Search

With the gradual depletion of high-grade uranium resources in southern China, it is necessary to recover uranium from low-grade complex and refractory uranium resources However, the traditional acid mining process has certain drawbacks such as high acid consumption, low uranium recovery, and potential environmental pollution. There is an urgent need to develop new technologies for the extraction of refractory uranium ores. A tonne-scale column bioleaching for low-grade refractory vocanogenic uranium ore containing brannerite and pitchblende was performed. The uranium leaching efficiency reached 85.86% with an acid consumption of only 10.15% after leaching for 130 d. In the bioleaching stage, the Fe3+ concentration had a good correlation with the Eh value; the higher the Fe3+ concentration, the better was the leaching of uranium. The solution pH was kept below 2.5 during the leaching process, which avoided the precipitation of iron and ensured a higher Fe3+ concentration in the solution. Efficient leaching of uranium from UTi2O6 and UO2 was achieved through oxidation of Fe3+ and the action of microorganisms. The results may provide technical support for industrial leaching of low-grade volcanogenic uranium deposits. [ABSTRACT FROM AUTHOR]

Citric acid and oxalic acid, the main metabolites of fungi, have different leaching effects on uranium ore. Herein, uranium leaching from a volcano-litho-type uranium ore using citric acid and oxalic acid was studied by performing soaking experiments in incubator shakers using pure water and H2SO4 as controls. The citric acid is advantageous over oxalic acid in terms of the uranium leaching rate (97% and 67%) and speed for 20 days of leaching. These findings will help optimize the isolation and cultivation conditions of organic acid-producing fungi used for uranium leaching. [ABSTRACT FROM AUTHOR]

The high level of fluorine and low sulfur in the ore could significantly undermine the bioleaching effectiveness. Here, a strategy to improve the bioleaching efficiency by introducing fluoride-resistant mesophilic eosinophils coupled with pyrite supplement was investigated in a bioleaching system with such ore. The results of column and heap bioleaching showed that 89.25% and 90.40% of uranium were recovered with the consortium and pyrite addition, which increased the uranium leaching rates by 13.22% and 8.96% as compared with the sulfuric acid leaching. Hence, it provides a method to improve uranium bioleaching efficiency of the high-fluorine and low-sulfur uranium ore by the consortium adding pyrite. [ABSTRACT FROM AUTHOR]

Bioleaching has lots of advantages compared with traditional heap leaching. In industry, bioleaching of uranium is still facing many problems such as site space, high cost of production, and limited industrial facilities. In this paper, a continued column bioleaching system has been established for leaching a certain uranium ore which contains high fluoride. The analysis of chemical composition of ore shows that the grade of uranium is 0.208%, which is lower than that of other deposits. However, the fluoride content (1.8% of weight) is greater than that of other deposits. This can be toxic for bacteria growth in bioleaching progress. In our continued multicolumns bioleaching experiment, the uranium recovery (89.5%) of 4th column is greater than those of other columns in 120 days, as well as the acid consumption (33.6 g/kg). These results indicate that continued multicolumns bioleaching technology is suitable for leaching this type of ore. The uranium concentration of PLS can be effectively improved, where uranium recovery can be enhanced by the iron exchange system. Furthermore, this continued multicolumns bioleaching system can effectively utilize the remaining acid of PLS, which can reduce the sulfuric acid consumption. The cost of production of uranium can be reduced and this benefits the environment too. [ABSTRACT FROM AUTHOR]

Systematic study of the surface chemical properties of uranium minerals is necessary to improve the uranium ore extracting process. The presented work aims to argue geochemistry and acid hydrometallurgy accessibility of uraninite from the Mianhuakeng (MHK) granite-hosted uranium deposit, South China, which provides insight on this ore extracting domain. Mineralogy, geochemical composition, U–Th–Pb chemical age, and uranium deportment of the uraninite were systematically analyzed by using scanning electron microscope with energy dispersion spectrum (SEM-EDS), an electron probe microanalyzer (EPMA), and x-ray photoelectron spectroscopy (XPS). The results showed that uraninite was intergrowth with coffinite, probably due to uraninite being partly metasomatized into coffinite along the fissures. The major element content of uraninite such as for UO2, SiO2, and CaO were 79.46 ± 2.03 wt%, 6.19 ± 1.36 wt%, and 5.09 ± 0.80 wt%, respectively. Single-point U–Th–Pb chemical ages for uraninite grains were calculated with the EPMA data, and the results showed ages ranging from a few million to dozens of million years, indicating Pb loss after uraninite formed. Uranium deportment in uraninite generally existed in the forms of UO2, U3O8, and UO3, and mostly showed high valence states suggested by XPS. Uranium on the surface of the uraninite grain was partially oxidized by sulfuric acid leaching, which led to tetravalent uranium converting to hexavalent uranium, suggesting uraninite in the MHK uranium deposit is accessible to be leached by sulfuric acid. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • The smaller uranium ore particle size led to the faster leaching rate of uranium. • The maximum uranium extraction was 64.85% with ore particle size of <15 mm. • Uranium bioleaching process followed a diffusion-controlled kinetics model. Abstract This study evaluated the effectiveness of ore particle size on column bioleaching from low-grade uranium ore using an indigenous Acidithiobacillus ferrooxidans , isolated from local uranium ore. The uranium content was 0.033% by weight and ore particle size was crushed to <50 mm, <30 mm, and <15 mm. The additive content of sulfuric acid 5 g/L, Fe3+ dosage of 5.0 g/L, spray strength of 2.57 L/(h·m2) and temperature of 25 °C were controlled. After 150 days of leaching, acid consumption amounted to 2.73 g H 2 SO 4 per kg ore, the obtained maximum uranium extraction was 64.85% with the ore particle size of <15 mm. The results showed that a smaller particle size ore had a higher uranium extraction and that an economic uranium extraction can be obtained by correctly controlling the ore granularity. [ABSTRACT FROM AUTHOR]