Search

Wood frame buildings are very popular in regions that are exposed to different dynamic excitations including earthquakes. Therefore, their seismic resistance is really important in order to prevent structural damages and human losses. The aim of the present paper is to show the results of experimental tests focused on the dynamic response of wall panels of a wooden frame building with thermal isolation made of mineral wool and polyurethane foam. Firstly, the static and the dynamic mechanical analysis (DMA) tests were conducted so as to determine the basic thermomechanical properties of the analyzed isolation materials. Then, the elements of the exterior walls with two types of thermal insulation were tested under harmonic excitation for different amplitudes of displacement. The results of the static material tests indicate that the polyurethane foam behaves in a highly nonlinear way both during compression and tension. Moreover, the results of the DMA tests show that the storage and loss modulus of the polyurethane foam are significantly larger in relation to the values obtained for the mineral wool. The results of the dynamic tests on wall panels show that the use of polyurethane foam as thermal isolation leads to a substantial increase in stiffness and damping properties, as compared to the case when the mineral wood is used. [ABSTRACT FROM AUTHOR]

The aim of this article is to present the results of a numerical modal analysis of two actual structures of timber frame buildings and the different behaviour due to the used insulation material. One model of the timber structure was filled with mineral wool, while the other with polyurethane foam. During the modal analysis, eigenvalues for both models have been determined. The results of the analysis clearly show the increase of stiffness and damping properties of skeletal constructions achieved by the use of polyurethane foam as the skeleton filling. The numerical model was based on prior experimental test on real scale single frame elements, therefore the result can be assumed to be adequate. [ABSTRACT FROM AUTHOR]