Search

This study investigated the treatment of wastewater from tomato paste (TP) production using electrocoagulation (EC) and electrooxidation (EO). The effectiveness of water recovery from the pretreated water was then investigated using the membrane process. For this purpose, the effects of independent control variables, including electrode type (aluminum, iron, graphite, and stainless steel), current density (25-75 A/m 2 ), and electrolysis time (15-120 min) on chemical oxygen demand (COD) and color removal were investigated. The results showed that 81.0% of COD and 100% of the color removal were achieved by EC at a current density of 75 A/m 2 , a pH of 6.84 and a reaction time of 120 min aluminum electrodes. In comparison, EO with graphite electrodes achieved 55.6% of COD and 100% of the color removal under similar conditions. The operating cost was calculated to be in the range of $0.56-30.62/m 3 . Overall, the results indicate that EO with graphite electrodes is a promising pretreatment process for the removal of various organics. In the membrane process, NP030, NP010, and NF90 membranes were used at a volume of 250 mL and 5 bar. A significant COD removal rate of 94% was achieved with the membrane. The combination of EC and the membrane process demonstrated the feasibility of water recovery from TP wastewater., Competing Interests: The authors declare there is no conflict., (© 2024 The Authors This is an Open Access article distributed under the terms of the Creative Commons Attribution Licence (CC BY 4.0), which permits copying, adaptation and redistribution, provided the original work is properly cited (http://creativecommons.org/licenses/by/4.0/).)

Bioremediation is a promising technology that can eliminate the drawbacks of conventional treatment methods in removing harmful toxic metals including chromium(VI). Therefore, in this study, fungal hyphae modified with graphite and reduced graphene oxide were synthesized and assessed for their potential to bioremediate heavy metals for the first time in the literature. The effects of the carbon-based materials on microbial structure were characterized using scanning electron microscopy analysis. Thermogravimetric, RAMAN, X-ray diffraction, and enzymatic analyzes were performed to determine the role of functional groups. In addition, batch adsorption experiments utilizing response surface methodology were conducted to optimize operating parameters such as time (1-11 h), chromium (10-50 mg/L), and graphite/reduced graphene oxide (0.1-1 g/L). The maximum adsorption capacity with the graphene fungal hyphae was determined to be 568 mg.g -1 , which is 9.7 times that of the crude fungal hyphae. The Cr(VI) removal for fungal hyphae-graphite and fungal hyphae-reduced graphene oxide biocomposites was 98.25% and 98.49%, respectively. The isothermal and kinetic results perfectly matched the 2nd order pseudo-model and Langmuir model in terms of the nature of the adsorption process. The laboratory scale test results indicate that fungal hyphae modified with graphite and reduced graphene oxide have a high adsorption capacity, suitable for the removal of chromium (VI) from wastewater.

Mining of precious metals contributes to environmental pollution, especially in coastal areas, and conventional treatment methods are not always effective in removing metal contaminants. Some of these metals, such as gadolinium, germanium and gallium, have caused increasing concern worldwide, as little is known about their current concentrations in the aquatic environment and their biological significance. Therefore, the aim of this study was to determine for the first time the variation of average G(s) concentrations (gallium, gadolinium and germanium) by month/season/site differences along the coast of Istanbul. The ecological risk index was calculated to assess the contamination of seawater and to serve as a diagnostic tool for the mitigation of water pollution. The average distribution G(s) in seawater was in the following order: Ga > Gd > Ge. In addition, the potential ecological risk in the sampling areas ranged from 68 to 1049. Of the three metals, Gd poses the highest ecological risk (grade III). In the spatial distribution of ecological risks, Gd mainly originated from discharges from wastewater treatment plants. Therefore, the sources of the anthropogenic Gd anomaly in wastewater should be identified, as this indicates the possibility of human exposure to potentially harmful anthropogenic compounds., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

This study aims to understand the influence of wastewater treatment plant discharge on the microplastic status in the surface seawater of Istanbul. For this purpose, for the first time, the distribution, composition, and ecological risk of microplastics at nine sampling stations on the southern coast of Istanbul, Marmara, were investigated at monthly intervals over a one-year period. The results showed that the microplastic abundance ranged from 0 to over 1000 particles per liter. Fibers were the dominant form at all stations. Microplastics 249-100 μm were the dominant size, and transparency was the color most found at all stations. Polyethylene and ethylene-vinyl acetate were the major types of microplastics, accounting for 50% overall. The pollution load index revealed that over 70% of sampling stations were at hazard level I. However, the hazardous index was categorized as level III with a value of 662.3 due to the presence of the most hazardous polymer named polyurethane. Further investigations into the risk assessment of MP can reveal crucial knowledge for understanding the microplastic cycle., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:, (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Wastewater treatment plants (WWTPs) are one of the major vectors of microplastics (MPs) pollution for the recipient water bodies. Therefore, the recovery of MPs from WWTPs is extremely important for decreasing their accumulation and impact in aquatic systems. In this present study, the electrocoagulation-electroflotation (EC/EF) and membrane filtration processes were investigated in removing MPs from wastewaters. The effectiveness of different electrode combinations (Fe-Al and Al-Fe), current density (10-20 A/m 2 ), pH (4.0-10.0) and operating times (0-120 min) on the removal of two different polymer particles in water were investigated to obtain maximum treatment efficiency. The effect of pressure (1-3 bar) on membrane filtration removal efficiency was also investigated. The maximum removal efficiencies were obtained as 100% for both polymer types with electrode combination of Al-Fe, initial pH of 7, current density of 20 A/m 2 and reaction time of 10 min. The membrane filtration method also displayed a 100% removal efficiency. In addition, these laboratory-scale results were compared with the one-year average data of a plant treating with real-scale membranes. The results indicated that the proposed processes supplied maximum removal efficiency (100%) compared to conventional secondary and tertiary treatment methods (2-81.6%) in the removal of microplastics.

The contamination of water with organic compounds has become an increasing concern in today's world. The cost-effective and sustainable treatment of industrial wastewaters is a major challenge. Advanced treatment techniques such as electrocoagulation-electroflotation offer economic and reliable solutions for the treatment of industrial wastewater. In this study, the electrocoagulation-electroflotation method was investigated for the simultaneous removal of chemical oxygen demand, total phosphorus, total Kjeldahl nitrogen, and color via response surface methodology. Factors such as electrode combination (Fe and Al), current density (10-20 mA/cm 2 ), pH (3.0-9.0), and electrode distance (1-3 cm) were investigated in the treatment of wastewater to obtain maximum treatment efficiency. It was determined that chemical oxygen demand, total Kjeldahl nitrogen, total phosphorus, and color removal reached up to 94.0%, 77.5%, 97.0%, and 99.0%, respectively. Treatment costs were found as $0.71 with the Al-Fe electrode combination., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Copious quantities of microplastics enter the sewage system on a daily basis, and hence wastewater treatment plants (WWTPs) could be an important source of microplastic pollution in coastal waters. Influent and effluent discharges from three WWTPs in Mersin Bay, Turkey were sampled at monthly intervals over a one-year period during 2017. When data from all WWTPs were combined, fibers constituted the dominant particle form, accounting for 69.7% of total microplastics. Although notable oscillations in microplastic particle concentrations were observed throughout the year influent waters on average contained about 2.5-fold greater concentrations of microplastics compared to the effluent waters. An average of 0.9 microplastic particles were found per liter of effluent from the three WWTPs amounting to around 180 × 10 6 particles per day to Mersin Bay. This shows that despite their ability to remove 55-97% of microplastics, WWTPs are one of the main sources of microplastics to the northeast Mediterranean Sea., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Marine pollution has been considered an increasing problem because of the increase in sea transportation day by day. Therefore, a large volume of bilge water which contains petroleum, oil and hydrocarbons in high concentrations is generated from all types of ships. In this study, treatment of bilge water by electrocoagulation/electroflotation and nanofiltration integrated process is investigated as a function of voltage, time, and initial pH with aluminum electrode as both anode and cathode. Moreover, a commercial NF270 flat-sheet membrane was also used for further purification. Box-Behnken design combined with response surface methodology was used to study the response pattern and determine the optimum conditions for maximum chemical oxygen demand (COD) removal and minimum metal ion contents of bilge water. Three independent variables, namely voltage (5-15 V), initial pH (4.5-8.0) and time (30-90 min) were transformed to coded values. The COD removal percent, UV absorbance at 254 nm, pH value (after treatment), and concentration of metal ions (Ti, As, Cu, Cr, Zn, Sr, Mo) were obtained as responses. Analysis of variance results showed that all the models were significant except for Zn (P > 0.05), because the calculated F values for these models were less than the critical F value for the considered probability (P = 0.05). The obtained R(2) and Radj(2) values signified the correlation between the experimental data and predicted responses: except for the model of Zn concentration after treatment, the high R(2) values showed the goodness of fit of the model. While the increase in the applied voltage showed negative effects, the increases in time and pH showed a positive effect on COD removal efficiency; also the most effective linear term was found as time. A positive sign of the interactive coefficients of the voltage-time and pH-time systems indicated synergistic effect on COD removal efficiency, whereas interaction between voltage and pH showed an antagonistic effect.