Search

Travertines formed of crystalline crust have been widely reported, but there has not been focus on their geochemical characteristics. We therefore carefully conducted a series of geochemical investigations and U-Th dating on a travertine mound mainly composed of crystalline crust from Sobcha (southwest China) to determine their geochemical features and geological implications. The Sobcha travertines dominantly consist of granular crystals and fan crystals and show δ13C from 3.4‰ to 4.9‰ V-PDB, δ18O from −26.7‰ to −23.7‰ V-PDB, and 87Sr/86Sr from 0.712458 to 0.712951. When normalized to PASS, the Sobcha travertines exhibit MREE enrichment relative to HREE and LREE, HREE enrichment relative to LREE, and positive Eu anomalies. The δ13C signatures and mother CO2 evaluation of the Sobcha travertines show that the Sobcha travertines were thermogene travertines largely receiving mother CO2 from (upper) mantle (i.e., magmatic CO2) or a mixture of soil-derived CO2 and CO2 related to carbonate decarbonation. The 87Sr/86Sr of the Sobcha travertines is out of the 87Sr/86Sr ranges of local deposits exposed at Sobcha and surrounding areas but is well matched with the mean 87Sr/86Sr of Nadi Kangri volcanic rocks which cropped out to the northeast of the studied travertines (over 20 km away). This might indicate the important role of the Nadi Kangri volcanic rocks in suppling Sr to the studied travertines, but more studies are required. The LREE depletion compared to MREE and HREE in the Sobcha travertines was interpreted to be caused by the difference in geochemical mobility between LREEs and HREEs during water–rock interaction at depth, while the MREE enrichment compared to HREE was considered to be most likely inherited from reservoir/aquifer rocks. The positive Eu anomalies of the Sobcha travertines may result from very high reservoir temperatures and/or preferential dissolution of Eu-rich minerals/rocks (especially plagioclase). The Sobcha travertine mounds displays no or very slight vertical variations in δ13C, 87Sr/86Sr, and REE patterns, indicating the compositional stability of mother CO2 and paleo-fluids. However, a significant vertical increase in δ18O was observed and was explained as the result of gradual water temperature decrease related to climate cooling, self-closure of the vents, or mound vertical growth. The findings in this study might help us better understand the deposition of crystalline crust in Ca2+-deficient hot spring systems. [ABSTRACT FROM AUTHOR]

Banded travertines are important parts of fissure ridge systems, but studies on geochemical characterization of banded travertines are limited. This study investigated the lithofacies and stable carbon and oxygen isotopic features of banded travertines from Xiagei (southwestern China) to examine their formation mechanisms. Petrographic analyses of the banded travertines revealed two lithotypes: thick-laminated palisade crystalline crust and thin-laminated composite crystalline crust. δ13C and δ18O of the Xiagei banded travertines range from 2.82‰ to 4.50‰ V-PDB, and from −25.86‰ to −20.90‰ V-PDB. Parent CO2 evaluation shows that the Xiagei banded travertines mainly received CO2 from the decarbonation of marine carbonates, but the contributions of magmatic CO2 and the dissolution of marine carbonates are also unneglectable. Significantly, the magmatic-derived CO2 might indicate that the delamination of the lithosphere along with the asthenosphere upwelling could be taking place in the eastern Tibetan plateau. Paleotemperature calculation shows that the Xiagei travertines were precipitated from moderate- to high-temperature hot springs (44.3 to 86.8 °C). Interestingly, the thick-laminated palisade crystalline crust and thin-laminated composite crystalline crust display calculated paleotemperature between 66.6 and 86.8 °C and between 56.6 and 77.7 °C, respectively, reflecting the great role of water temperature in controlling the lithofacies of banded travertines. A comparison between the banded travertines at Xiagei and other areas also shows temperature is a non-negligible factor controlling banded travertine precipitation. However, this does not mean that water temperature is the decisive controlling factor and more studies on banded travertines are still indispensable to disclose the potential factors controlling the factors/processes affecting banded travertine lithofacies. This study provides a good example for understanding the relationship between lithofacies and stable isotopic geochemical characteristics of travertine deposits. [ABSTRACT FROM AUTHOR]

Travertine mounds are common spring‐constructed landforms with highly variable geometries, but factors controlling their development have not yet been fully understood. To investigate processes linked with their lateral and vertical growth, this study investigated travertine mounds at Heinitang (China) and compared them with typical mounds around the world. Calcium concentration variation modelling and height evaluation of travertine mounds were also performed. The lateral extent of travertine mounds was found to be mainly controlled by Ca2+ and HCO3‐ concentrations and water discharge: relatively small metre‐scale mounds, like those from Heinitang, are largely the products of Ca2+‐deficiency (<150 mg L−1, commonly <100 mg L−1) or HCO3‐‐deficiency (<500 mg L−1) springs with low discharges (<0.1 L s−1), whereas springs with higher Ca2+ and HCO3‐ concentrations and discharges give rise to the formation of wider mounds. Additional factors affecting mound lateral development include infiltration, evaporation, micro‐organisms, water cooling, CO2 degassing and flow paths. Height of travertine mounds cannot be simply considered to represent the piezometric surface, because the vertical growth of travertine mounds is also influenced by the water table change triggered by tectonic pulses and climate fluctuations, and the closing of conduits induced by self‐sealing. The extinction of travertine mounds at Heinitang is, for example, probably caused by the water table lowering triggered by earthquakes or climate drying after 4 kyr bp. These findings offer new inputs for the better understanding of factors controlling travertine mound development and might assist in the reconstruction of fluid properties, hydrodynamics, tectonics and climate fluctuations in fossil geothermal systems with travertine mounds. [ABSTRACT FROM AUTHOR]

Phanerozoic sinter deposits have been reported globally, with their identification mainly based on sedimentological, petrological, and mineralogical studies. In this study, a detailed geochemical investigation, combined with sedimentological characterization, was conducted on the Wugonglilu siliceous deposit, a Cretaceous (106 Ma) sinter in NE China, to examine its genesis. The deposit is inferred as a siliceous hot spring deposit (sinter) owing to its geological setting in an epithermal gold-mining district, its morphologically variable microbial textures typical of subaerial sinters, and nearly pure silica composition. Three lithofacies were recognized in this study, including laminated to thinly bedded sinter, silica-cemented breccia, and epithermal vein, which represent deposits from three contrasting hydrothermal environments. The 87Sr/86Sr ratios of the sinter are similar to the bedrock through which the geothermal fluids passed, namely the Upper Triassic Dajiahe Formation (T 3 dj), a marine siliceous rock unit, and the Lower Cretaceous Datashanlinchang Formation (K 1 d), a rhyolite unit. Results indicate that both underlying units are possible Sr sources of the silica in the Wugonglilu sinter. The REE + Y (rare-earth elements and yttrium) patterns of the sinter exhibit significant variability, primarily due to terrestrial detrital contamination. Differential REE + Y contamination by terrestrial detritus was striking in the white and dark laminae/beds of the laminated to thinly bedded sinter. The white laminae/beds, generally less contaminated, were probably formed during the dry season, whereas the dark laminae/beds exhibiting greater detrital contamination were likely formed during the wet season. When excluding the samples strongly contaminated by detritus, the sinter exhibits Y anomalies comparable to Post-Archean Australian Shale (PAAS), and to the adjacent underlying K 1 d rhyolite and T 3 dj siliceous rock samples, indicating that these anomalies were not inherited from rocks dominating the reservoirs. Furthermore, the sinter shows a (Ce/Ce*) N range close to that of the underlying marine siliceous rock and rhyolite samples, reflecting that the (Ce/Ce*) N of the sinter is largely inherited from the reservoir rock(s). The overall REE + Y patterns of the sinter range from nearly flat to LREE-depleted, similar to some samples of the K 1 d rhyolite and T 3 dj siliceous rock units. However, most samples of the K 1 d rhyolite and T 3 dj siliceous rock display (Pr/Tb) N and (Pr/Yb) N higher than many studied sinter samples. This is likely because of the formation of strong HREE–carbonate complexes during groundwater migration. Based on these results, a generalized formation model of the studied sinter system was constructed. This study suggests that integrated sedimentological and geochemical investigations can aid in interpreting the genesis of sinter deposits, in particular the link between sinter deposits and corresponding reservoir rocks. [ABSTRACT FROM AUTHOR]

Travertines are generally considered as carbonate deposits related to Ca-rich hot springs. Ca-deficiency hot springs, however, can also produce travertines under suitable conditions and little is known about the travertine deposition and diagenesis in these systems. Therefore, we studied a fossil perched Ca-deficiency spring system at Shihuadong, China to discuss its genesis and diagenesis. This system is a platform-like build-up with travertines developing mainly in the steep frontal area. The travertines were deposited from high-temperature fluids (dominantly 45 °C to 55 °C) with strong interaction mostly with underground Gaoligong Group metamorphic rocks. Their parent CO 2 was originated from magmatic CO 2 and a little soil CO 2. The travertine-depositing paleofluid was predominantly Ca-deficiency hot spring water, but stream water possibly from cold springs on surrounding hills might make a small contribution. The low calcium levels and flat substrate on the top area of the studied system handicapped the travertine deposition, only developing a small perched travertine channel entirely composed of crystalline crust. On the contrary, progressive CO 2 degassing in the top area and increasing CO 2 degassing and water flow rates in the frontal area induced the formation of abundant travertines. However, water scattering/dispersion in the frontal area might not heavily increase the water flow rate and only induced boundstone deposition. After the travertine deposition, underground thermal water, meteoric water, and microbial activity progressively altered the primary fabrics, forming mosaic and need fiber calcite cements, dissolution pores, microborings, and dissolution-induced and microbe-induced micritization. The studied perched spring system shows limited scales, notable progradation but slight aggradation, and the dearth of distal autochthonous travertines, unlike those formed by Ca-rich hot springs, which might extend widely and produce striking distal travertine deposits away from the frontal slope/waterfall. These findings suggest the significant roles of water chemistry and local topography in travertine deposition and the influence of slowly underground thermal water seeping on the diagenesis of travertines in hilly areas and might be used to recognize fossil Ca-deficiency and Ca-rich hot spring systems. [ABSTRACT FROM AUTHOR]

Although fossil fluvial travertines have been described, factors controlling their formation are poorly understood because of the paucity of their modern counterparts. To disclose processes affecting their deposition, a modern fluvial travertine system at Bagni San Filippo (Siena, central Italy) was studied here and compared with other cases. The studied travertines occur in a valley with an ephemeral stream, but continuous water influx from hot springs on the hillside makes part of the stream become perennial. Four sub-environments were recognized: slopes, waterfalls, pools, and channels. The first two are mainly composed of laminated crystalline crust-boundstone. In contrast, pools are mainly covered by lime mud and some post-flood travertine-encrusted breccia, while channels commonly display abundant travertine-encrusted breccia. Many erosional features and products were also found and are largely the result of episodic erosion triggered by heavy rainfalls and accompanied floods. The predominant erosional processes might include abrasion and plucking. Based on environment distribution, stream bed morphology, and erosional distinctions, the fluvial system was distinguished into slope-pool-waterfall and channel-pool-waterfall subsystems. Such system differentiation is attributed to the original stream bed difference: wide beds promoted the development of slopes, while narrow beds encouraged travertine erosion and subsequent gravel accumulation during flood events, favoring the formation of channels. The comparison shows that fluvial travertine deposition largely occurs within existing rivers. The relative contribution of spring water to original river water controls the deposit composition (the higher contribution ratios, the more abundant carbonate/travertine facies). Furthermore, erosion might be common and unavoidable because the reported fluvial travertines were all formed in non-arid regions. These findings suggest that fluvial travertine deposition is influenced by topography, hot spring contribution, original river bed geometry, and fluvial erosion, and might aid in the interpretation of ancient fluvial travertine systems. Additionally, downstream fluvial travertine systems might show similar characteristics to fluvial tufas, but their formation is clearly hot spring influenced, indicating the importance of analyzing facies distribution and δ13C-δ18O signatures in fluvial carbonate studies. [ABSTRACT FROM AUTHOR]