Search

The present-day condition of a grey cast iron (GCI) tunnel was investigated numerically by means of a series of plane-strain geotechnical analyses that focused on establishing the influence of the modelling approach adopted to simulate the behaviour of longitudinal tunnel joints. The GCI tunnel lining was simulated in three different ways: (i) as a continuous lining; (ii) as a jointed lining adopting a simple joint model that neglects the presence of the joint bolts and (iii) as a jointed lining adopting a more sophisticated model that considers both the nonlinear response of the joint after opening and the contribution of the bolts to the ultimate capacity. The numerical results demonstrate that accounting for the tunnel joints has a considerable impact on the tunnel response. Significant differences are also observed in the results obtained with the two joint models, hence demonstrating the practical significance of employing an advanced model able to reproduce accurately the rotational behaviour of the joint. The drainage behaviour of the joints was also investigated and the numerical results indicate that drainage even through only the knee joints causes significantly more soil consolidation than that from a watertight tunnel and consequently, larger tunnel deformations and forces. [ABSTRACT FROM AUTHOR]

The structural assessment of segmental grey cast iron (GCI) tunnel linings to nearby construction is challenging due to the presence of the joints affecting the stiffness of the tunnel lining. This paper presents an extensive investigation, using 3D finite element (FE) analyses, into the bending moment-rotation (M-θ) behaviour of two GCI tunnel joint geometries. These two geometries correspond to standard running and station tunnels of the London Underground network. The contribution of this study is two-fold. i) The novel characterisation of the M-θ response enables the development of new models for simulating the mechanical response of GCI tunnel joints with structural elements which can be used in simplified, 2D geotechnical analysis for tunnel safety assessments. ii) The analyses provide insight into the behaviour of GCI tunnel linings that would be difficult to achieve through experimental and field observations alone. More specifically, the analyses show that when the bolts are removed from the joints the possibility of tensile failure can be disregarded; that the initial bolt preload influences the rotational stiffness only after some rotation has taken place and does not alter the bending moment of opening; and that the out-of-plane displacement restraint has little influence on the joint response. [ABSTRACT FROM AUTHOR]

The structural response of a segmental grey cast iron (GCI) tunnel lining ring under distortion was investigated by means of finite element (FE) analysis. Building on previous experimental investigations, a 3D numerical model, capable of reproducing accurately the behaviour observed in the laboratory, was developed with the aim of providing guidelines for the structural assessment of GCI linings in engineering practice. A comprehensive validation of the segmental ring model with the laboratory data was first completed. Subsequently, a parametric study was conducted using a set-up that replicated the widely adopted elastic continuum method, so that differences between the numerical and the analytical solution could be attributed to the presence of the longitudinal joints. In this manner, the influence of the joints on the ring response was quantitatively established and recommendations for routine engineering calculations developed. A set of bending stiffness reduction factors are proposed as a function of the tunnel ovalisation, providing upper and lower limits of the bending stiffness, as well as a global reduction factor which is an average measure of the bending stiffness reduction. These factors can be integrated into the calculation procedure of closed-form solutions in order to account for the segmental nature of GCI linings. [ABSTRACT FROM AUTHOR]