Search

Permeable reactive barriers are commonly used to treat contaminant plumes in the saturated zone. However, no known applications of horizontal permeable reactive barriers (HPRBs) exist for oxidizing volatile organic compounds (VOCs) in the unsaturated zone. In this study, laboratory column experiments were carried out to investigate the ability of a HPRB containing solid potassium permanganate, to oxidize the vapors of trichloroethylene (TCE), toluene, and ethanol migrating upward from a contaminated saturated zone. Results revealed that an increase in initial water saturation and HPRB thickness strongly affected the removal efficiency of the HPRB. Installing the HPRB relatively close to the water table was more effective due to the high background water content and enhanced diffusion of protons and/or hydroxides away from the HPRB. Inserting the HPRB far above the water table caused rapid changes in pH within the HPRB, leading to lower oxidation rates. The pH effects were included in a reactive transport model, which successfully simulated the TCE and toluene experimental observations. Simulations for ethanol were not affected by pH due to condensation of water during ethanol oxidation, which caused some dilution in the HRPB., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The use of permanganate solutions for in-situ chemical oxidation (ISCO) is a well-established groundwater remediation technology, particularly for targeting chlorinated ethenes. The kinetics of oxidation reactions is an important ISCO remediation design aspect that affects the efficiency and oxidant persistence. The overall rate of the ISCO reaction between oxidant and contaminant is typically described using a second-order kinetic model while the second-order rate constant is determined experimentally by means of a pseudo first order approach. However, earlier studies of chlorinated hydrocarbons have yielded a wide range of values for the second-order rate constants. Also, there is limited insight in the kinetics of permanganate reactions with fuel-derived groundwater contaminants such as toluene and ethanol. In this study, batch experiments were carried out to investigate and compare the oxidation kinetics of aqueous trichloroethylene (TCE), ethanol, and toluene in an aqueous potassium permanganate solution. The overall second-order rate constants were determined directly by fitting a second-order model to the data, instead of typically using the pseudo-first-order approach. The second-order reaction rate constants (M(-1) s(-1)) for TCE, toluene, and ethanol were 8.0×10(-1), 2.5×10(-4), and 6.5×10(-4), respectively. Results showed that the inappropriate use of the pseudo-first-order approach in several previous studies produced biased estimates of the second-order rate constants. In our study, this error was expressed as a function of the extent (P/N) in which the reactant concentrations deviated from the stoichiometric ratio of each oxidation reaction. The error associated with the inappropriate use of the pseudo-first-order approach is negatively correlated with the P/N ratio and reached up to 25% of the estimated second-order rate constant in some previous studies of TCE oxidation. Based on our results, a similar relation is valid for the other volatile organic compounds studied., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Volatile organic compounds (VOCs) may frequently contaminate groundwater and pose threat to human health when migrating into the unsaturated soil zone and upward to the indoor air. The kinetic of chemical oxidation has been investigated widely for dissolved VOCs in the saturated zone. But, so far there have been few studies on the use of in situ chemical oxidation (ISCO) of vapour phase contaminants. In this study, batch experiments were carried out to evaluate the oxidation of trichloroethylene (TCE), ethanol, and toluene vapours by solid potassium permanganate. Results revealed that solid potassium permanganate is able to transform the vapour of these compounds into harmless oxidation products. The degradation rates for TCE and ethanol were higher than for toluene. The degradation process was modelled using a kinetic model, linear in the gas concentration of VOC [ML(-3)] and relative surface area of potassium permanganate grains (surface area of potassium permanganate divided by gas volume) [L(-1)]. The second-order reaction rate constants for TCE, ethanol, and toluene were found to be equal to 2.0×10(-6) cm s(-1), 1.7×10(-7) cm s(-1), and 7.0×10(-8) cm s(-1), respectively., (Copyright © 2013 Elsevier Ltd. All rights reserved.)