Search

The deteriorating nature of severe functional tricuspid regurgitation (FTR) has led to the heightened interest in this pathology. However, therapies are heterogeneous and an ideal technique is uncertain. The hemodynamic impact on the cardiac chamber following therapeutic repairs has not been well studied, while its analysis could be used to predict the treatment success. In this study, the hemodynamics of the right ventricle (RV) after 1) clover edge-to-edge tricuspid repair, and 2) double orifice tricuspid repair was evaluated in three right heart models using an ex vivo pulsatile platform emulating severe FTR with the aid of stereoscopic particle image velocimetry. Although all repairs substantially reduced tricuspid regurgitant area, they resulted in a more than 50% reduction in diastolic tricuspid valve (TV) opening area. Splitting the TV orifice into multiple smaller orifices by both repairs eliminated the ring-shaped vortical structure inside the RV observed in FTR cases. Postrepair RV domain was mostly occupied with irregular vortical features and isolated vortex residuals. Moreover, vortical features varied among repair samples, indicating enhanced sensitivity of RV flow to postrepair TV morphology. Compared with clover repair, double orifice subjected the RV to enhanced swirling motions and exposed more regions to vortical motions, potentially indicating better rinsing and lower risk of mural thrombus formation. Double orifice repair increased the levels of RV mean kinetic energy and viscous energy loss than those observed in clover repair, although the impact of these on the cardiac efficiency remains unclear. These preliminary insights could be used to improve future treatment design and planning. NEW & NOTEWORTHY While clover and double orifice tricuspid repairs markedly improved leaflet coaptation, they substantially reduced diastolic tricuspid opening area. Postrepair right ventricle (RV) exhibited specific hemodynamic traits, including the loss of ring-shaped vortical structure and the enhanced sensitivity of RV flow to postrepair tricuspid valve morphology. Compared with clover technique, double orifice repair led to higher swirling motions in the RV domain, which could indicate lower risk of mural thrombus formation.

There has been a resurgence of interest in the treatment of severe functional tricuspid regurgitation (FTR) due to the awareness of its poor outcomes and potential percutaneous therapies. Kay bicuspidization has been adapted in percutaneous therapies but its clinical outcome remains uncertain. The present study evaluates the efficacy of Kay repair in a novel ex vivo pulsatile system. Porcine tricuspid valve (TV) (n = 3) was extracted and incorporated into a patient-specific silicon right ventricle (RV) emulating severe FTR, on which Kay repair was subsequently performed. TV area metrics and RV hemodynamic assessment by means of stereo-scopic particle image velocimetry were quantified in both FTR and post-repair conditions. Bicuspidization led to significant increase in cardiac output although the overall increment due to this approach alone was generally small, possibly due to existence of residual TR and the large reduction in TV opening area. Kinetic energy and viscous loss levels were increased post-repair, especially during diastolic filling. Main vortex structures generally maintained post-procedural. However, there was enhanced swirling motion in larger RV domain. Although this might reduce mural-thrombus risk, the relatively more complex vortex phenomenon likely resulted in elevated viscous loss observed and may potentially impact long-term adaptation. The RV hemodynamic alteration after tricuspid repair could be used to predict the success of these future transcatheter solutions.

The concept of heterotopic implantation of transcatheter tricuspid valve is new and has shown promising results thus far. While the Reynolds shear stress values measured in the vicinity of this valve are relatively low, the values at some time points are higher than the threshold of platelet activation. Hence, in this study, we aim to reduce these values with an innovative stent design. It was shown that the Reynolds shear stress values measured were lower than those of valves made of generic stent design and the maximum Reynolds shear stress values in the vicinity of the valves was very low (∼10 dynes/cm2 ). The results also depicted the interesting flow phenomenon of this non-physiological treatment approach. Thus, this study has shown that bicaval valves could potentially be considered as a minimally invasive option to treat tricuspid regurgitation and valve design improvements could reduce the flow disturbances that were observed.

The increased understanding of right heart diseases has led to more aggressive interventions to manage functional tricuspid regurgitation (FTR). In some cases of FTR, prosthetic valve replacement is typically considered when concomitant organic components or significant geometrical distortions are involved in the pathology of the tricuspid valve. However, little is known of the performance of current devices in the right heart circulation. In this study, a novel in vitro mock circulatory system that incorporated a realistic tricuspid valve apparatus in a patient-specific silicon right ventricle (RV) was designed and fabricated. The system was calibrated to emulate severe FTR, enabling the investigation of RV hemodynamics in pre- and post-implantation of tri-leaflet tissue implant and bi-leaflet mechanical implant. 2D particle imaging velocimetry was performed to visualize flow and quantify relevant hemodynamic parameters. While our results showed all prosthetic implants improved cardiac output, these implants also subjected the RV to increased turbulence level. Our study also revealed that the implants did not create the optimal behavior of fluid transfer in the RV as we expected. Among the implants tested, tissue implant created the most dominant vortices, which persisted throughout diastole; its observed strong negative vortex could lead to increase energy expenditure due to undesired fluid direction. In contrast, both native valve and mechanical implant had both weaker vortex formation as well as more significant vortex dissipation. Interestingly, the vortex dissipation of native valve was associated with streamlined flow pattern that tended towards the pulmonary outlet, while the mechanical implant generated more regions of flow stagnation within the RV. These findings heighten the imperative to improve designs of current heart valves to be used in the right circulation.

Heterotopic implantation of transcatheter tricuspid valve is a new treatment option for tricuspid regurgitation. Transcatheter tricuspid valves (inferior and superior) are implanted at the cavo-atrial junctions (CAJ) in order to avoid the challenging task of anchoring the valve in the complex tricuspid valve annulus. However, little is known about the complex loading that the valve stent can withstand at the cavo-atrial junction, which is critical for fatigue life prediction and device development. In this study, we developed a finite element based fatigue model taking into account the major fatigue loads that may be acting upon the two caval stents, after deployment. The simulation results showed that both stent designs had a fatigue safety factor (FSF) greater than 1 under these complex loading conditions. It was also observed from our simulation that leaflets loads contributed more towards the fatigue of valved stents compared to the other loads. The fatigue model presented in this study provides a simple, fast and cost-effective tool to quantitatively determine the fatigue resistance of caval valved stents subjected to cyclic loads. The simulated bench testing proposed here can be of great value to the design and development of new prosthetic cava stented valves.

Heterotopic implantation of transcatheter tricuspid valve is a new treatment option for tricuspid regurgitation. Transcatheter tricuspid valves are implanted onto the cavoatrial junction in order to avoid the challenging task of anchoring the valve onto the complex tricuspid valve annulus. However, little is known about optimum extent of oversizing of the valved stent in a vena cava. In this study, we implanted valves of the same diameter onto the larger sized inferior vena cava (IVC) and a smaller sized superior vena cava (SVC). The valve in the IVC was oversized by 10.7% while the valve in the SVC was oversized by 21.6%. Finite element analysis was performed (i) to assess the strain on the nitinol stent during manufacturing and deployment; (ii) the stents were deployed in a patient-specific vena cava model and the intramural stress of the vena cava was calculated computationally. These valves were fabricated and placed in a silicone model of a patient-specific right atrium which was part of a mock circulatory system that emulated the patho-physiological flow rate and pressure of a patient with tricuspid regurgitation. Flow measurements were conducted by particle image velocimetry (PIV). It was found that the maximum crimping strain on the nitinol stent was 6.85% which was lower than the critical threshold of 10%. The maximum stress on the vena cava was located at the spot where the hooks met the wall. The maximum stress on the IVC was 0.5098 MPa while the maximum stress on the SVC was 0.7 MPa. The maximum Reynolds shear stress (mRSS) in the vena cava was found to be higher in the IVC than SVC with the highest mRSS being 1741 dynes/cm(2) found in the region of high flow during the peak flow phase. The overtly oversized valve in the SVC did not cause flow disturbances and exhibited mostly laminar flows. The mRSS at the downstream of the vena cava valve and the middle of the atrium remained at low magnitudes. However, velocity fluctuations were high in the IVC in all the time points measured. In conclusion, oversizing the valve may assist anchorage; yet, careful consideration should be taken in choosing the extent of oversizing as it may lead to adverse effects.

Intra-ventricular flow dynamics has recently emerged as an important evaluation and diagnosis tool in different cardiovascular conditions. The formation of vortex pattern during the cardiac cycle has been suggested to play important epigenetic and energy-modulation roles in cardiac remodelling, adaptations and mal-adaptations. In this new perspective, flow alterations due to different cardiovascular procedures can affect the long-term outcome of those procedures. Especially, repairs and replacements performed on atrioventricular valves are likely to exert direct impact on intra-ventricular flow pattern. In this review, current consensus around the roles of vortex dynamics in cardiac function is discussed. An overview of physiological vortex patterns found in healthy left and right ventricles as well as post-operative ventricular flow phenomenon owing to different atrioventricular valvular procedures are reviewed, followed by the summary of different vortex identification schemes used to characterise intraventricular flow. This paper also emphasises on future research directions towards a comprehensive understanding of intra-cardiac flow and its clinical relevance. The knowledge could encourage more effective pre-operative planning and better outcomes for current clinical practices.

Severe tricuspid regurgitation (TR) is life-threatening but is often undertreated. Many patients with severe TR are denied heart valve replacement surgery because their old age or comorbidities predispose them to a higher risk of surgical complications associated with open-heart surgery. With the advent of transcatheter technology, it is now possible to deliver the valve to the desired location without the need for open-heart surgery. However, presently, there is no commercially available transcatheter tricuspid valve. This may be due to the complex tricuspid valve anatomy, which lacks an anchorage zone for the percutaneous valves. In view of this drawback, we have recently developed and tested two percutaneous caval heart valves that are designed to deploy at the vena cava and atrium junction. The hemodynamic characteristics of these valves are tested in a mock circulatory system with patient-specific silicone atrium and vena cava, which emulates the physiological pressure and flow conditions at the right side of the human heart. Particle imaging velocimetry results showed that flow velocity and the associated Reynolds shear stress (RSS) and the turbulent kinetic energy (TKE) downstream of the valves increased after the implantation of the valves. A maximum flow velocity of 0.94 m/s was observed at the region downstream of the percutaneous valve at the superior vena cava (SVC). Maximum RSS value of 2076.1 dynes/cm(2) was observed downstream of the valve at the inferior vena cava during the deceleration phase while maximum TKE measured was 572.6 J/m(3) at the upstream of the valve in the SVC during the peak flow phase. While these values appear high, they are significantly lower than those reported in prosthetic mitral and aortic valves. Hence, caval stented valves can be potentially considered as a minimally invasive option to treat TR.

The concept of heterotopic implantation of transcatheter tricuspid valve is new and has shown promising results thus far. While the Reynolds shear stress values measured in the vicinity of this valve are relatively low, the values at some time points are higher than the threshold of platelet activation. Hence, in this study, we aim to reduce these values with an innovative stent design. It was shown that the Reynolds shear stress values measured were lower than those of valves made of generic stent design and the maximum Reynolds shear stress values in the vicinity of the valves was very low (∼10 dynes/cm

There has not been much progress in the development of transcatheter tricuspid valves to treat tricuspid regurgitation because of the difficulty in anchoring a stented valve onto the complex tricuspid annulus. Hence, the concept of heterotopic implantation of the transcatheter tricuspid valve onto the cavo-atrial junction was proposed. However, to date there has been no detailed in vitro investigation of the hemodynamic performance of this new device. The study utilises both 2-D and 3-D particle image velocimetry (PIV) to interrogate the flow patterns in the vicinity of the extra-cardiac tricuspid valves in an in vitro physiological flow loop, specifically at four measurement locations in the cavo-atrial anatomy. Comparison of the 2-D and 3-D PIV results revealed that accuracy of 2-D PIV would be acceptable at time point and at measurement locations where the velocity was mostly planar with minimal or low out-of-plane flow such as at the outlet of the superior vena cava valve at the point of valve closure. The results also showed that the RSS in the vicinity of the valves were relatively low (∼150 dynes/cm 2 ) with the exception of that in the leakage jet at the upstream of the valve. The leakage in the leaflets could be a result of the use of aortic valve leaflets which was more suited for the higher pressured environment of the left side of the heart. The stent design could also be customised for implantation in the vena cava. In summary, these issues could be eradicated with improvements to the leaflet and stent design which would enhance the haemodynamics of the post-implantation flow performance.