Search

We proposed a new method for the radius of curvature (ROC) of spherical wave measurement based on vortex beam interference and Fermat's spiral fitting, which can not only provide a large measurement range but also have high precision. Theoretical analysis showed that the maximum distribution of the interference light intensity is in accordance with the Fermat's spiral, and the spiral coefficient is proportional to the ROC of spherical wave. For a concave spherical mirror with a ROC of 899.89mm and a convex spherical lens with a ROC of 59.99mm, the average measurement error of five measurements are 0.080% and 0.083%, respectively. Controlled experiments showed that, our proposed method has a higher measurement accuracy and a larger measurement range than Newton's rings method, it has almost equal measurement accuracy for large and small ROC. This research provides a theoretical basis for the development of a ROC measurement system with large measurement range and high precision. [ABSTRACT FROM AUTHOR]

• In this research, we proposed a novel optical surface shapes measurement method based on conformal mapping-angular phase-shifting interferometry. It paves the way for the application of vortex beams in the field of optical surface shape measurement. It is of great significance to the miniaturization design of high-precision interferometers, and can significantly reduce the experimental cost. • We use a Q-plate in the reference optical path to introduce a 90-degree phase shift, and conformal mapping is used to demodulate the surface shape. • This method not only ensures the accuracy of surface shape measurement; but also avoids the use of expensive precision translation stages; and has specific anti-vibration performance. • The measuring device is simple, compact, easy to operate and low cost. We proposed a novel optical surface shapes measurement method based on conformal mapping-angular phase-shifting interferometry (APSI). This method rotates a Q-plate in the reference light path to introduce a 90-degree phase shift. The mathematical tool of conformal mapping is used for surface shape demodulation. After removing the helical phase in the compound phase, high-precision surface shape measurement results are obtained, and the measurement surface shape deviations are 3.33 nm (PV) and 0.26 nm (RMS). This work paves the way for surface shape measurement and compound phase demodulation using vortex beams. [ABSTRACT FROM AUTHOR]

• A simple and effective strategy is proposed to measure the focal lengths. • It enables non-contact measurement and no need to measure the distance between optics components. • The entire measurement system occupies a small space that is easy to set up and operates. This paper proposes a new method to measure the focal lengths of both convex and concave lenses based on vortex beam interference. Theoretical analysis illustrates that the maximum intensity distribution of the interferogram is in accordance with the Fermat's spiral, and the spiral coefficient is proportional to the difference between the focal length of the test lens and the distance from the test lens to the camera. In order to calculate the precise focal length, we separately block the light paths to obtain the reference and test beam spots, and get the ratio of these two spot sizes. Then, the ratio and the spiral coefficient are used to determine the focal length. For a biconvex lens with a focal length of 200 mm and a biconcave lens with a focal length of −100 mm, the relative measurement errors are 0.0892 % and 0.0800 %, respectively. This research provides a novel and convenient method for measuring the focal length, and no-sophisticated displacement devices and moving the lens to be measured are required in the measurement. [ABSTRACT FROM AUTHOR]

We propose a novel micro-displacement measurement system that employs a modified reversal shearing interference structure based on vortex beam interference. The micro-displacement in the measurement path caused a change in the light path and resulted in an optical path difference (OPD) between the reference and measurement paths. This OPD led to the rotation of the petal-like pattern obtained by the interference between two paths. The rotation angle of the petal-like pattern was proportional to the OPD caused by micro-displacement. We used the virtual phase-shifting method to extract the helical phase front, and the Radon transform to measure the angle of the helical phase front. We achieved a high-accuracy micro-displacement measurement with a measurement error of less than 0.067 nm when using a vortex beam with a topological charge of six. This system has an extremely simple structure and is easy to adjust. It is of great significance to the miniaturized design of high-precision displacement sensors. • Avoid complex optical path and adjustments to achieve accurate displacement measurements. • Radon transform was used to solve the rotation angle of the dislocation line in the phase front. • Slight swing of the retroreflector will not change the direction of the measurement beam, this structure is more stable for displacement measurement based on conjugated vortex beam interference. [ABSTRACT FROM AUTHOR]