Search

A microfluidic dielectrophoresis platform consisting of curved microelectrodes was developed and integrated with a Raman spectroscopy system. The electrodes were patterned on a quartz substrate, which has insignificant Raman response, and integrated with a microfluidic channel that was imprinted in poly-dimethylsiloxane (PDMS). We will show that this novel integrated system can be efficiently used for the determination of suspended particle types and the direct mapping of their spatial concentrations. We will also illustrate the system's unique advantages over conventional optical systems. Nanoparticles of tungsten trioxide (WO3) and polystyrene were used in the investigations, as they are Raman active and can be homogeneously suspended in water. [ABSTRACT FROM AUTHOR]

Atomically thin WO3is fabricated using a three-step process, involving wet-chemical synthesis of hydrated-WO3, mechanical exfoliation of fundamental layers and dehydration by annealing at 300 °C. Atomic force microscopy reveals that the minimum resolvable thickness of the hydrated flakes to be ∼1.4 nm, which corresponds to the unit-cell height. The subsequent annealing temperature determines the degree of dehydration and thereby the crystallographic structure of the resultant WO3. The hydrated and dehydrated flakes are characterized by Raman spectroscopy to reveal spectroscopic fingerprints of flake thickness. Thin flakes are also shown to have higher propensity for lithium intercalation, which is also evidenced in Raman planar peak intensity. [ABSTRACT FROM AUTHOR]

Among the available metal oxide nanostructures, tungsten oxide has remained, at times, troublesome to fabricate, with many synthetic methods often requiring exotic equipment and or reagents. In this work, we present a systematic investigation demonstrating a new method for the deposition of anhydrous and hydrated nanostructured tungsten oxide thin films via spin coating. The attributes of these materials include the following: high surface area, controllable deposition, and compatibility with existing semiconductor fabrication infrastructure making this method a suitable candidate for application in the manufacture of gas sensors and dye sensitized solar cells. We will show that it is possible to form micrometer thick highly crystalline nanostructured thin films and, using Raman, SEM, XRD, XPS, and TEM analysis, will prove that these nanostructures can be rendered into anhydrous or partially or fully hydrated tungsten oxides. We further demonstrate the application of these materials in the fabrication of an inexpensive NO2gas sensor, capable of sensing sub-ppm levels of NO2concentrations at a modest operating temperature of 175 °C. [ABSTRACT FROM AUTHOR]