Search

The uncertainty-based work zone capacity model is formulated as a mixed linear regression function of explanatory variables where capacity is a random variable following a lognormal distribution. Model parameters are calibrated using a Bayesian approach. Results show that the proposed work zone capacity distribution model can accurately predict the mean and prediction interval of work zone capacity at any given confidence level. It is found that work zones located in urban roads, with a larger number of open lanes or with long-term work duration have a larger mean work zone capacity. A short prediction interval (i.e. low uncertainty) for work zone capacity is found to be associated with the following situations: (a) a bigger number of open lanes; (b) rural work zone; (c) short-term work duration; (d) left lane closure; (e) daytime work and (f) a smaller percentage of heavy vehicles. The predicted interval length for the medium level of work intensity is increased, although the corresponding mean work zone capacity is reduced, as compared with the light level of work intensity. There will be a bigger measured work zone capacity on average if the measurement method is adopted in which work zone capacity is taken as the mean queue-discharge rate. [ABSTRACT FROM AUTHOR]

Investigation of the casualty crash characteristics and contributory factors is one of the high-priority issues in traffic safety analysis. In this paper, we propose a method based on association rules to analyze the characteristics and contributory factors of work zone crash casualties. A case study is conducted using the Michigan M-94/I-94/I-94BL/I-94BR work zone crash data from 2004 to 2008. The obtained association rules are divided into two parts including rules with high-lift, and rules with high-support for the further analysis. The results show that almost all the high-lift rules contain either environmental or occupant characteristics. The majority of association rules are centered on specific characteristics, such as drinking driving, the highway with more than 4 lanes, speed-limit over 40 mph and not use of traffic control devices. It should be pointed out that some stronger associated rules were found in the high-support part. With the network visualization, the association rule method can provide more understandable results for investigating the patterns of work zone crash casualties. [ABSTRACT FROM AUTHOR]

The aim of this study is to examine whether the effects of factors contributing to the severity of driver injuries vary between long-term and short-term work zones. Multinomial logistic regression analysis is adopted to model the relationship between the influencing factors and drivers' injury and fatality risks. A case study is created using drivers' injury severity data from the NASS general estimate system, and two separate multinomial logistic regression models are developed. By comparing the model results, it is found that the light conditions, day of the week, age, gender, airbag availability, restraint use, vehicle age and most harmful event show homogeneous effects on the drivers' injury and fatality risks in the two work zone types. However, the weather, speed limit, traffic control device and number of lanes exhibit opposing effects on the drivers' injury and fatality risks in the two work zone types. [ABSTRACT FROM AUTHOR]

SUMMARY This paper proposed a methodology to estimate rear-end crash potential of the merging vehicles traveling in the merge lane, on the basis of the traffic data extracting from the available videotapes. First, we developed a binary logit model to identify drivers' merging behavior in the work zone merging area. Subsequently, the occurrence potential of rear-end crash based on time-to-collision was computed between the merging vehicle and its neighboring vehicles. The overall crash potential of the merging vehicle was finally determined. It was found that the crash potential decreases with the remaining distance to work zone. Moreover, there will be a rear-end crash potential of 4.0% if the merging vehicle fails to complete merging at the end of work zone merging area. If the merging vehicle takes an early merge, there will be a lower rear-end crash potential (1.2%). These findings suggest that we should encourage merging vehicles to take early merges for improving the traffic safety in the work zone merging areas. Copyright © 2012 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Highlights: [•] Provide a critical review on the approaches to estimating work zone capacity and traffic delay in work zones. [•] Identify the limitations and shortcomings of these approaches. [•] Provide some directions and recommendations for future research. [ABSTRACT FROM AUTHOR]

Abstract: This study aims to analyze the effects of environment, vehicle and driver characteristics on the risky driving behavior at work zones. A decision tree is developed using the classification and regression tree (CART) algorithm to graphically display the relationship between the risky driving behavior and its influencing factors. This approach could avoid the inherent problems occurred in the conventional logistic regression models and further improve the model prediction accuracy. Based on the Michigan M-94/I-94/I-94BL/I-94BR highway work zone driving behavior data, the decision tree comprising 33 leaf nodes is built. Bad weather, poor road and light conditions, partial/no access control, no traffic control devices, turning left/right and driving in an old vehicle are found to be associated with the risky driving behavior at work zones. The middle-aged drivers, who are going straight ahead in their vehicles with medium service time and equipped with an airbag system, are more likely to take risky behavior at lower work zone speed limits. Further, the middle-aged male drivers engage in risky driving behavior more frequently than the middle-aged female drivers. The number of lanes exhibits opposing effects on risky behavior under different traveling conditions. More specifically, the risky driving behavior is associated with the single-lane road under bad light or weather conditions while drivers are more likely to engage in risky behavior on the multi-lane road under good light conditions. [Copyright &y& Elsevier]

Abstract: This paper aims to develop an improved cellular automata (ICA) model for simulating heterogeneous traffic in work zone. The proposed ICA model includes the forwarding rules to update longitudinal speeds and positions of work zone vehicles. The randomization probability parameter used by the ICA is formulated as a function of the activity length, the transition length and the volumes of different types of vehicles traveling across work zone. Compared to the existing cellular automata models, the ICA model possesses a novel and realistic lateral speed and position updating rule so that the simulation of vehicle’s lateral movement in work zone is close to the reality. The ICA model is calibrated and validated microscopically and macroscopically by using the real work zone data. Comparisons of field data and ICA for trajectories, speed and speed–flow relationship in work zone show very close agreement. Finally, the proposed ICA model is applied to estimate traffic delay occurred in work zone. [Copyright &y& Elsevier]

Abstract: This paper proposes a genetic algorithm (GA) approach to assessing work zone casualty risk defined as the likelihood of a vehicle occupant being killed or injured in a work zone crash. The proposed GA approach consists of three components: chromosome coding, fitness function and genetic operators. Based on the Michigan highway work zone crash data, 19 classification rules are identified using the proposed GA approach to determine the work zone casualty risk. The results show that the variable of seat position has the most significant effect on reducing the prediction error of the GA approach. The variables of posted speed limit, traffic control devices and truck or bus involved are found to have no effects on improving the prediction performance. The GA approach outperforms the binary logistic regression technique in terms of the prediction accuracy. This demonstrates that the GA approach is a good alternative for the work zone casualty risk assessment. [Copyright &y& Elsevier]