterization of NMs, could be deployed for the development of an ITS suitable for risk assessment of NMs. This study also provides a rich source of data for modeling of NM effects.

Carbon nanotubes (CNT) are an important new class of technological materials that have numerous novel and useful properties. The forecast increase in manufacture makes it likely that increasing human exposure will occur, and as a result, CNT are beginning to come under toxicological scrutiny. This review seeks to set out the toxicological paradigms applicable to the toxicity of inhaled CNT, building on the toxicological database on nanoparticles (NP) and fibers. Relevant workplace regulation regarding exposure is also considered in the light of our knowledge of CNT. CNT could have features of both NP and conventional fibers, and so the current paradigm for fiber toxicology, which is based on mineral fibers and synthetic vitreous fibers, is discussed. The NP toxicology paradigm is also discussed in relation to CNT. The available peer-reviewed literature suggests that CNT may have unusual toxicity properties. In particular, CNT seem to have a special ability to stimulate mesenchymal cell growth and to cause granuloma formation and fibrogenesis. In several studies, CNT have more adverse effects than the same mass of NP carbon and quartz, the latter a commonly used benchmark of particle toxicity. There is, however, no definitive inhalation study available that would avoid the potential for artifactual effects due to large mats and aggregates forming during instillation exposure procedures. Studies also show that CNT may exhibit some of their effects through oxidative stress and inflammation. CNT represent a group of particles that are growing in production and use, and therefore, research into their toxicology and safe use is warranted.

Risk assessment of occupational exposure to nanomaterials is needed. Human data are limited, but quantitative data are available from rodent studies. To use these data in risk assessment, a scientifically reasonable approach for extrapolating the rodent data to humans is required. One approach is allometric adjustment for species differences in the relationship between airborne exposure and internal dose. Another approach is lung dosimetry modeling, which provides a biologically-based, mechanistic method to extrapolate doses from animals to humans. However, current mass-based lung dosimetry models may not fully account for differences in the clearance and translocation of nanoparticles. In this article, key steps in quantitative risk assessment are illustrated, using dose-response data in rats chronically exposed to either fine or ultrafine titanium dioxide (TiO2), carbon black (CB), or diesel exhaust particulate (DEP). The rat-based estimates of the working lifetime airborne concentrations associated with 0.1% excess risk of lung cancer are approximately 0.07 to 0.3 mg/m 3 for ultrafine TiO2, CB, or DEP, and 0.7 to 1.3 mg/m 3 for fine TiO2. Comparison of observed versus model-predicted lung burdens in rats shows that the dosimetry models predict reasonably well the retained mass lung burdens of fine or ultrafine poorly soluble particles in rats exposed by chronic inhalation. Additional model validation is needed for nanoparticles of varying characteristics, as well as extension of these models to include particle translocation to organs beyond the lungs. Such analyses would provide improved prediction of nanoparticle dose for risk assessment.

Fibrous materials, exemplified by asbestos, that release respirable fibres are in common use and there is considerable knowledge regarding the toxicology of these common fibres. Newer materials or those that are under development, such as synthetic organic fibres and carbon nanotubes may have a different toxicology paradigms. The existing paradigm for silicate fibres suggests that respirable fibre types vary in their ability to cause lung disease and that this can be understood on the basis of the length of the fibres and their biopersistence in the lungs. Because fibres are regulated on a fibre number basis and the hazard is understood on the basis of the number of long fibres, in fibre testing the dose should always be expressed as fibre number, not mass and the length and diameter distribution need to be known. Short-term biological tests are likely to produce false positives in the case of long non-biopersistent fibres, because whilst they may have effects in vitro, they do not persist long enough in the lungs for sufficient dose to build up and produce effects in vivo. The biopersistence of fibres is therefore a key factor that needs to be known in order to interpret short-term tests that may claim to predict fibre pathogenicity.

(2002). INFLAMMATION CAUSED BY PARTICLES AND FIBERS. Inhalation Toxicology: Vol. 14, No. 1, pp. 5-27.

BACKGROUND:To assess the risk of all nanomaterials (NMs) on a case-by-case basis is challenging in terms of financial, ethical and time resources. Instead a more intelligent approach to knowledge gain and risk assessment is required.METHODS:A framework of future research priorities was developed from the accorded opinion of experts covering all major stake holder groups (government, industry, academia, funders and NGOs). It recognises and stresses the major topics of physicochemical characterisation, exposure identification, hazard identification and modelling approaches as key components of the current and future risk assessment of NMs.RESULTS:The framework for future research has been developed from the opinions of over 80 stakeholders, that describes the research priorities for effective development of an intelligent testing strategy (ITS) to allow risk evaluation of NMs. In this context, an ITS is a process that allows the risks of NMs to be assessed accurately, effectively and efficiently, thereby reducing the need to test NMs on a case-by-case basis.For each of the major topics of physicochemical characterisation, exposure identification, hazard identification and modelling, key-priority research areas are described via a series of stepping stones, or hexagon diagrams structured into a time perspective. Importantly, this framework is flexible, allowing individual stakeholders to identify where their own activities and expertise are positioned within the prioritisation pathway and furthermore to identify how they can effectively contribute and structure their work accordingly. In other words, the prioritisation hexagon diagrams provide a tool that individual stakeholders can adapt to meet their own particular needs and to deliver an ITS for NMs risk assessment. Such an approach would, over time, reduce the need for testing by increasing the reliability and sophistication of in silico approaches.The manuscript includes an appraisal of how this framework relates to the current risk assessment approaches and how future risk assessment could adapt to accommodate these new approaches. A full report is available in electronic format (pdf) at http://www.nano.hw.ac.uk/research-projects/itsnano.html.CONCLUSION:ITS-NANO has delivered a detailed, stakeholder driven and flexible research prioritisation (or strategy) tool, which identifies specific research needs, suggests connections between areas, and frames this in a time-perspective.

The objective of this study is to investigate the sources of variability and uncertainty in a previously developed human lung dosimetry model. That three-compartment model describes the retention and clearance kinetics of respirable particles in the gas-exchange region of the lungs. It was calibrated using exposure histories and lung dust burden data in U.S. coal miners. A multivariate parameter estimation and optimization method was developed for fitting the dosimetry model to these human data. Models with various assumptions about overloading of alveolar clearance and interstitialization (sequestration) of particles were evaluated. Variability in the estimated clearance rate coefficients was assessed empirically by fitting the model to groups' and to each miner's data. Distributions of lung and lymph node particle burdens were computed at working lifetime exposures, using the variability in the estimated individual clearance rate coefficients. These findings confirm those of the earlier analysis; i.e., the best-fitting exposure-dose model to these data has substantial interstitialization/sequestration of particles and no dose-dependent decline in alveolar clearance. Among miners with different characteristics for smoking, disease, and race, the group median estimated alveolar clearance rate coefficients varied by a factor of approximately 4. Adjustment for these group differences provided some improvement in the dosimetry model fit to all miners (up to 25% reduction in MSE), although unexplained interindividual differences made up the largest source of variability. The predicted mean lung and lymph node particle burdens at age 75 after exposure to respirable coal mine dust at 2 mg/m(2) for a 45-year working lifetime were 12 g (5th and 95th percentiles, 3.0-26 g) and 1.9 g (0.26-5.3), respectively. This study provides quantitative information on variability in particle retention and clearance kinetics in humans. It is useful for risk assessment by providing estimated lung dust burdens associated with occupational exposure to respirable particles.

Introduction: The use of human data to calibrate and validate a physiologically based pharmacokinetic (PBPK) model has the clear advantage of pertaining to the species of interest, namely humans. A challenge in using these data is their often sparse, heterogeneous nature, which may require special methods. Approaches for evaluating sources of variability and uncertainty in a human lung dosimetry model are described in this study. Methods: A multivariate optimization procedure was used to fit a dosimetry model to data of 131 U.S. coal miners. These data include workplace exposures and end-of-life particle burdens in the lungs and hilar lymph nodes. Uncertainty in model structure was investigated by fitting various model forms for particle clearance and sequestration of particles in the lung interstitium. A sensitivity analysis was performed to determine which model parameters had the most influence on model output. Distributions of clearance parameters were estimated by fitting the model to each individual's data, and this information was used to predict inter-individual differences in lung particle burdens at given exposures. The influence of smoking history, race and pulmonary fibrosis on the individual's estimated clearance parameters was also evaluated. Results: The model structure that provided the best fit to these coal miner data includes a first-order interstitialization process and no dose-dependent decline in alveolar clearance. The parameter that had the largest influence on model output is fractional deposition. Race and fibrosis severity category were statistically significant predictors of individual's estimated alveolar clearance rate coefficients (P

A biomathematical model was previously developed to describe the long-term clearance and retention of particles in the lungs of coal miners. The model structure was evaluated and parameters were estimated in two data sets, one from the United States and one from the United Kingdom. The three-compartment model structure consists of deposition of inhaled particles in the alveolar region, competing processes of either clearance from the alveolar region or translocation to the lung interstitial region, and very slow, irreversible sequestration of interstitialized material in the lung-associated lymph nodes. Point estimates of model parameter values were estimated separately for the two data sets. In the current effort, Bayesian population analysis using Markov chain Monte Carlo simulation was used to recalibrate the model while improving assessments of parameter variability and uncertainty. When model parameters were calibrated simultaneously to the two data sets, agreement between the derived parameters for the two groups was very good, and the central tendency values were similar to those derived from the deterministic approach. These findings are relevant to the proposed update of the ICRP human respiratory tract model with revisions to the alveolar-interstitial region based on this long-term particle clearance and retention model.

Substantial limitations and uncertainties hinder the exposure assessment of engineered nanomaterials (ENMs). The present deficit of reliable measurements and models will inevitably lead in the near term to qualitative and uncertain exposure estimations, which may fail to support adequate risk assessment and management. Therefore it is necessary to complement the current toolset with user-friendly methods for near-term nanosafety evaluation. This paper proposes an approach for relative exposure screening of ENMs. For the first time, an exposure model explicitly implements quantitative weight of evidence (WoE) methods and utilises expert judgement for filling data gaps in the available evidence-base. Application of the framework is illustrated for screening of exposure scenarios for nanoscale titanium dioxide, carbon nanotubes and fullerenes, but it is applicable to other nanomaterials as well. The results show that the WoE-based model overestimates exposure for scenarios where expert judgement was substantially used to fill data gaps, which suggests its conservative nature. In order to test how variations in input data influence the obtained results, probabilistic Monte Carlo sensitivity analysis was applied to demonstrate that the model performs in stable manner.

The toxicology of nanoparticles (NPs) is an area of intense investigation that would be greatly aided by improved understanding of the relationship between NP structure and inflammogenicity. To evaluate how their physicochemical parameters influence toxicity, we assembled a panel of 15 metal/metal oxide NPs and attempted to relate various physicochemical parameters, including zeta potential (ζP) and solubility, to lung inflammogenicity. The acute pulmonary inflammogenicity of the 15 NPs showed a significant correlation with one of two structural parameters-ζP under acid conditions for low-solubility NPs and solubility to toxic species for high-solubility NPs. ζP is the electrical potential created between the surface of a particle, with its associated ions, and the medium it exists in and provides information concerning the particle surface charge. We suggest that inside the phagolysosome under acid conditions, a high positive ζP may allow NPs to damage the integrity of the phagolysosomal membrane leading to inflammation. In the case of high-solubility NPs, inflammogenicity depends on the ions that are produced during dissolution of NP inside the acidic phagolysosomes; if the ions are toxic, then phagolysosomes will be destabilized and cause inflammation. These two parameters may have utility in preliminary assessment of the potential lung inflammation hazard of the large number of NPs that require testing.

This special issue of Nanotoxicology reviews the biological significance of the available information on the genotoxicity of engineered nanomaterials (ENM). The papers herein discuss approaches to ...

New developments in technology usually entail some hazard as well as advantage to a society. Hazard of a material translates into risk by exposure of humans and/or their environment to the agent in question, and risk is reduced by control of exposure, usually guided by regulation based on understanding of the mechanisms of harm. We illustrate risks relating to the causation of diseases associated with exposure to aerosols of combustion particles and asbestos, leading to paradigms of particle toxicity, and discuss analogies with potential exposure to manufactured nanoparticles (NPs). We review the current understanding of the hazard of NPs derived from the new science of nanotoxicology and the limited research to date into human exposure to these particles. We identify gaps in knowledge relating to the properties of NPs that might determine toxicity and in understanding the most appropriate ways both to measure this in the laboratory and to assess it in the workplace. Nevertheless, we point out that physical principles governing the behaviour of such particles allow determination of practical methods of protecting those potentially exposed. Finally, we discuss the early steps towards regulation and the difficulties facing regulators in controlling potentially harmful exposures in the absence of sufficient scientific evidence.

The aryl hydrocarbon receptor (AhR) is required for the toxicity of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), and so the AhR of CRL:WI and CRL:WI(Han) rats was characterized. Western blot showed AhR proteins of approximately 110 and approximately 97 kDa in individual rats from both strains. The AhR cDNA from a CRL:WI(Han) rat with the approximately 110-kDa protein revealed a sequence that was identical to that of the CRL:WI and SD rat. However, cloning of the AhR from a rat with the approximately 97-kDa protein revealed a point mutation, and five variants encoding two C-terminally truncated variants of the AhR protein, arising from a point mutation in the intron/exon junction and consequent differential splicing. These C-terminally truncated variants were expressed and shown to give rise to a protein of approximately 97 kDa; the recombinant AhR bound TCDD with an affinity that was not statistically different from the full-length protein. A single-nucleotide polymorphism assay was developed, and showed that both alleles were represented in a Hardy-Weinberg equilibrium in samples of CRL:WI and CRL:WI(Han) populations; both alleles are abundant. Rats from two studies of TCDD developmental toxicity were genotyped, and the association with toxicity investigated using statistical analysis. There was no plausible evidence that the AhR allele had a significant effect on the toxic endpoints examined. These data show that the two AhR alleles are common in two strains of Wistar rat, and that the AhR alleles had no effect on TCDD-induced developmental toxicity in two independent studies.

We compared the effects of a single acute dose, or chronic fetal exposure, to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) on the male reproductive system of the Wistar(Han) rat. Tissue samples were taken from dams on gestation day (GD)16 and GD21, and from offspring on postnatal days (PND)70 and 120. Steady-state concentration of TCDD was demonstrated in the chronic study: body burdens were comparable in both studies. Fetal TCDD concentrations were comparable after acute and chronic exposure, and demonstrate more potent toxicity after chronic versus acute dosing. In maternal liver, cytochrome P450 (CYP)1A1 and CYP1A2 RNA were induced. In fetus, there was induction of both CYP1A1 and CYP1A2 RNA at medium and high doses, but inadequate evidence for induction at low dose in either study. The low level induction of CYP1A1 RNA at low dose in fetus argues against AhR activation in fetus as a mechanism of toxicity of TCDD in causing delay in balanopreputial separation (BPS), and the greater induction of CYP1A1 RNA in PND70 offspring liver from chronically-dosed dams suggests that lactational transfer of TCDD is crucial to this toxicity. These data characterize the maternal and fetal disposition of TCDD, induction of CYP1A1 RNA as a measure of AhR activation, and suggest that lactational transfer of TCDD determines the difference in delay in BPS between the two studies.

We have investigated whether fetal exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) causes defects in the male reproductive system of the rat using chronically exposed rats to ensure continuous exposure of the fetus. Five- to six-week-old rats were exposed to control diet, or diet containing TCDD, to attain an average dose of 2.4, 8, and 46 ng TCDD/kg/day for 12 weeks, whereupon the rats were mated and allowed to litter; rats were switched to control diet after parturition. Male offsprings were allowed to develop until kills on PND70 (25 per group) or PND120 (all remaining animals). Offspring from the high-dose group showed an increase in total litter loss, and the number of animals alive on postnatal day (PND)4 in the high-dose group was approximately 26% less than control. The high and medium dose offsprings showed decreased weights at various ages. Balano-preputial separation (BPS) was significantly delayed in all three dose groups compared to control. There were no significant effects of maternal treatment when the offsprings were subjected to a functional observational battery or learning tests, with the exception that the high-dose group showed a deficit in motor activity. Twenty rats per group were mated to females, and there were no significant effects of maternal treatment on the fertility of these rats or on the F1 or F2 sex ratio. Sperm parameters at PND70 and 120 showed no significant effect of maternal treatment, with the exception that there was an increase in the proportion of abnormal sperm in the high-dose group at PND70; this is associated with the developmental delay in puberty in this dose group. There were no remarkable findings of maternal treatment on organ weights, with the exception that testis weights were reduced by approximately 10% at PND70 (but not PND120), and although the experiment was sufficiently powered to detect small changes, ventral prostate weight was not reduced. There were no significant effects of maternal treatment upon histopathological comparison of high-dose and control group organs. These data confirm that developmental exposure to TCDD shows no potent effect on adult sperm parameters or accessory sexual organs, but show that delay in BPS occurs after exposure to low doses of TCDD, and this is dependent upon whether TCDD is administered acutely or chronically.

This review considers the molecular toxicology of combustion-derived nanoparticles (CDNP) following inhalation exposure. CDNP originate from a number of sources and in this review we consider diesel soot, welding fume, carbon black and coal fly ash. A substantial literature demonstrates that these pose a hazard to the lungs through their potential to cause oxidative stress, inflammation and cancer; they also have the potential to redistribute to other organs following pulmonary deposition. These different CDNP show considerable heterogeneity in composition and solubility, meaning that oxidative stress may originate from different components depending on the particle under consideration. Key CDNP-associated properties of large surface area and the presence of metals and organics all have the potential to produce oxidative stress. CDNP may also exert genotoxic effects, depending on their composition. CDNP and their components also have the potential to translocate to the brain and also the blood, and thereby reach other targets such as the cardiovascular system, spleen and liver. CDNP therefore can be seen as a group of particulate toxins unified by a common mechanism of injury and properties of translocation which have the potential to mediate a range of adverse effects in the lungs and other organs and warrant further research.

Nanotechnology is one of the most important technological developments of the 21st century. In silico methods to predict toxicity, such as quantitative structure–activity relationships (QSARs), promote the safe-by-design approach for the development of new materials, including nanomaterials. In this study, a set of cytotoxicity experimental data corresponding to 19 data points for silica nanomaterials were investigated, to compare the widely employed CORAL and Random Forest approaches in terms of their usefulness for developing so-called ‘nano-QSAR’ models. ‘External’ leave-one-out cross-validation (LOO) analysis was performed, to validate the two different approaches. An analysis of variable importance measures and signed feature contributions for both algorithms was undertaken, in order to interpret the models developed. CORAL showed a more pronounced difference between the average coefficient of determination (R2) for training and for LOO (0.83 and 0.65 for training and LOO, respectively), compared to Random Forest (0.87 and 0.78 without bootstrap sampling, 0.90 and 0.78 with bootstrap sampling), which may be due to overfitting. With regard to the physicochemical properties of the nanomaterials, the aspect ratio and zeta potential were found to be the two most important variables for Random Forest, and the average feature contributions calculated for the corresponding descriptors were consistent with the clear trends observed in the data set: less negative zeta potential values and lower aspect ratio values were associated with higher cytotoxicity. In contrast, CORAL failed to capture these trends.

It has been reported that fetal exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) causes defects in the male reproductive system of the rat. We set out to replicate and extend these effects using a robust experimental design. Groups of 75 (control vehicle) or 55 (50, 200, or 1000 ng of TCDD/kg bodyweight) female Wistar(Han) rats were exposed to TCDD on gestational day (GD)15, then allowed to litter. The high-dose group dams showed no sustained weight loss compared to control, but four animals had total litter loss. Pups in the high-dose group showed reduced body weight up till day 21, and pups in the medium dose group showed reduced body weight in the first week postpartum. Balano-preputial separation was significantly delayed in the high-dose group male offspring. There were no significant effects of treatment when the offspring were subjected to a functional observational battery or mated with females to assess reproductive capability. Twenty-five males per group were killed on postnatal day (PND) 70, and approximately 60 animals per group (approximately 30 for the high-dose group) on PND120 to assess seminology and other end points. At PND120, the two highest dose groups showed a statistically significant elevation of sperm counts, compared to control; however, this effect was small (approximately 30%), within the normal range of sperm counts for this strain of rat, was not reflected in testicular spermatid counts nor PND70 data, and is therefore postulated to have no biological significance. Although there was an increase in the proportion of abnormal sperm at PND70, seminology parameters were otherwise unremarkable. Testis weights in the high-dose group were slightly decreased at PND70 and 120, and at PND120, brain weights were decreased in the high-dose group, liver to body weight ratios were increased for all three dose groups, with an increase in inflammatory cell foci in the epididymis in the high-dose group. These data show that TCDD is a potent developmental toxin after exposure of the developing fetus but that acute developmental exposure to TCDD on GD15 caused no decrease in sperm counts.