Search

In this communication, a novel compact high gain composite right/left-handed (CRLH) based leaky-wave antenna (LWA) is presented at Ku band. A half-mode substrate-integrated waveguide incorporated with a suitably oriented complementary quad spiral resonator (CQSR) is used to achieve a CRLH LWA. The unit cell is realised by a CQSR in such a way that the orientation of spirals exhibits higher leakage loss having a minimum cross coupling between them. The antenna is capable of scanning backward to forward along with a broadside direction in visible space. The proposed configuration has a length of 4.85λ0 which can scan within the frequency range of 13.5-17.8 GHz having a beam scanning range of 86° (-66° to 20°) and a maximum gain of 16 dBi. The simulated reflection coefficient of the proposed antenna is below -10 dB throughout the working frequency range with a side-lobe level of below -10 dB. The designed prototype is more compact in nature having high gain, fair scanning range, and good cross-polarisation level along with simpler design methodology and tuning capability to enhance the gain as well as radiation efficiency maintaining a fixed size. The proposed antenna could be a promising candidate in Ku-band applications like fixed satellite services, and broadcast satellite services etc. [ABSTRACT FROM AUTHOR]

The theoretical study and experimental results of a compact tunable left-handed (LH) zeroth order metamaterial ferrite resonator is presented. The resonator has been designed and realised using a LH coplanar waveguide transmission line on a ferrite substrate. The theoretical analysis of the operation principles of the resonator has been provided. The detailed measurement setup and experimental results are discussed. The resonator is only 0.19 λg (65% reduced in size comparing with conventional one) at 4 GHz. The resonator has fractional bandwidth of 0.1% and average insertion loss, approximately 4.5 dB. Moreover, the zeroth order metamaterial ferrite resonator has tuning capability and requires lower DC magnetic bias. [ABSTRACT FROM AUTHOR]

In this study, the authors present a novel compact non-reciprocal ferrite forward composite right-/left-handed (CRLH) coupled-line coupler (CLC). The proposed forward coupler is realised in coplanar waveguide configuration using series air gap capacitors and shunt planar segment inductors. A theoretical coupled mode analysis of a general non-ferrite CRLH forward CLC has been proposed. The mode analysis is then extended to ferrite CRLH forward CLC. The ferrite coupler's performance has been further analysed numerically and verified experimentally. Both numerical and experimental results have shown that the coupler demonstrates non-reciprocal operation for both forward coupling and through propagations. The coupler can achieve ~10 dB forward coupling and through levels with nonreciprocity isolation up to 30 dB. Moreover, the coupler has high backward coupling isolation better than 20 dB and very compact size with coupling length = 0.08 λ0 or (0.2 λg) at 8 GHz which is significantly smaller compared with any forward coupler reported to date in the similar operating frequency bands. Although, a conventional ferrite forward CLC can be non-reciprocal, it has long length, resulting in very high losses. This is not the case for the proposed CRLH coupler. Hence, the novelty and advantage of the coupler are its combined properties in compactness and nonreciprocity. Furthermore, the coupler requires very low external DC magnetic bias because of its much lower demagnetisation compared with the microstrip configuration. [ABSTRACT FROM AUTHOR]

A set of novel left-handed LH) basic block monolithic-microwave integrated-circuit (MMIC) components (transmission line, open and short stubs) are presented with applications to the RF/microwave filter and power divider. These new open and short LH MMIC resonators have compact sizes of 0.11 and 0.22 mm², respectively. The prototypes of an LH bandpass filter and LH power divider constructed from these basic components have been designed, fabricated, and characterized. The LH filter consisting of an LH transmission line and four LH open resonators exhibits transmission zeros at both sides of the passband from 1.02 to 1.42 GHz with 33.3% fractional bandwidth. The LH power divider including two LH branches shows equal power split from 2.8 to 3.72 GHz. The filter and power divider benefit from the miniaturized LH MMIC components and have compact sizes of 2.85 and 2.3 mm², respectively. Loss issues of these LH structures and, more importantly, the effect of skin depth at low frequency are investigated. Full-wave simulations for conductor thicknesses of 0.2, 1.4, and 5 μm are presented for the proposed LH MMIC components and circuits. There is a good agreement between the full-wave simulations, equivalent-circuit model, and measurement results with 1.4-μm metal thickness demonstrating the effectiveness of the models. [ABSTRACT FROM AUTHOR]