Search

Sewage sludge (SS) is increasingly used as an environment functional material to reduce or control pollution and improve plant growth because of the large amounts of carbon and essential plant nutrients in it. To achieve the best application results, it is essential to comprehensively review recent progress in SS utilization. This review aims to fill the gaps in knowledge by describing the properties of SS, and its usage as adsorbents, catalysts and fertilizers, and certain application mechanisms. Although SS generates several benefits for the environment and humans, many challenges still exist to limit the application, including the risks posed by potentially toxic substances (e.g., heavy metals) in SS. Therefore, future research directions are discussed and how to make SS applications more feasible in terms of technology and economy.

Clean energy like hydrogen can be a promising strategy to solve problems of global warming. Photo-fermentation (PF) is an attractive technology for producing biohydrogen from various biowastes cost-effectively and environmentally friendly. However, challenges of low light conversion efficiency and small yields of biohydrogen production still limit its application. Thus, advanced strategies have been investigated to enhance photo-fermentative biohydrogen production. This review discusses advanced technologies that show positive outcomes in improving biohydrogen production by PF, including the following. Firstly, genetic engineering enhances light transfer efficiency, change the activity of enzymes, and improves the content of ATP, ammonium and antibiotic tolerance of photosynthetic bacteria. Secondly, immobilization technology is refined. Thirdly, nanotechnology makes great strides as a scientific technique and fourthly, integration of dark and photo-fermentation technology is possible. Some suggestions for further studies to achieve high levels of efficiency of photo-fermentative biohydrogen production are mentioned in this paper.

As a clean energy carrier, hydrogen is a promising alternative to fossil fuel so as the global growing energy demand can be met. Currently, producing hydrogen from biowastes through fermentation has attracted much attention due to its multiple advantages of biowastes management and valuable energy generation. Nevertheless, conventional dark fermentation (DF) processes are still hindered by the low biohydrogen yields and challenges of biohydrogen purification, which limit their commercialization. In recent years, researchers have focused on various advanced strategies for enhancing biohydrogen yields, such as screening of super hydrogen-producing bacteria, genetic engineering, cell immobilization, nanomaterials utilization, bioreactors modification, and combination of different processes. This paper critically reviews by discussing the above stated technologies employed in DF, respectively, to improve biohydrogen generation and stating challenges and future perspectives on biowaste-based biohydrogen production.

Organic-rich wastewater is a feasible feedstock for biohydrogen production. Numerous review on the performance of microorganisms and the diversity of their communities during a biohydrogen process were published. However, there is still no in-depth overview of enzymes for biohydrogen production from wastewater and their scale-up applications. This review aims at providing an insightful exploration of critical discussion in terms of: (i) the roles and applications of enzymes in wastewater-based biohydrogen fermentation; (ii) systematical introduction to the enzymatic processes of photo fermentation and dark fermentation; (iii) parameters that affect enzymatic performances and measures for enzyme activity/ability enhancement; (iv) biohydrogen production bioreactors; as well as (v) enzymatic biohydrogen production systems and their larger scales application. Furthermore, to assess the best applications of enzymes in biohydrogen production from wastewater, existing problems and feasible future studies on the development of low-cost enzyme production methods and immobilized enzymes, the construction of multiple enzyme cooperation systems, the study of biohydrogen production mechanisms, more effective bioreactor exploration, larger scales enzymatic biohydrogen production, and the enhancement of enzyme activity or ability are also addressed.

This research explores the possibilities of a dual-chamber microbial fuel cell as a biosensor to measure Bisphenol A (BPA) in wastewater. BPA is an organic compound and is considered to be an endocrine disruptor, affecting exposed organisms, the environment, and human health. The performance of the microbial fuel cells (MFCs) was first controlled with specific operational conditions (pH, temperature, fuel feeding rate, and organic loading rate) to obtain the best accuracy of the sensor signal. After that, BPA concentrations varying from 50 to 1000 μg L

The prominent characteristics of the biochar, high porosity, sorption capacity with low density improve the aeration, making it a desirable amendment material for composting process. The composting efficiency was analysed by the impact of rice husk biochar amendment (0, 2, 4, 6, 8 and 10%) in the presence of salts for the co-composting of food waste and swine manure, in composting reactors for 50 days. Results revealed that biochar amendment had improved the degradation rates by microbial activities in comparison with control. The final compost quality was improved by reducing the bulk density (29 - 53%), C/N ratio (29 - 57%), gaseous emissions (CO2, CH4, and NH3) and microbial pathogens (Escherichia coli and Salmonella sp.). However, 6% biochar amendment had significant improvement in compost quality, degradation rates and nutritional value which is recommended as the ideal ratio for obtaining mature compost from the feedstock, food waste and swine manure.

International audience; Nowadays, air pollution is an increasingly important topic, as environmental regulations require limiting pollutant emissions. This problem requires new techniques to reduce emissions by either improving the current emission control systems and processes or installing new hybrid treatment systems. These are of broad diversity, and every system has its advantages and disadvantages. The tendency is, accordingly, to combine various techniques to achieve more acceptable and suitable treatment. Recent studies suggest that the combination of photocatalysis and plasma in a reactor can offer attractive pollutant treatment efficiency with a minimum of partially oxidized by-products than that of these processes taken separately. However, there is little review of the capability of this pairing to treat different brands of pollutants. Besides, available data concerning reactor design with flows treated 10 to 1000 times higher than those studied at the lab scale. This review paid particular attention to determine the reaction mechanisms in terms of engineering and design of combination reactors (plasma and catalysis). Likewise, we developed the effect of critical parameters such as pollutant load, relative humidity, and flow rate to understand the degradation kinetics of specific pollutants individually by using plasma and photocatalysis. Additionally, this review compares different designs of cold plasma reactors combination with heterogeneous catalysis with special attention on synergistic and antagonistic effects of using plasma and photocatalysis processes at the laboratory, pilot, and industrial scales. Therefore, the elements discussed in this review stick well to the first theme on pollution prevention of the special issue concerning pollution prevention and the application of clean technologies to promote a circular (bio) economy.

An attempt has been made in this review to provide some insights into the possible adsorption mechanisms of hexavalent chromium onto layered double hydroxides-based adsorbents by critically examining the past and present literature. Layered double hydroxides (LDH) nanomaterials are typical dual-electronic adsorbents because they exhibit positively charged external surfaces and abundant interlayer anions. A high positive zeta potential value indicates that LDH has a high affinity to Cr(VI) anions in solution through electrostatic attraction. The host interlayer anions (i.e., Cl−, NO3−, SO42−, and CO32−) provide a high anion exchange capacity (53–520 meq/100 g) which is expected to have an excellent exchangeable capacity to Cr(VI) oxyanions in water. Regarding the adsorption-coupled reduction mechanism, when Cr(VI) anions make contact with the electron-donor groups in the LDH, they are partly reduced to Cr(III) cations. The reduced Cr(III) cations are then adsorbed by LDH via numerous interactions, such as isomorphic substitution and complexation. Nonetheless, the adsorption-coupled reduction mechanism is greatly dependent on: (1) the nature of divalent and trivalent salts utilized in LDH preparation, and the types of interlayer anions (i.e., guest intercalated organic anions), and (3) the adsorption experiment conditions. The low Brunauer–Emmett–Teller specific surface area of LDH (1.80–179 m2/g) suggests that pore filling played an insignificant role in Cr(VI) adsorption. The Langmuir maximum adsorption capacity of LDH (Qomax) toward Cr(VI) was significantly affected by the natures of used inorganic salts and synthetic methods of LDH. The Qomax values range from 16.3 mg/g to 726 mg/g. Almost all adsorption processes of Cr(VI) by LDH-based adsorbent occur spontaneously (ΔG° 0) and increase the randomness (ΔS° >0) in the system. Thus, LDH has much potential as a promising material that can effectively remove anion pollutants, especially Cr(VI) anions in industrial wastewater.

Due to the impact of methane, carbon dioxide and nitrous oxide on global warming, the quantity of these greenhouse gases (GHG) emissions from municipal wastewater treatment plants (WWTPs) has attracted more and more attention. Consequently, GHG emissions from the two popular treatment technologies: anaerobic/anoxic/oxic (AAO) process and sequencing batch reactor (SBR) should be properly identified and discussed toward the current situation in developing countries. Direct and indirect carbon dioxide (with and/or without including in Intergovernmental Panel on Climate Change (IPCC) report) are all discussed in this article. This literature study observed that a quantity of total carbon dioxide emissions from SBR (374 g/m3 of wastewater) was double that of AAO whilst 10% of these was direct carbon dioxide. Methane emitted from an SBR was 0.50 g/m3 wastewater while 0.18 g CH4/m3 wastewater was released from an AAO. The level of nitrous oxide from AAO and SBR accounted for 0.97 g/m3 wastewater and 4.20 g/m3 wastewater, respectively. Although these results were collected from different WWTPs and where influent was in various states, GHGs emitted from both biological units and other treatment units in various processes are significant. The results also revealed that aerated zone is the major contributing factor in a wastewater treatment plant to the large amount of GHG emissions.

This study aimed to assess the impacts of organic loading rate (OLR) (435–870 mgCOD/L·d) on nutrients recovery via a double-chamber microbial fuel cell (MFC) for treating domestic wastewater. Electricity generation was also explored at different OLRs, including power density and coulombic efficiency. Experimental results suggested the MFC could successfully treat municipal wastewater with over 90% of organics being removed at a wider range of OLR from 435 to 725 mgCOD/L·d. Besides, the maximum power density achieved in the MFC was 253.84 mW/m2 at the OLR of 435 mgCOD/L·d. Higher OLR may disrupt the recovery of PO43−-P and NH4+-N via the MFC. The same pattern was observed for the coulombic efficiency of the MFC and its highest value was 25.01% at the OLR of 435 mgCOD/L·d. It can be concluded that nutrients and electrical power can be simultaneously recovered from municipal wastewater via the dual-chamber MFC.

This study investigated the growth dynamics of a freshwater and marine microalgae with supported biochemical performance in saline wastewater, the pollutants assimilation by a developed method, and the mechanism of salinity’s effect to pollutants assimilation. Maximal biomass yield was 400–500 mg/L at 0.1–1% salinity while the TOC, NO3−-N, PO43−-P were eliminated 39.5–92.1%, 23–97.4% and 7–30.6%, respectively. The biomass yield and pollutants removal efficiencies reduced significantly when salinity rose from 0.1 to 5%. The freshwater Chlorella vulgaris performed its best with a focus on TOC removal at 0.1% salinity. The marine Chlorella sp. was prominent for removing NO3−-N at 0.1–1% salinity. Through the developed method, the freshwater C. vulgaris competed to the marine microalgae referring to pollutants assimilation up to 5% salinity. This study unveiled the mechanism of salinity’s effect with evidence of salt layer formation and salt accumulation in microalgae.

Accumulation of solid waste has intensified with the increase in world population and industrialization. Most importantly, wastes of animal origin such as animal manures and tannery wastes are a major under-utilized resource in most countries with potential for utilization in crop production. This study evaluated the potential of solid state hydrolyzed tannery animal fleshing (SSF-ANFL) and submerged state hydrolyzed tannery ANFL (SmF-ANFL) vermicompost and compost amended soils on the growth, yield and chemical characteristics of tomatoes. It was interesting to observe that of most measured parameters, the SSF amended treatments resulted in significantly (P

The influence of thermal hydrolysis pretreatment (THP) on physicochemical properties (pH, total solids, volatile solids, chemical oxygen demand, total nitrogen, ammonium nitrogen, volatile fatty acids, viscosity, and cell morphology) and anaerobic biodegradability of highly concentrated waste activated sludge (WAS) with TS content ranging from 1 to 7% was evaluated at different temperatures ranging from 100 to 220 °C. The biomethane potential (BMP) of the WAS was systematically analyzed and evaluated. Images of its cellular structure were also analyzed. The results indicated that THP is a useful method for solubilizing volatile solids and enhancing CH4 production regardless of the TS content of the WAS feed. The ultimate CH4 production determined from the BMP analysis was 313-348 L CH4/kg VS (72.6-74.1% CH4) at the optimum THP temperature of 180 °C. The results showed that THP could improve both the capacity and efficiency of anaerobic digestion, even at a high TS content, and could achieve the dual purpose of sludge reduction and higher energy recovery.

The development of the photobioreactors (PBs) is recently noticeable as cutting-edge technology while the correlation of PBs' engineered elements such as modellings, configurations, biomass yields, operating conditions and pollutants removal efficiency still remains complex and unclear. A systematic understanding of PBs is therefore essential. This critical review study is to: (1) describe the modelling approaches and differentiate the outcomes; (2) review and update the novel technical issues of PBs' types; (3) study microalgae growth and control determined by PBs types with comparison made; (4) progress and compare the efficiencies of contaminants removal given by PBs' types and (5) identify the future perspectives of PBs. It is found that Monod model's shortcoming in internal substrate utilization is well fixed by modified Droop model. The corroborated data also remarks an array of PBs' types consisting of flat plate, column, tubular, soft-frame and hybrid configuration in which soft-frame and hybrid are the latest versions with higher flexibility, performance and smaller foot-print. Flat plate PBs is observed with biomass yield being 5 to 20 times higher than other PBs types while soft-frame and membrane PBs can also remove pharmaceutical and personal care products (PPCPs) up to 100%. Looking at an opportunity for PBs in sustainable development, the flat plate PBs are applicable in PB-based architectures and infrastructures indicating an encouraging revenue-raising potential.

Volatile fatty acids (VFAs) produced from organic-rich wastewater by anaerobic digestion attract attention due to the increasing volatile fatty acids market, sustainability and environmentally friendly characteristics. This review aims to give an overview of the roles and applications of enzymes, a biocatalyst which plays a significant role in anaerobic digestion, to enhance volatile fatty acids production. This paper systematically overviewed: (i) the enzymatic pathways of VFAs formation, competition, and consumption; (ii) the applications of enzymes in VFAs production; and (iii) feasible measures to boost the enzymatic processes. Furthermore, this review presents a critical evaluation on the major obstacles and feasible future research directions for the better applications of enzymatic processes to promote VFAs production from wastewater.

A high-resolution soil moisture prediction method has recently gained its importance in various fields such as forestry, agricultural and land management. However, accurate, robust and non- cost prohibitive spatially monitoring of soil moisture is challenging. In this research, a new approach involving the use of advance machine learning (ML) models, and multi-sensor data fusion including Sentinel-1(S1) C-band dual polarimetric synthetic aperture radar (SAR), Sentinel-2 (S2) multispectral data, and ALOS Global Digital Surface Model (ALOS DSM) to predict precisely soil moisture at 10 m spatial resolution across research areas in Australia. The total of 52 predictor variables generated from S1, S2 and ALOS DSM data fusion, including vegetation indices, soil indices, water index, SAR transformation indices, ALOS DSM derived indices like digital model elevation (DEM), slope, and topographic wetness index (TWI). The field soil data from Western Australia was employed. The performance capability of extreme gradient boosting regression (XGBR) together with the genetic algorithm (GA) optimizer for features selection and optimization for soil moisture prediction in bare lands was examined and compared with various scenarios and ML models. The proposed model (the XGBR-GA model) with 21 optimal features obtained from GA was yielded the highest performance (R

Knowing the effluent quality of treatment systems in advance to enable the design of treatment systems that comply with environmental standards is a realistic strategy. This study aims to develop machine learning - based predictive models for designing the subsurface constructed wetlands (SCW). Data from the SCW literature during the period of 2009–2020 included 618 sets and 10 features. Five algorithms namely, Random forest, Classification and Regression trees, Support vector machines, K-nearest neighbors, and Cubist were compared to determine an optimal algorithm. All nine input features including the influent concentrations, C:N ratio, hydraulic loading rate, height, aeration, flow type, feeding, and filter type were confirmed as relevant features for the predictive algorithms. The comparative result revealed that Cubist is the best algorithm with the lowest RMSE (7.77 and 21.77 mg.L−1 for NH4–N and COD, respectively) corresponding to 84% of the variance in the effluents explained. The coefficient of determination of the Cubist algorithm obtained for NH4–N and COD prediction from the test data were 0.92 and 0.93, respectively. Five case studies of the application of SCW design were also exercised and verified by the prediction model. Finally, a fully developed Cubist algorithm-based design tool for SCW was proposed.

This study investigated the effect of CaO2 pretreatment on sulfonamide antibiotics (SMs) remediation by Chlorella sp. Results showed that a CaO2 dose ranging from 0.05 to 0.1 g/g biomass was the best and led to higher SMs removal efficacy 5-10% higher than the control. The contributions made by cometabolism and CaO2 in SMs remediation were very similar. Bioassimilation could remove 24% of sulfadiazine (SDZ) and sulfamethazine (SMZ), and accounted for 38% of sulfamethoxazole (SMX) remediation. Pretreatment by CaO2 wielded a positive effect on microalgae. The extracellular polymeric substances (EPS) level of the CaO2 pretreatment microalgae was three times higher when subjected to non-pretreatment. For the long-term, pretreatment microalgae removed SMs 10-20% more than the non-pretreatment microalgae. Protein fractions of EPS in continuous operation produced up to 90 mg/L for cometabolism. For bioassimilation, SMX intensity of the pretreatment samples was 160-fold less than the non-treatment one. It indicated the CaO2 pretreatment has enhanced the biochemical function of the intracellular environment of microalgae. Peroxidase enzyme involved positively in the cometabolism and degradation of SMs to several metabolites including ring cleavage, hydroxylation and pterin-related conjugation.

This study investigates the performance of microbial fuel cells (MFC) for on-line monitoring ammonium (NH4+-N) in municipal wastewater. A double chamber microbial fuel cell (MFC) was established in a continuous mode under different influent ammonium concentrations ranging from 5 to 40 mg L−1. Results indicated that excess ammonium would inhibit the activity of electrogenic bacteria in the anode chamber and consequently affect electricity production. An inversely linear relationship between concentration and voltage generation was obtained with coefficient R2 0.99 and the MFC could detect up to 40 mg L−1 of NH4+-N. Notably, no further decline was observed in voltage output and there was in fact a further increase in ammonia concentration (>40 mg L−1). The stability and high accuracy of ammonium-based MFC biosensors exposed competitive results compared to traditional analytical tools, confirming the biosensor's reliability. Furthermore, pH 7.0; R 1000 Ω and HRT of 24 h are the best possible conditions for the MFC biosensor for monitoring ammonium. The simplicity in design and operation makes the biosensor more realistic for practical application.

Resistant pollutants like oil, grease, pharmaceuticals, pesticides, and plastics in wastewater are difficult to be degraded by traditional activated sludge methods. These pollutants are prevalent, posing a great threat to aquatic environments and organisms since they are toxic, resistant to natural biodegradation, and create other serious problems. As a high-efficiency biocatalyst, enzymes are proposed for the treatment of these resistant pollutants. This review focused on the roles and applications of enzymes in wastewater treatment. It discusses the influence of enzyme types and their sources, enzymatic processes in resistant pollutants remediation, identification and ecotoxicity assay of enzymatic transformation products, and typically employed enzymatic wastewater treatment systems. Perspectives on the major challenges and feasible future research directions of enzyme-based wastewater treatment are also proposed.

This study evaluated and compared the performance of two vertical flow constructed wetlands (VF) using expanded clay (VF1) and biochar (VF2), of which both are low-cost, eco-friendly, and exhibit potentially high adsorption as compared to conventional filter layers. Both VFs achieved relatively high removal for organic matters (i.e. Biological oxygen demand during 5 days, BOD5) and nitrogen, accounting for 9.5 - 10.5 g.BOD5.m-2.d-1 and 3.5 - 3.6 g.NH4-N.m-2.d-1, respectively. The different filter materials did not exert any significant discrepancy to effluent quality in terms of suspended solids, organic matters and NO3-N (P > 0.05), but they did influence NH4-N effluent as evidenced by the removal rate of that by VF1 and VF2 being of 82.4 ± 5.7 and 84.6 ± 6.4%, respectively (P 2) and the root mean square error (RMSE) of whole fitting data achieved 74.0% and 5.0 mg.L-1, 80.0% and 0.3 mg.L-1, 90.1% and 2.9 mg.L-1, and 48.5% and 0.5 mg.L-1 for BOD5_VF1, NH4-N_VF1, BOD5_VF2, and NH4-N_VF2, respectively.

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Radiation can be lethal at high doses, whereas controlled doses are useful in medical applications. Other applications include power generation, agriculture sterilization, nuclear weapons, and archeology. Radiation damages genetic material, which is reflected in genotoxicity and can cause hereditary damage. In the medical field, it is essential to avoid the harmful effects of radiation. Radiation countermeasures and the need for radioprotective agents have been explored in recent years. Considering plants that evolve in radiative conditions, their ability to protect organisms against radiation has been studied and demonstrated. Crude extracts, fractioned extracts, isolated phytocompounds, and plant polysaccharides from various plants have been used in radioprotection studies, and their efficiency has been proven in various in vitro and in vivo experimental models. It is important to identify the mechanism of action to develop a potent plant-based radioprotective agent. To identify this protective mechanism, it is necessary to understand the damage caused by radiation in biological systems. This review intends to discuss the effects of ionizing radiation on biological systems and evaluate plant-based radioprotectants that have tested thus far as well as their mechanism of action in protecting against the toxic effects of radiation. From the review, the mechanism of radioprotection exhibited by the plant-based products could be understood. Meanwhile, we strongly suggest that the potential products identified so far should undergo clinical trials for critically evaluating their effects and for developing an ideal and compatible radioprotectant with no side-effects.

Microbial fuel cell (MFC) systems are promising technologies for wastewater treatment and renewable energy generation simultaneously. Performance of a double-chamber microbial fuel cell (MFC) to treat synthetic swine wastewater containing sulfonamide antibiotics (SMs) was evaluated in this study. The MFC was operated in continuous modes at different conditions. Results indicated that the current was successfully generated during the operation. The performance of MFC under the sequential anode-cathode operating mode is better than that under the single continuous running mode. Specifically, higher removal efficiency of chemical oxygen demand (>90%) was achieved under the sequential anode-cathode operating mode in comparison with that in the single continuous mode (>80%). Nutrients were also be removed in the MFC's cathode chamber with the maximum removal efficiency of 66.6 ± 1.4% for NH4+-N and 32.1 ± 2.8% for PO43--P. Meanwhile, SMs were partly removed in the sequential anode-cathode operating with the value in a range of 49.4%-59.4% for sulfamethoxazole, 16.8%-19.5% for sulfamethazine and 14.0%-16.3% for sulfadiazine, respectively. SMs' inhibition to remove other pollutants in both electrodes of MFC was observed after SMs exposure, suggesting that SMs exert toxic effects on the microorganisms. A positive correlation was found between the higher NH4+-N concentration used in this study and the removal efficiency of SMs in the cathode chamber. In short, although the continuous flow MFC is feasible for treating swine wastewater containing antibiotics, its removal efficiency of antibiotics requires to be further improved.

This study aims to offer insights into how ciprofloxacin (CIP) impact bacterial community structures in the Sponge-MBR process when CIP is spiked into hospital wastewater. We found that the CIP toxicity decreased richness critical phylotypes such as phylum class ẟ-, β-, ɣ-proteobacteria, and Flavobacteria that co-respond to suppress denitrification and cake fouling to 37% and 28% respectively. Cluster analysis shows that the different community structures were formed under the influence of CIP toxicity. CIP decreased attached growth biomass by 2.3 times while increasing the concentration of permeate nitrate by 3.8 times, greatly affecting TN removal by up to 26%. Ammonia removal was kept stable by inflating the ammonia removal rate (p 0.003), with the wealthy Nitrospira genus guaranteeing the nitrification activity. In addition, we observed an increasing richness of Chloroflexi and Planctomycetes, which may play a role in fouling reduction in the Sponge-MBR. Therefore, if the amount of antibiotics in hospital wastewater continues to increase, it is so important to extend biomass retention for denitrification recovery.

Enzymatic processing has been considered an interesting technology as enzymes play important roles in the process of waste bioconversion, whilst heling to develop valuable products from animal wastes. In this paper, the application of enzymes in animal waste management were critically reviewed in short with respect to utilization in: (i) animal wastewater treatment and (ii) animal manure management. The results indicate that the application of enzymes could increase both chemical oxygen demand (COD) removal efficiency and production of biogas. The enzymatic bioprocesses were found to be affected by the type, source and dosage of enzymes and the operating conditions. Further studies on optimizing the operating conditions and developing cost-effective enzymes for the future large-scale application are therefore necessary.

The two fresh water microalgae species namely Scenedesmus dimorphus and Scenedesmus obliquus were selected as biomass feedstocks for biodiesel production due to high accumulation of their neutral lipid content which mainly composed of three significant biodiesel fatty acids profile viz saturated fatty acids (SFA: ≈ 53%), mono unsaturated fatty acids (MUFA: ≈ 24%) and poly unsaturated fatty acids (PUFA: ≈ 20%). Both algae strains were cultivated with five different nitrogen nutrients via (NH4)2SO4 (ammonium sulphate: AS), NH4NO3 (ammonium nitrate: AN), KNO3 (potassium nitrate: PN), (NH2)2CO (urea: UR) and NaNO3 (sodium nitrate: SN) of concentration ranging from 0.02 to 0.3 M in agricultural medium. The transesterification of micro algal lipids with absolute ethanol medium in the presence of Ni/H2 catalyst and Ni(II)–Schiff base chelate promoter was carried out to yield more algal oil. The extracted biodiesel components were analyzed cost–effectively using UV–Vis,1H NMR, 13C NMR and GC–MS spectral characterization to explore their biodiesel potentiality. The results revealed that the extracted microalgae biodiesels are quite suitable for biodiesel production with higher oxidation stability and cetane number. In this study, S. dimorphus and S. obliquus in the presence of five different nitrogen nutrients of concentration ranging from 0.02 to 0.3 M agar in cultural medium were observed to stimulate them to produce lipid for biodiesel generation. The transesterification of micro algal lipids with absolute ethanol medium in the presence of Ni/H2 catalyst and Ni(II)–Schiff base chelate promoter was carried out to yield more algal oil. The fatty acid composition of the extracted micro algal oils have been identified via UV–Vis, NMR and GC–MS spectral characterization techniques to investigate their biodiesel potentiality. It is noted that increased UR concentration (up to 0.3 M) can effectively enhances biomass production of S. dimorphus and S. obliquus as increased urea levels may enhances biomass production excluding cells may have a low lipid content, at times.

In recent years, lignin valorization is commercially an important and advanced sustainable process for lignocellulosic biomass-based industries, primarily through the depolymerization path. The conversion of the lignin moieties into biofuels and other high value-added products are still challenging to the researchers due to the heterogeneity and complex structure of lignin-containing biomass. Besides, the involvement of different microorganisms that carries varying metabolic and enzymatic complex systems towards degradation and conversion of the lignin moieties also discussed. These microorganisms are frequently short of the traits which are obligatory for the industrial application to achieve maximum yields and productivity. This review mainly focuses on the current progress and developments in the pretreatment routes for enhancing lignin degradation and also assesses the liquid and gaseous biofuel production by fermentation, gasification and hybrid technologies along with the biorefinery schemes which involves the synthesis of high value-added chemicals, biochar and other valuable products.

© 2018 Elsevier Ltd This study aims to investigate the production of volatile fatty acids (VFAs) from low strength wastewater at various hydraulic retention time (HRT) and organic loading rate (OLR) in a continuous anaerobic membrane bioreactor (AnMBR) using glucose as carbon source. This experiment was performed without any selective inhibition of methanogens and the reactor pH was maintained at 7.0 ± 0.1. 48, 24, 18, 12, 8 and 6 h-HRTs were applied and the highest VFA concentration was recorded at 8 h with an overall VFA yield of 48.20 ± 1.21 mg VFA/100 mg COD feed . Three different ORLs were applied (350, 550 and 715 mg COD feed ) at the optimum 8 h-HRT. The acetic and propanoic acid concentration maximums were (1.1845 ± 0.0165 and 0.5160 ± 0.0141 mili-mole/l respectively) at 550 mg COD feed . The isobutyric acid concentration was highest (0.3580 ± 0.0407 mili-mole/l) at 715 mg COD feed indicating butyric-type fermentation at higher organic loading rate.

Nutrients recovery has become a meaningful solution to address shortage in the fertilizer production which is the key issue of nations' food security. The concept of municipal wastewater is based on its ability to be a major potential source for recovered nutrients because of its vast quantity and nutrient-rich base. Microbial fuel cell (MFC) has emerged as a sustainable technology, which is able to recover nutrients and simultaneously generate electricity. In this study a two-chambered MFC was constructed, and operated in a continuous flow mode employing artificial municipal wastewater as a substrate. The effects of hydraulic retention time (HRT) on the recovery of nutrients by MFC were studied. The COD removal rates were insignificantly influenced by varying HRT from 0.35 to 0.69 d, that were over 92%. Furthermore, the recovery rate of nutrients was insignificantly affected while increasing the HRT, which fluctuates from 80% to 90%. In contrast, the maximum power generation declined when HRT increased and the lowest one was 510.3 mV at the HRT of 0.35 d. These results demonstrate that the lab-scale double chamber MFC using municipal wastewater as the substrate can provide a highly effective removal strategy for organic matter, nutrients recovery and electricity output when operating at a specific HRT.

This review examines in detail the production and characteristics of biochar resulting from hydrothermal liquefaction. Specifically, the impact of feedstocks and different process parameters on the properties and yield of biochar by hydrothermal liquefaction has been thoroughly studied. Hydrothermal liquefaction derived biochars, relative to biochars from high-temperature thermochemical processes retain critical functional groups during carbonization and are therefore promising for a wide range of applications. Most of the review’s efforts are to study possible hydrothermal liquefaction biochar applications in various fields, including fuel, metal and dye adsorption, pollutant reduction, animal feed, and biogas catalyst. The feasibility of biochar through the hydrothermal liquefaction process has been analysed via life-cycle assessment and energy evaluation. The article concludes with a brief discussion on possible issues and strategies for the sustainable development of hydrothermal liquefaction-based biochar.

Anaerobic digestion (AD) from organic waste has gained worldwide attention in reducing greenhouse gas emissions, lowering fossil fuel combustion, and facilitating a sustainable renewable energy supply. Biogas mainly consists of methane (CH4) (50–75%), carbon dioxide (CO2) (25–50%), hydrogen sulphides (H2S), hydrogen (H2), ammonia (NH3) (1–2%) and traces of other gases such as oxygen (O2) and nitrogen (N2). Methane can replace fossil fuels in various applications such as heat and power generation and the transportation sector. The degradation of organic waste through an AD process offers many advantages, such as the decrease of pathogens and prevention of odour release. The digestate from anaerobic fermentation is a valuable fertilizer, however, the amount of organic materials currently available for biogas production is still limited. New substrates, as well as more effective conversion technologies, are needed to grow this industry globally. This paper reviewed the latest trends and progress in biogas production technologies including potential feedstock. Recycling of waste has recently become an important topic and has been explored in this paper.

This study investigated a dual-chamber microbial fuel cell-based biosensor (DC-MFC-B) for monitoring copper and arsenic in municipal wastewater. Operational conditions, including pH, flow rate, a load of organic substrate and external resistance load, were optimized to improve the biosensor's sensitivity. The DC-MFC-B's toxicity response was established under the electroactive bacteria inhibition rate function to a specific heavy metal level as well as the recovery of the DC-MFC-B. Results show that the DC-MFC-B was optimized at the operating conditions of 1000 Ω external resistance, COD 300 mg L

Antibiotic wastewater has become a major concern due to the toxicity and recalcitrance of antibiotics. Anaerobic membrane bioreactors (AnMBRs) are considered alternative technology for treating antibiotic wastewater because of their advantages over the conventional anaerobic processes and aerobic MBRs. However, membrane fouling remains the most challenging issue in the AnMBRs' operation and this limits their application. This review critically discusses: (i) antibiotics removal and antibiotic resistance genes (ARGs) in different types of AnMBRs and the impact of antibiotics on membrane fouling and (ii) the integrated AnMBRs systems for fouling control and removal of antibiotics. The presence of antibiotics in AnMBRs could aggravate membrane fouling by influencing fouling-related factors (i.e., sludge particle size, extracellular polymeric substances (EPS), soluble microbial products (SMP), and fouling-related microbial communities). Conclusively, integrated AnMBR systems can be a practical technology for antibiotic wastewater treatment.

Wastewater is now considered to be a vital reusable source of water reuse and saving energy. However, current wastewater has multiple limitations such as high energy costs, large quantities of residuals being generated and lacking in potential resources. Recently, great attention has been paid to microbial fuel cells (MFCs) due to their mild operating conditions where a variety of biodegradable substrates can serve as fuel. MFCs can be used in wastewater treatment facilities to break down organic matter, and they have also been analysed for application as a biosensor such as a sensor for biological oxygen which demands monitoring. MFCs represent an innovation technology solution that is simple and rapid. Despite the advantages of this technology, there are still practical barriers to consider including low electricity production, current instability, high internal resistance and costly materials used. Thus, many problems must be overcome and doing this requires a more detailed analysis of energy production, consumption, and application. Currently, real-world applications of MFCs are limited due to their low power density level of only several thousand mW/m2. Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This paper explores several aspects of MFCs such as anode, cathode and membrane, and in an effort to overcome the practical challenges of this system.

Photobioreactor technology, especially bubble column configuration, employing microalgae cultivation (e.g., Chlorella sp.), is an ideal man-made environment to achieve sufficient microalgae biomass through its strictly operational control. Nutrients, typically N and P, are necessary elements in the cultivation process, which determine biomass yield and productivity. Specifically, N:P ratios have certain effects on microalgae's biomass growth. It is also attractive that microalgae can sequester CO 2 by using that carbon source for photosynthesis and, subsequently, reducing CO 2 emission. Therefore, this study aims to investigate the effect of N:P ratios on Chlorella sp.’s growth, and to study the dynamic of CO 2 fixation in the bubble column photobioreactor. According to our results, N:P ratio of 15:1 could produce the highest biomass yield (3568 ± 158 mg L −1 ). The maximum algae concentration was 105 × 10 6 cells mL −1 , receiving after 92 h. Chlorella sp. was also able to sequester CO 2 at 28 ± 1.2%, while the specific growth rate and carbon fixation rate were observed at 0.064 h −1 and 68.9 ± 1.91 mg L −1 h −1 , respectively. The types of carbon sources (e.g., organic and inorganic carbon) possessed potential impact on microalgae's cultivation.

This study assessed the impact of swine manure (SM) dilution ratio on the microalgal biomass cultivation and further tested for biohydrogen production efficiency from the mixed microalgal biomass. At first, various solid/liquid (S/L) ratio of the SM ranged from 2.5 to 10 g/L was prepared as a nutrient medium for the algal biomass cultivation without addition of the external nutrient sources over a period of 18 d. The peak biomass concentration of 2.57 ± 0.03 g/L was obtained under the initial S/L loading rates of 5 g/L. Further, the cultivated biomass was subjected to two-step (ultrasonication + enzymatic) pretreatment and evaluated for biohydrogen production potential. Results showed that the variable amount of hydrogen production was observed with different S/L ratio of the SM. The peak hydrogen yield of 116 ± 6 mL/g TSadded was observed at the 5 g/L grown SM mixed algal biomass.

Ni-based quaternary disk catalysts were manufactured for low-temperature CO2 methanation reactions, and the reaction activity was examined with respect to the thermal treatment conditions. By applying varying reduction and combustion treatments, the same catalysts were compared, and the Ni oxidation conditions and physical features were confirmed through X-Ray diffraction, scanning electron microscopy, and energy dispersive X-ray analyses. In addition, oxygen adsorption/desorption changes were measured by temperature-programmed reduction after pre-treating with oxygen and hydrogen. The reduction treatment catalyst showed a conversion of 20% at 280 °C, and the 70% calcined catalyst did not form a NiO crystalloid. The activation of the catalyst increased because of NiO movement on the catalyst surface, which enabled easy transformation to metallic Ni. The prepared catalyst is a highly reactive, yet stable, candidate for practical catalytic CO2 methanation.

In this study, a magnetically separable, highly active, and recyclable photocatalyst was synthesized by physico-chemical incorporation of Ag, TiO 2 , and Fe 3 O 4 into one structure. The physical and chemical properties of the catalysts were evaluated by X-ray diffraction, X-ray fluorescence spectrometry, scanning electron microscopy, field emission transmission electron microscopy, energy dispersive X-ray spectroscopy, and diffuse reflectance spectroscopy. The Ag-supported magnetic TiO 2 composite demonstrated desirable properties and features such as a narrow band gap of 1.163 eV, modifiable structure, and high degradation efficiency. The activity and durability of the synthesized photocatalyst in the degradation of methyl orange (MO) in aqueous solutions under visible light irradiation and different experimental conditions were evaluated and compared to those of commercial TiO 2 and Ag/TiO 2 composites. It was found that the synthesized composite showed a much higher MO photodegradation efficiency than the other composites under visible light irradiation. Moreover, it exhibited a high photocatalytic activity and was recoverable and durable; its photocatalytic efficiency in MO removal was consistently higher than 93.1% after five reuses without any evident signs of deactivation. Thus, the developed photocatalyst is a very promising material for practical applications in environmental pollution remediation.

Algae is a well-known organism that its characteristic is prominent for biofuel production and wastewater remediation. This critical review aims to present the applicability of algae with in-depth discussion regarding three key aspects: (i) characterization of algae for its applications; (ii) the technical approaches and their strengths and drawbacks; and (iii) future perspectives of algae-based technologies. The process optimization and combinations with other chemical and biological processes have generated efficiency, in which bio-oil yield is up to 41.1%. Through life cycle assessment, algae bio-energy achieves high energy return than fossil fuel. Thus, the algae-based technologies can reasonably be considered as green approaches. Although selling price of algae bio-oil is still high (about $2 L−1) compared to fossil fuel’s price of $1 L−1, it is expected that the algae bio-oil’s price will become acceptable in the next coming decades and potentially dominate 75% of the market.

Wetland roof (WR) could bring many advantages for tropical cities such as thermal benefits, flood control, green coverage and domestic wastewater treatment. This study investigates wastewater treatment and biomass growth of eight local plants in shallow bed WRs. Results showed that removal rates of WRs were 21-28 kg COD ha-1 day-1, 9-13 kg TN ha-1 day-1 and 0.5-0.9 kg TP ha-1 day-1, respectively. The plants generated more biomass at lower hydraulic loading rate (HLR). Dry biomass growth was 0.4-28.1 g day-1 for average HLR of 247-403 m3 ha-1 day-1. Green leaf area of the plants was ranging as high as 67-99 m2 leaves per m2 of WR. In general, the descent order of Kyllinga brevifoliaRottb (WR8), Cyperus javanicus Houtt (WR5) and Imperata cylindrical (WR4) was suggested as effective vegetations in WR conditions in terms of wastewater treatment, dry biomass growth and green coverage ratio.

This study evaluated the photocatalytic performance of a combination of TiO2-SiO2 film and glycerol for the degradation of methyl orange (MO) dye in wastewater passing through a continuous-flow reactor. A sol–gel TiO2-SiO2 film was synthesized and coated on glass beads as a thin layer using a conventional dip-coating technique. Our XRD and SEM analyses demonstrated that the TiO2-SiO2 nanoparticles contain an anatase (α-TiO2) phase, which enhanced photocatalytic properties. The obtained film was white in color, with a thickness of 0.9–1.2 mm, according to the amount of TiO2-SiO2 that was deposited on the glass beads, which ranged from 1.8 to 2.1 g/l. The photocatalytic activities of the film was evaluated using a continuous-flow reactor, where the effects of initial pH, hydraulic retention time (HRT), UV intensity, glycerol concentration, and initial MO concentration were investigated. Optimized operating conditions were obtained with an initial pH of 7, glycerol concentration of 0.5 g/L, HRT of 7 min, UV intensity exceeding 20 W/m2, and an initial MO concentration of 10 mg/L, which resulted in 91% dye removal efficiency from the water. The correlation between photocatalytic degradation using TiO2-SiO2 in combination with glycerol, and irradiation time, exhibited a pseudo-first-order model.

The quest for finding an effective photocatalyst for environmental remediation and treatment strategies is attracting considerable attentions from scientists. In this study, a new hybrid material, Cu0.5Mg0.5Fe2O4–TiO2, was designed and fabricated using coprecipitation and sol-gel approaches for degrading organic dyes in wastewater. The prepared hybrid materials were fully characterized using scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The results revealed that the Cu0.5Mg0.5Fe2O4–TiO2 hybrid material was successfully synthesized with average particle sizes of 40.09 nm for TiO2 and 27.9 nm for Cu0.5Mg0.5Fe2O4. As the calculated bandgap energy of the hybrid material was approximately 2.86 eV, it could harvest photon energy in the visible region. Results indicate that the Cu0.5Mg0.5Fe2O4–TiO2 also had reasonable magnetic properties with a saturation magnetization value of 11.2 emu/g, which is a level of making easy separation from the solution by an external magnet. The resultant Cu0.5Mg0.5Fe2O4–TiO2 hybrid material revealed better photocatalytic performance for rhodamine B dye (consistent removal rate in the 13.96 × 10−3 min−1) compared with free-standing Cu0.5Mg0.5Fe2O4 and TiO2 materials. The recyclability and photocatalytic mechanism of Cu0.5Mg0.5Fe2O4–TiO2 are also well discussed.

This study investigated the environmental burdens concerning the recycling/recovery process of a wastewater treatment plant's construction material waste and biogas. Detailed data inventories of case studies were employed in several scenarios to explore the role of end-of-life treatment methods. The ReCiPe 2016 and the Greenhouse gas Protocol life cycle impact methods were conducted to measure the impact categories. The construction and demolition phases were considered for recycling potential assessment, while the operational phase was examined for assessing the advantages of energy recovery. Metal and concrete recycling show environmental benefits. Increasing the reprocessing rate requires more water consumption but results in: firstly, a decrease of 18.8% in total damage; secondly, reduces problematic mineral scarcity by 3.9%; and thirdly, a shortfall in fossil fuels amounting to 11.6%. Recycling concrete helps to reduce the amount of GHG emissions 1.4-fold. Different biogas treatment methods contribute to various outcomes. Biogas utilization for on-site energy purposes has more advantages than flaring and offsite consumption. Electricity and heat generation originating from biogas can provide 70% of the energy requirement and replace 100% natural gas usage. Biomethane production from biogas requires extreme power and more resources. Meanwhile, producing heat and electricity can offset 102.9 g of fossil CO2, and manufacturing biomethane contributes the equivalent of 101.2 g of fossil fuel-derived CO2. Reducing 10% of recovered electricity creation could rise 19.19% global warming indicator of the wastewater treatment plant.

Coffee husk, a carbonaceous precursor and common agricultural waste in Vietnam, was utilized to produce activated carbon by hydrothermal carbonization (HTC) with high adsorption capacity for pollutants. The characteristics and adsorption capacity of the hydrochar produced at the first HTC step (180 °C, 6 h) were subjected to further hydrothermal activation (130 °C for 2 h) with a low concentration of potassium hydroxide (ACHC-KOH 1 M), and directly soaked in KOH medium (ACHC-KOH 1:1). The surface area of the activated hydrochar obtained was significantly increased from 33.7 m2/g (raw hydrochar) to 703.9 m2/g for ACHC-KOH 1 M and 743.8 m2/g for ACHC- KOH 1:1, respectively. The maximum methylene blue (MB) adsorption achieved by the activated carbon materials were 357.38, 314.05, and 103.62 mg/g by ACHC-KOH 1 M, ACHC-KOH 1:1, and raw hydrochar, respectively. Adsorption kinetics and isotherms were employed to explain the MB adsorption process. Adsorption data of MB on ACHC-KOH 1 M and ACHC-KOH 1:1 fitted well with Langmuir adsorption isotherm and pseudo-second-order kinetic model. The results show that coffee husk-based activated carbon is a promising sorbent for the removal of MB from aqueous solutions. Compared to other carbonization methods, the HTC method has advantages of using a low temperature and concentration of KOH.

This study investigates the wastewater treatment performance of four local plant species in wetland roof systems (WRs). The tested species include Cyperus Javanicus Hot (WR1), Eleusine Indica (L.) Gaertn (WR2), StruchiumSparganophorum (L.) Kuntze (WR3) and Kyllinga Brevifolia Rottb (WR4). The plant growth rate, nutrient uptake, wastewater treatment performance and leaf coverage were investigated. The WRs were operated at hydraulic loading rates of 353–403 m 3 ha −1 day −1 . As a result, WR4 achieved the highest biomass growth of 73.7 g day −1 (fresh weight) or 12.0 g day −1 (dry weight). The nutrient accumulation of WR4, according to dry biomass, was 1.7% of total nitrogen (TN) and 0.05% of total phosphorus (TP). The highest COD and TN removal rates (33 ± 10 kg COD ha −1 day −1 and 14 ± 4 kg TN ha −1 day −1 , respectively) were also recorded in WR4. There was statistically insignificant difference in TP removal rates (0.4–0.5 kg ha −1 day −1 ) among WRs. In terms of green leaf area coverage, WR1 and WR4 also introduced extremely high specific green leaf area as 98 and 99 m 2 of green leaves per m 2 of wetland area, respectively. Subsequently, WR1 and WR4 performed better than others in a range of benefits providing green area and treating septic tank effluent.