Search

The parallel-hybrid converter (PHC) based high-voltage dc (HVdc) plant (PHC-HVdc) mandates the injection of additional harmonic-voltage components into its chain-links (CLs) to regulate its output voltage/modulation index (MI). However, these harmonic voltages are restricted to have limited magnitude and their zero crossings must coincide with the respective output voltages of converter. Hence, the operating range of MI for the PHC-HVdc has narrow limits. This article explores the reactive power compensating capabilities of the PHC based static compensator (PHC-STATCOM), which is relieved from the fixed dc source and is free to operate at any MI without requiring any additional efforts. Two degrees of freedom inherent with PHC-STATCOM are discovered, which proves that PHC is utilized to its maximum when applied for reactive compensation. The capacitor voltages of the PHC-STATCOM belonging to different CLs divert from desired value under unbalanced grid/load conditions. By the virtue of degrees of freedom associated with PHC-STATCOM, a capacitor voltage control technique is proposed using fundamental-frequency zero-sequence voltage (FFZSV). The generalized expression of the reference FFZSV is derived, which regulates the capacitor voltages. The loci planes indicating the maximum range of load unbalance that the PHC-STATCOM can compensate with specific grid voltage conditions is obtained and plotted. The working principles and proposed capacitor control are verified using experimental studies. A detailed comparative study is presented to substantiate the advantages of the proposed topology. [ABSTRACT FROM AUTHOR]

A two-stage hybrid isolated dc–dc boost converter for high power and wide input voltage range applications is proposed. It can be used as a front-end dc–dc converter that can boost variable low voltage from a power source [battery (home/industrial inverter/industrial UPS application), fuel-cell or solar-PV] and interface it to a high-voltage dc-ink, which typically feeds an inverter. A detailed comparison among the different family of converter topologies for isolated dc–dc boost application is carried out that can prove to be useful for power electronics engineers to choose the correct topology for a given input voltage range. The quantitative comparison takes into account the power device utilization, transformer utilization, capacitance utilization, and inductive energy requirement. Based on the comparison, it is shown that with input voltage variation greater than ±20%, two-stage hybrid isolated dc–dc boost converter is superior compared to other family of converters. Design details for the two-stage converter are provided. The converter is developed and tested for a 5 KW inverter application with an input dc voltage range of 90–170 V and output ac voltage of 230 V. Theoretical analysis for loss calculations is also provided which closely matches the experimental results. [ABSTRACT FROM AUTHOR]

The circulating current and the large energy storage requirement are the two major limitations of the modular multilevel converter (MMC). The circulating current in MMC is majorly, in addition to the dc, second harmonic in nature. If not controlled properly, it results in reduced efficiency and/or increased energy storage requirement (ESR). To enhance the efficiency, the second and the higher order harmonic components in the circulating current of MMC are required to be suppressed. On the other hand, controlling the circulating current to have predefined magnitude and phase angle can reduce the ESR. There are many control methods available in the literature to suppress and, also, to control the second harmonic circulating current (SHCC). These methods are mainly based on sensing the arm current and calculating the SHCC and then suppressing or controlling it based on the set objectives. In this article, two control schemes are proposed to suppress the SHCC and to reduce the ESR. The proposed schemes are based on utilizing the instantaneous voltage signals of the submodule capacitors in MMC. Hence, the sensing and communicating the sensed signal of arm currents can be avoided using the proposed schemes, which increases the reliability and leads to reduced cost and complexity. The efficacy of the proposed control schemes is verified using the simulation studies and also by using the scaled-down lab prototype of a three-phase seven-level MMC. [ABSTRACT FROM AUTHOR]

The modular multilevel converter (MMC) is the most preferred voltage source converter high voltage direct current (VSC-HVdc) topology. However, its limitations such as, large energy storage requirements and a large number of devices and capacitors required in its chain-links (CLs), have led to the development of some hybrid multilevel converter topologies. These topologies aim to address the major technical constraints of MMC. The parallel hybrid converter (PHC) is such a hybrid topology, which has evolved as a promising alternative for high power applications because its CLs are not subjected to the fundamental component of ac current and hence the size of its submodule capacitors is substantially lower. Furthermore, for the same power rating, the device count in PHC is only a fraction of that in MMC. However, the PHC suffers from some operational constraints. The dc and ac sides of PHC are strongly coupled, which leads to a single stable operating point resulting in a fixed output voltage if a dedicated controller is not used to tackle this issue. Moreover, the PHC loses control during dc-side faults and it also necessitates a bulky dc filter inductor to filter the dc-side harmonics. Various advanced control methods and derived PHC topologies have been proposed in literature to eradicate these shortcomings of the PHC. This article presents a detailed analysis and review of these state-of-art control strategies and derived PHC topologies. The capability of the PHC and the derived topologies to ride through ac and dc faults are also discussed. This article contributes in summarizing key benefits and limitations of various existing control methods through extensive analyses, simulation, and experimental studies. [ABSTRACT FROM AUTHOR]

The submodule capacitor voltage sensing and balancing is necessary for proper operation of modular multilevel converters (MMC). Voltage controlled oscillator is used for capacitor voltage measurement in the reported literature where voltage sensor is required to be calibrated. In this article, a voltage sensing method that does not need calibration of individual voltage sensors is used for capacitor voltage measurement. Moreover, a simplified sorting algorithm is employed for capacitor voltage balancing. A method of sorting the capacitor voltages that selects the submodules to be inserted directly based on logic equations is used as compared to the conventional methods of arranging them in ascending or descending order. This facilitates to simplifying the sorting technique and the scheme is easy to implement using any controller. Furthermore, to simplify the overall MMC control, the decentralized control arrangement is developed. Fairly good capacitor voltage balancing is obtained. The proposed balancing and sensing schemes of submodule capacitors are validated on a three-phase seven-level MMC hardware prototype with six submodules per arm. The prototype is tested for different operating conditions such as precharging, circulating current control, and grid connected operation of MMC. [ABSTRACT FROM AUTHOR]

The parallel hybrid converter (PHC) offers compact and highly efficient converter solution for high-power applications. One of the major drawbacks of PHC is the requirement of a bulky dc-side inductor to minimize the dc ripples. Modified third-harmonic injection method and zero-sequence voltage injection method can minimize these ripples. However, their complete mitigation is not possible with these existing methods. In this letter, a new control scheme is proposed, which eliminates the dc-side voltage/current ripple by injecting a suitable common-mode voltage into the chain-link of PHC. The presented method also increases the ac output voltage for a given dc-link voltage and effective utilization of the available dc voltage is achieved. Hence, an enhanced-PHC (EPHC) topology is achieved. The analyses presented are verified using PSCAD/EMTDC. A 25-level EPHC–HVdc system is also developed to substantiate the applicability of the proposed method for HVdc system. Experimental studies are performed using a three-phase 13-level laboratory prototype in order to verify the simulation outcomes and the findings acquired are observed to be in agreement with the simulation studies. [ABSTRACT FROM AUTHOR]

An H-bridge hybrid modular converter (HBHMC) is proposed for high-voltage direct current (HVDC) applications. It uses a wave-shaping circuit consisting of series-connected full-bridge submodules (FBSMs) at the output of the main H-bridge converter. For a three-phase system, three HBHMCs are connected either in series (series-HBHMC) or in parallel (parallel-HBHMC) across the dc-link. The operating modes of HBHMC, novel modulation strategies for voltage balancing of FBSMs, and control of HBHMC-based HVDC system are presented in this paper. A detailed comparison between HBHMC and other hybrid topologies is performed on the basis of required number of switches and capacitors. The HBHMC has the features of dc fault blocking capability, lower footprint structure, and extra degree of freedom for submodules capacitor voltage balancing. The efficacy of the HBHMC-based HVDC system for three-phase balanced and unbalanced grid conditions and its fault-tolerant capability are validated using PSCAD simulation studies. Furthermore, the feasibility of the proposed converter under normal and dc fault conditions and of the proposed capacitor voltage control scheme is validated experimentally by using a three-phase grid-connected HBHMC laboratory prototype. The results demonstrate the effectiveness of the proposed HBHMC topology, control techniques, and satisfactory responses of the HBHMC-based HVDC system. [ABSTRACT FROM AUTHOR]

Several applications such as power supplies for electric precipitators, ozone generation, partial discharge, etc., require ac superimposed dc (ACsDC) voltage supply. Most of such applications use intransigent systems for producing ACsDC voltages. In this paper, three different kinds of flexible power electronic converters are proposed for producing ACsDC voltages. These converters have two power conversion stages: input and output. In the input stage, two isolated dc voltages are obtained by using an isolated three-port dc–dc converter or two isolated two-port dc–dc converters. In the output stage, one of the input-stage dc voltages is used to generate an ac voltage and the obtained ac voltage is added to the remaining input-stage dc voltage to obtain an ACsDC voltage. Based on the converters used in the input stage, the proposed ACsDC converters are named as a dual active bridge (DAB) converter-based ACsDC converter (DAB-ACsDC), triple port active bridge (TAB) converter-based ACsDC converter (TAB-ACsDC), and dual transformer-based asymmetrical triple port active bridge (DT-ATAB) converter-based ACsDC converter (DTATAB-ACsDC). A detailed analysis of these ACsDC converters and their verifications using simulations and experimental studies are presented, which depict that the proposed converters can be used effectively for producing ACsDC voltages. [ABSTRACT FROM AUTHOR]

The hybrid modular multilevel converter with cascaded full bridges (HMMC-CFB) is a recently proposed dc fault tolerant converter topology for high-power applications. It has a director part (DP) consisting of a series of connected half-bridge submodules, and a wave-shaping part (WSP) composed of a series of connected full-bridge submodules (FBSMs). The submodules in DP avoid high voltage stresses and improve synchronization between DP and WSP by slowing down the change rate of DP output voltage. This slowdown is achieved by using a trapezoidal reference signal for DP. The WSP attenuates the voltage harmonics produced by DP. However, the energy exchanged by WSP changes with modulation index, which may cause improper voltage regulation of the submodule capacitors. This paper proposes a new control technique to regulate the energy exchanged by WSP, which uses a variable slope trapezoidal reference signal of DP. To obtain this slope, the feedforward and feedback controllers are used. The feedforward controller gives the value of slope depending on the modulation index (mv) to keep the energy exchanged by WSP nearly equal to zero, whereas the losses and nonideality of the converter are taken care of by the feedback controller. This technique guarantees proper voltage regulation of the submodule capacitors for all modulation indices. The efficacy of the proposed technique is confirmed using simulations and experimentations. This paper also presents a circulating current suppressing controller for HMMC-CFB. The proposed control schemes and dc fault tolerant capability of HMMC-CFB are tested on a grid-connected model built in PSCAD. [ABSTRACT FROM AUTHOR]

The hysteresis modulation for power electronic converters is attractive in many different applications because of its unmatched dynamic response and wide command-tracking bandwidth. Its application and benefits for two-level converters are well understood, but the extension of this strategy to multilevel converters is still under development. This paper summarizes and reviews the various hysteresis modulation approaches available in the literature for multilevel converters. The pros and cons of various techniques are described and compared for tracking the reference signal in order to attain an adequate switching optimization, excellent dynamic responses and high accuracy in steady-state operation. By using the recently developed multilevel hysteresis modulation approaches, the advantages of using several accessible dc potentials in a multilevel inverter have been fully exploited. All of these hysteresis modulation approaches are tested for tracking a current reference when applied to a five-level inverter. The relevant simulation and experimental results are also presented. This study will provide a useful framework and point of reference for the future development of hysteresis modulation for multilevel converters. [ABSTRACT FROM AUTHOR]