Search

In this study, novel blends of mycelium biocomposites (MB) were developed. Various combinations of birch sawdust and hemp shives with birch bark (BB) and wheat bran (WB) additives were inoculated with basidiomycete Trametes versicolor to produce self-growing biomaterials. MB were characterized according to mycelial biomass increment in final samples, changes in chemical composition, elemental (C, H, N) analyses, granulometry of substrates, water-related and mechanical properties, as well as mold resistance and biodegradability. The mycelial biomass in manufactured MB increased by ~100% and ~50% in hemp and sawdust substrates, respectively. The lignocellulose ingredients during fungal growth were degraded as follows: cellulose up to 7% and 28% in sawdust and hemp substrates, respectively, and lignin in the range of 13% in both substrates. A larger granulometric fraction in hemp MB ensured higher strength property but weakened water absorption (600–880%) performance. Perspective MB combinations regarding strength performance were hemp/BB and pure hemp MB (σ10 0.19–0.20 MPa; E 2.9 MPa), as well as sawdust/WB combination (σ10 0.23 MPa; E 2.9 MPa). WB positively affected fungal biomass yield, but elevated water absorption ability. WB improved compressive strength in the sawdust samples but decreased it in the hemp samples. BB supplement reduced water absorption by more than 100% and increased the density of sawdust and hemp samples. All MB samples were susceptible to mold contamination after full water immersion, with identified fungal genera Rhizopus, Trichoderma and Achremonium. The MB exhibited high biodegradability after 12 weeks' exposure in compost, and are therefore competitive with non-biodegradable synthetic foam materials. [ABSTRACT FROM AUTHOR]

Hot water extraction of pine wood was carried out after 10 days of exposure to brown-rot fungi ( Gloeophyllum trabeum, Coniophora puteana and Poria placenta) and a white-rot fungus ( Coriolus versicolor). The microstructure of the wood cell wall was analysed by the water vapour sorption method. The content and composition of monosaccharides in the extracts were determined by high performance liquid chromatography. Despite the absence of essential mass losses at the initial stage of the contact with the fungi, slight changes in the cell wall microstructure can be observed, namely, the hydrophobisation and the change in the character of porosity in the region of 1–10 nm pore sizes. After hot water treatment, the mass decreases considerably, i.e., to 25% for the control and brown-rot treated samples and more than 30% for the white-rot treated sample. The sorption-desorption isotherms for the washed control sample and brown-rot samples were not changed practically, but the isotherm was changed clearly in the case of the white-rot treated sample. The microstructure of the white-rot sample changed after hot water washing radically and was accompanied with the formation of wide mesopores in the range of 5–9 nm width. [ABSTRACT FROM AUTHOR]

In this study unique blended biopolymer mycocel from naturally derived biomass was developed. Softwood Kraft (KF) or hemp (HF) cellulose fibers were mixed with fungal fibers (FF) in different ratios and the obtained materials were characterized regarding microstructure, air permeability, mechanical properties, and virus filtration efficiency. The fibers from screened Basidiomycota fungi Ganoderma applanatum (Ga), Fomes fomentarius (Ff), Agaricus bisporus (Ab), and Trametes versicolor (Tv) were applicable for blending with cellulose fibers. Fungi with trimitic hyphal system (Ga, Ff) in combinations with KF formed a microporous membrane with increased air permeability (>8820 mL/min) and limited mechanical strength (tensile index 9–14 Nm/g). HF combination with trimitic fungal hyphae formed a dense fibrillary net with low air permeability (77–115 mL/min) and higher strength 31–36 Nm/g. The hyphal bundles of monomitic fibers of Tv mycelium and Ab stipes made a tight structure with KF with increased strength (26–43 Nm/g) and limited air permeability (14–1630 mL/min). The blends KF FF (Ga) and KF FF (Tv) revealed relatively high virus filtration capacity: the log10 virus titer reduction values (LRV) corresponded to 4.54 LRV and 2.12 LRV, respectively. Mycocel biopolymers are biodegradable and have potential to be used in water microfiltration, food packaging, and virus filtration membranes. [ABSTRACT FROM AUTHOR]