Search

Fecal pollution remains a significant challenge for recreational water quality management worldwide. In response, there is a growing interest in the use of real-time quantitative PCR (qPCR) methods to achieve same-day notification of recreational water quality and associated public health risk as well as to characterize fecal pollution sources for targeted mitigation. However, successful widespread implementation of these technologies requires the development of and access to a high-quality standard control material. Here, we report a single laboratory qPCR performance assessment of the National Institute of Standards and Technology Standard Reference Material 2917 (NIST SRM® 2917), a linearized plasmid DNA construct that functions with 13 recreational water quality qPCR assays. Performance experiments indicate the generation of standard curves with amplification efficiencies ranging from 0.95 ± 0.006 to 0.99 ± 0.008 and coefficient of determination values (R 2 ) ≥ 0.980. Regardless of qPCR assay, variability in repeated measurements at each dilution level were very low (quantification threshold standard deviations ≤ 0.657) and exhibited a heteroscedastic trend characteristic of qPCR standard curves. The influence of a yeast carrier tRNA added to the standard control material buffer was also investigated. Findings demonstrated that NIST SRM® 2917 functions with all qPCR methods and suggests that the future use of this control material by scientists and water quality managers should help reduce variability in concentration estimates and make results more consistent between laboratories., (Published by Elsevier Ltd.)

Somatic and F+ coliphage methods are under consideration as potential routine surface water quality monitoring tools to identify unsafe levels of fecal pollution in recreational waters. However, little is known about the cooccurrence of these virus-based fecal indicators and host-associated genetic markers used to prioritize key pollution sources for remediation. In this study, paired measurements of cultivated coliphage (somatic and F+) and bacterial (E. coli and enterococci) general fecal indicators and genetic markers indicative of human (HF183/BacR287 and HumM2), ruminant (Rum2Bac), canine (DG3), and avian (GFD) fecal pollution sources were assessed in 365 water samples collected from six Great Lakes Basin beach and river sites over a 15-week recreational season. Water samples were organized into groups based on defined viral and bacterial fecal indicator water quality thresholds and average log 10 host-associated genetic marker fecal score ratios were estimated to compare pollutant source inferences based on variable routine water quality monitoring practices. Eligible log 10 fecal score ratios ranged from -0.051 (F+ coliphage, GFD) to 2.08 (enterococci, Rum2Bac). Using a fecal score ratio approach, findings suggest that general fecal indicator selection for routine water quality monitoring can influence the interpretation of host-associated genetic marker measurements, in some cases, prioritizing different pollutant sources for remediation. Variable trends were also observed between Great Lake beach and river sites suggesting disparate management practices may be useful for each water type., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

Though Lake Michigan beaches in Chicago are not impacted by stormwater or wastewater outfalls, several of those beaches often exceed USEPA Beach Action Values (BAVs). We investigated the role of microbial source tracking (MST) as a complement to routine beach monitoring at Chicago beaches. In summer 2016, water samples from nine Chicago beaches were analyzed for E. coli by culture and enterococci by qPCR. A total of 195 archived samples were then tested for human (HF183/BacR287, HumM2), canine (DG3, DG37), and avian (GFD) microbial source tracking (MST) markers. Associations between MST and general fecal indicator bacteria (FIB) measures were evaluated and stratified based on wet and dry weather definitions. Among the 195 samples, HF183/BacR287 was quantifiable in 4%, HumM2 in 1%, DG3 in 6%, DG37 in 2%, and GFD in 23%. The one beach with a dog area was far more likely to have DG3 present in the quantifiable range than other beaches. Exceedance of general FIB BAVs increased the odds of human, dog and avian marker detection. MST marker weighted-average fecal scores for DG3 was 2.4 times, DG37 was 2.1 times, and GFD was 1.6 times higher during wet compared to dry weather conditions. HF183/BacR287 weighted-average fecal scores were not associated with precipitation. Associations between FIB BAV exceedance and MST marker detection were generally stronger in wet weather. Incorporating MST testing into routine beach water monitoring can provide information that beach managers can use when developing protection plans for beaches not impacted by point sources., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The authors have no financial stake in the products described or in this research. The employer of two of the authors (AS and SD), the University of Illinois at Chicago, is contracted by the Chicago Park District to conduct beach monitoring, and that monitoring is managed by those authors. The beaches managed by the Chicago Park District are the subject of the manuscript., (Copyright © 2020 The Authors. Published by Elsevier Ltd.. All rights reserved.)

There is interest in the application of rapid quantitative polymerase chain reaction (qPCR) methods for recreational freshwater quality monitoring of the fecal indicator bacteria Escherichia coli (E. coli). In this study we determined the performance of 21 laboratories in meeting proposed, standardized data quality acceptance (QA) criteria and the variability of target gene copy estimates from these laboratories in analyses of 18 shared surface water samples by a draft qPCR method developed by the U.S. Environmental Protection Agency (EPA) for E. coli. The participating laboratories ranged from academic and government laboratories with more extensive qPCR experience to "new" water quality and public health laboratories with relatively little previous experience in most cases. Failures to meet QA criteria for the method were observed in 24% of the total 376 test sample analyses. Of these failures, 39% came from two of the "new" laboratories. Likely factors contributing to QA failures included deviations in recommended procedures for the storage and preparation of reference and control materials. A master standard curve calibration model was also found to give lower overall variability in log 10 target gene copy estimates than the delta-delta Ct (ΔΔCt) calibration model used in previous EPA qPCR methods. However, differences between the mean estimates from the two models were not significant and variability between laboratories was the greatest contributor to overall method variability in either case. Study findings demonstrate the technical feasibility of multiple laboratories implementing this or other qPCR water quality monitoring methods with similar data quality acceptance criteria but suggest that additional practice and/or assistance may be valuable, even for some more generally experienced qPCR laboratories. Special attention should be placed on providing and following explicit guidance on the preparation, storage and handling of reference and control materials., (Published by Elsevier Ltd.)

Fecal contamination of recreational waters with cattle manure can pose a risk to public health due to the potential presence of various zoonotic pathogens. Fecal indicator bacteria (FIB) have a long history of use in the assessment of recreational water quality, but FIB quantification provides no information about pollution sources. Microbial source tracking (MST) markers have been developed in response to a need to identify pollution sources, yet factors that influence their decay in ambient waters are often poorly understood. We investigated the influence of water type (freshwater versus marine) and select environmental parameters (indigenous microbiota, ambient sunlight) on the decay of FIB and MST markers originating from cattle manure. Experiments were conducted in situ using a submersible aquatic mesocosm containing dialysis bags filled with a mixture of cattle manure and ambient water. Culturable FIB (E. coli, enterococci) were enumerated by membrane filtration and general fecal indicator bacteria (GenBac3, Entero1a, EC23S857) and MST markers (Rum2Bac, CowM2, CowM3) were estimated by qPCR. Water type was the most significant factor influencing decay (three-way ANOVA, p: 0.006 to <0.001), although the magnitude of the effect differed among microbial targets and over time. The presence of indigenous microbiota and exposure to sunlight were significantly correlated (three-way ANOVA, p: 0.044 to <0.001) with decay of enterococci and CowM2, while E. coli, EC23S857, Rum2Bac, and CowM3 (three-way ANOVA, p: 0.044 < 0.001) were significantly impacted by sunlight or indigenous microbiota. Results indicate extended persistence of both cultivated FIB and genetic markers in marine and freshwater water types. Findings suggest that multiple environmental stressors are important determinants of FIB and MST marker persistence, but their magnitude can vary across indicators. Selective exclusion of natural aquatic microbiota and/or sunlight typically resulted in extended survival, but the effect was minor and limited to select microbial targets., (Published by Elsevier B.V.)

There is a growing interest for the use of coliphage as an alternative indicator to assess fecal pollution in recreational waters. Coliphage are a group of viruses that infect Escherichia coli and are considered as potential surrogates to infer the likely presence of enteric viral pathogens. We report the use of a dead-end hollow fiber ultrafiltration single agar layer method to enumerate F+ and somatic coliphage from surface waters collected from three Great Lake areas. At each location, three sites (two beaches; one river) were sampled five days a week over the 2015 beach season (n = 609 total samples). In addition, culturable E. coli and enterococci concentrations, as well as 16 water quality and recreational area parameters were assessed such as rainfall, turbidity, dissolved oxygen, pH, and ultra violet absorbance. Overall, somatic coliphage levels ranged from non-detectable to 4.39 log 10 plaque forming units per liter and were consistently higher compared to F+ (non-detectable to 3.15 log 10  PFU/L), regardless of sampling site. Coliphage concentrations weakly correlated with cultivated fecal indicator bacteria levels (E. coli and enterococci) at 75% of beach sites tested in study (r = 0.28 to 0.40). In addition, ultraviolet light absorption and water temperature were closely associated with coliphage concentrations, but not fecal indicator bacteria levels suggesting different persistence trends in Great Lake waters between indicator types (bacteria versus virus). Finally, implications for coliphage water quality management and future research directions are discussed., (Published by Elsevier Ltd.)

Human fecal pollution of recreational waters remains a public health concern worldwide. As a result, there is a growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality research and management. However, there are currently no standardized approaches for field implementation and interpretation of qPCR data. In this study, a standardized HF183/BacR287 qPCR method was combined with a water sampling strategy and a novel Bayesian weighted average approach to establish a human fecal contamination score (HFS) that can be used to prioritize sampling sites for remediation based on measured human waste levels. The HFS was then used to investigate 975 study design scenarios utilizing different combinations of sites with varying sampling intensities (daily to once per week) and number of qPCR replicates per sample (2-14 replicates). Findings demonstrate that site prioritization with HFS is feasible and that both sampling intensity and number of qPCR replicates influence reliability of HFS estimates. The novel data analysis strategy presented here provides a prescribed approach for the implementation and interpretation of human-associated HF183/BacR287 qPCR data with the goal of site prioritization based on human fecal pollution levels. In addition, information is provided for future users to customize study designs for optimal HFS performance., (Published by Elsevier Ltd.)

There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria proposed in this study should help scientists, managers, reviewers, and the public evaluate the technical quality of future findings against an established benchmark., (Copyright © 2016, American Society for Microbiology. All Rights Reserved.)

Quantitative polymerase chain reaction (qPCR) has become a frequently used technique for quantifying enterococci in recreational surface waters, but there are several methodological options. Here we evaluated how three method permutations, type of mastermix, sample extract dilution and use of controls in results calculation, affect method reliability among multiple laboratories with respect to sample interference. Multiple samples from each of 22 sites representing an array of habitat types were analyzed using EPA Method 1611 and 1609 reagents with full strength and five-fold diluted extracts. The presence of interference was assessed three ways: using sample processing and PCR amplifications controls; consistency of results across extract dilutions; and relative recovery of target genes from spiked enterococci in water sample compared to control matrices with acceptable recovery defined as 50 to 200%. Method 1609, which is based on an environmental mastermix, was found to be superior to Method 1611, which is based on a universal mastermix. Method 1611 had over a 40% control assay failure rate with undiluted extracts and a 6% failure rate with diluted extracts. Method 1609 failed in only 11% and 3% of undiluted and diluted extracts analyses. Use of sample processing control assay results in the delta-delta Ct method for calculating relative target gene recoveries increased the number of acceptable recovery results. Delta-delta tended to bias recoveries from apparent partially inhibitory samples on the high side which could help in avoiding potential underestimates of enterococci--an important consideration in a public health context. Control assay and delta-delta recovery results were largely consistent across the range of habitats sampled, and among laboratories. The methodological option that best balanced acceptable estimated target gene recoveries with method sensitivity and avoidance of underestimated enterococci densities was Method 1609 without extract dilution and using the delta-delta calculation method. The applicability of this method can be extended by the analysis of diluted extracts to sites where interference is indicated but, particularly in these instances, should be confirmed by augmenting the control assays with analyses for target gene recoveries from spiked target organisms., (Published by Elsevier B.V.)

Quantitative real-time PCR (qPCR) assays that target the human-associated HF183 bacterial cluster within members of the genus Bacteroides are among the most widely used methods for the characterization of human fecal pollution in ambient surface waters. In this study, we show that a current TaqMan HF183 qPCR assay (HF183/BFDrev) routinely forms nonspecific amplification products and introduce a modified TaqMan assay (HF183/BacR287) that alleviates this problem. The performance of each qPCR assay was compared in head-to-head experiments investigating limits of detection, analytical precision, predicted hybridization to 16S rRNA gene sequences from a reference database, and relative marker concentrations in fecal and sewage samples. The performance of the modified HF183/BacR287 assay is equal to or improves upon that of the original HF183/BFDrev assay. In addition, a qPCR chemistry designed to combat amplification inhibition and a multiplexed internal amplification control are included. In light of the expanding use of PCR-based methods that rely on the detection of extremely low concentrations of DNA template, such as qPCR and digital PCR, the new TaqMan HF183/BacR287 assay should provide more accurate estimations of human-derived fecal contaminants in ambient surface waters.

Calves make up about 16% of the current bovine population in the United States and can excrete high levels of human pathogens in their feces. We describe the density and distribution of genetic markers from 9 PCR- and real-time quantitative PCR-based assays, including CF128, CF193, CowM2, CowM3, GenBac3, Entero1, EC23S857, CampF2, and ttr-6, commonly used to help assess ambient surface water quality. Each assay was tested against a collection of 381 individual bovine fecal samples representing 31 mother and calf pairings collected over a 10-month time period from time of birth through weaning. Genetic markers reported to be associated with ruminant and/or bovine fecal pollution were virtually undetected in calves for up to 115 days from birth, suggesting that physiological changes in calf ruminant function impact host-associated genetic marker shedding. In addition, general fecal indicator markers for Bacteroidales, Escherichia coli, and Enterococcus spp. exhibited three separate trends across time, indicating that these bacteria respond differently to age-related physiological and dietary changes during calf development. The results of this study suggest that currently available PCR-based water quality indicator technologies can under- or overestimate fecal pollution originating from calves and identify a need for novel calf-associated source identification methods.

Waterborne diseases represent a significant public health risk worldwide and can originate from contact with water contaminated with human fecal material. We describe a real-time quantitative PCR (qPCR) method that targets a genetic marker of the human-associated Bacteroides dorei for identification of human fecal pollution in ambient water samples. The following protocol includes water sample collection, filtration, DNA isolation with a sample processing control, qPCR amplification with an internal amplification control, and quality control data analysis.

The State of California has mandated the preparation of a guidance document on the application of fecal source identification methods for recreational water quality management. California contains the fifth highest population of cattle in the United States, making the inclusion of cow-associated methods a logical choice. Because the performance of these methods has been shown to change based on geography and/or local animal feeding practices, laboratory comparisons are needed to determine which assays are best suited for implementation. We describe the performance characterization of two end-point PCR assays (CF128 and CF193) and five real-time quantitative PCR (qPCR) assays (Rum2Bac, BacR, BacCow, CowM2, and CowM3) reported to be associated with either ruminant or cattle feces. Each assay was tested against a blinded set of 38 reference challenge filters (19 duplicate samples) containing fecal pollution from 12 different sources suspected to impact water quality. The abundance of each host-associated genetic marker was measured for qPCR-based assays in both target and non-target animals and compared to quantities of total DNA mass, wet mass of fecal material, as well as Bacteroidales, and enterococci determined by 16S rRNA qPCR and culture-based approaches (enterococci only). Ruminant- and cow-associated genetic markers were detected in all filters containing a cattle fecal source. However, some assays cross-reacted with non-target pollution sources. A large amount of variability was evident across laboratories when protocols were not fixed suggesting that protocol standardization will be necessary for widespread implementation. Finally, performance metrics indicate that the cattle-associated CowM2 qPCR method combined with either the BacR or Rum2Bac ruminant-associated methods are most suitable for implementation., (Published by Elsevier Ltd.)

The application of quantitative real-time PCR (qPCR) technologies for the rapid identification of fecal bacteria in environmental waters is being considered for use as a national water quality metric in the United States. The transition from research tool to a standardized protocol requires information on the reproducibility and sources of variation associated with qPCR methodology across laboratories. This study examines interlaboratory variability in the measurement of enterococci and Bacteroidales concentrations from standardized, spiked, and environmental sources of DNA using the Entero1a and GenBac3 qPCR methods, respectively. Comparisons are based on data generated from eight different research facilities. Special attention was placed on the influence of the DNA isolation step and effect of simplex and multiplex amplification approaches on interlaboratory variability. Results suggest that a crude lysate is sufficient for DNA isolation unless environmental samples contain substances that can inhibit qPCR amplification. No appreciable difference was observed between simplex and multiplex amplification approaches. Overall, interlaboratory variability levels remained low (<10% coefficient of variation) regardless of qPCR protocol.

DNA extracts from enumerated target organism cells (calibrator samples) have been used for estimating Enterococcus cell equivalent densities in surface waters by a comparative cycle threshold (Ct) qPCR analysis method. To compare surface water Enterococcus density estimates from different studies by this approach, either a consistent source of calibrator cells must be used or the estimates must account for any differences in target sequence recoveries from different sources of calibrator cells. In this report we describe two methods for estimating target sequence recoveries from whole cell calibrator samples based on qPCR analyses of their serially diluted DNA extracts and most probable number (MPN) calculation. The first method employed a traditional MPN calculation approach. The second method employed a Bayesian hierarchical statistical modeling approach and a Monte Carlo Markov Chain (MCMC) simulation method to account for the uncertainty in these estimates associated with different individual samples of the cell preparations, different dilutions of the DNA extracts and different qPCR analytical runs. The two methods were applied to estimate mean target sequence recoveries per cell from two different lots of a commercially available source of enumerated Enterococcus cell preparations. The mean target sequence recovery estimates (and standard errors) per cell from Lot A and B cell preparations by the Bayesian method were 22.73 (3.4) and 11.76 (2.4), respectively, when the data were adjusted for potential false positive results. Means were similar for the traditional MPN approach which cannot comparably assess uncertainty in the estimates. Cell numbers and estimates of recoverable target sequences in calibrator samples prepared from the two cell sources were also used to estimate cell equivalent and target sequence quantities recovered from surface water samples in a comparative Ct method. Our results illustrate the utility of the Bayesian method in accounting for uncertainty, the high degree of precision attainable by the MPN approach and the need to account for the differences in target sequence recoveries from different calibrator sample cell sources when they are used in the comparative Ct method., (Published by Elsevier B.V.)

Genetic markers from Bacteroides and other faecal bacteria are being tested for inclusion in regulations to quantify aquatic faecal contamination and estimate public health risk. For the method to be used quantitatively across environments, persistence and decay of markers must be understood. We measured concentrations of contaminant molecular markers targeting Enterococcus and Bacteroides spp. in marine and freshwater microcosms spiked with human sewage and exposed to either sunlight or dark treatments. We used Bayesian statistics with a delayed Chick-Watson model to estimate kinetic parameters for target decay. DNA- and RNA-based targets decayed at approximately the same rate. Molecular markers persisted (could be detected) longer in marine water. Sunlight increased the decay rates of cultured indicators more than those of molecular markers; sunlight also limited persistence of molecular markers. Within each treatment, Bacteroides markers had similar decay profiles, but some Bacteroides markers significantly differed in decay rates. The role of extracellular DNA in persistence appeared unimportant in the microcosms. Because conditions were controlled, microcosms allowed the effects of specific environmental variables on marker persistence and decay to be measured. While marker decay profiles in more complex environments would be expected to vary from those observed here, the differences we measured suggest that water matrix is an important factor affecting quantitative source tracking and microbial risk assessment applications., (© 2011 Society for Applied Microbiology and Blackwell Publishing Ltd.)

Two bacteriophages, phi6 and phi8, were investigated as potential surrogates for H5N1 highly pathogenic avian influenza virus in persistence and chlorine inactivation studies in water. In the persistence studies, phi6 and phi8 remained infectious at least as long as the H5N1 viruses at both 17 and 28 degrees C in fresh water, but results varied in salinated water. The bacteriophage phi6 also exhibited a slightly higher chlorine resistance than that of the H5N1 viruses. Based upon these findings, the bacteriophages may have potential for use as surrogates in persistence and inactivation studies in fresh water.

Cryptosporidium parvum oocysts are prevalent in surface water and ground water under the influence of surface water, and are difficult to inactivate using free chlorine, the most common disinfectant currently used for treating drinking water. In contrast, it has been shown that ozone is a more effective disinfectant than chlorine. US EPA is currently evaluating a treatment rule, which addresses the control of C. parvum oocysts in drinking water. The use of Ct (average disinfectant concentration multiplied by characteristic contact time) values is being considered as one of the options for demonstrating adequate control of this microbial contaminant. The purpose of this study is to incorporate the variability in inactivation kinetics among different lots of oocysts and to develop a statistical model for Ct based on first-order delayed Chick--Watson inactivation kinetics. A Bayesian approach is used to estimate the delayed Chick--Watson kinetic parameters. A log-linear regression analysis is then used to represent the effect of temperature on the resulting kinetic parameters. The overall model developed in this study provides an approach for water utilities and regulatory agencies to decide on the level of safety needed when developing treatment requirements for the inactivation of C. parvum oocysts with ozone as part of broader risk assessment considerations.