Search

In this work, the passive flow control method was applied to improve the performance of symmetrical airfoil section in the stall regime. In addition to the commonly used first law analysis, the present study utilized an entropy generation minimization method to examine the impact of the flow control method on the entropy generation characteristics around the turbine blade. This work is performed using a time-dependent CFD model of isolated NACA airfoil, which refers to the turbine blade, under sinusoidal flow boundary conditions, which emulates the actual operating conditions. Wells turbine is one of the most proper applications that can be applied by passive flow control method because it is subjected to early stall. Additionally, it consists of a number of blades that have a symmetrical airfoil section subject to the wave condition. It is deduced that with the use of passive flow control, torque coefficient of blade increases by more than 40% within stall regime and by more than 17% before the stall happens. A significantly delayed stall is also observed. [ABSTRACT FROM AUTHOR]

Wave energy has a great potential to solve the unrelenting energy deficiency in Egypt. The present work recommends Wells turbine as a suitable choice for the Egyptian coasts due to its simple and efficient operation under low input air flow. In addition, the possibility of extracting the wave energy from the Egyptian coasts was investigated using the oscillating water system based on real data from the site. To achieve this purpose, two-dimensional numerical models for Wells turbine airfoils, functioning under sinusoidal wave flow conditions, were built. Moreover, the running and starting characteristics under sinusoidal-flow conditions were investigated using a mathematical code. The results were discussed using the first law analysis, in addition to the second law analysis by using the entropy generation minimization method. It was found that the NACA0015 airfoil always gives a global entropy generation rate that is less than other airfoils by approximately −14%, −10.3% and −14.7% for the sinusoidal wave with time periods equal to 4, 6 and 8 s respectively. Moreover, the effects of blade profile, time period and solidity on the output power (kW) value were discussed. [ABSTRACT FROM AUTHOR]

In the past 20 years, the use of wave energy systems has significantly increased, generally depending on the oscillating water column concept. Wells turbine is one of the most efficient oscillating water column technologies. This article provides an updated and a comprehensive account of the state-of-the-art research on Wells turbine. Hence, it draws a roadmap for the contemporary challenges, which may hinder future reliance on such systems in the renewable energy sector. In particular, the article is concerned with the research directions and methodologies, which aim at enhancing the performance and efficiency of Wells turbine. The article also provides a thorough discussion of the use of CFD for performance modeling and design optimization of Wells turbine. It is found that a numerical model using the CFD code can be employed successfully to calculate the performance characteristics of W-T as well as other experimental and analytical methods. The increase of research papers about CFD, especially in the last 5 years, indicates that there is a trend that considerably depends on the CFD method. Copyright © 2016 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Wells turbine concept depends on utilizing the oscillating air column generated over marine waves to drive a turbine. As a matter of fact, previous researches on the performance analysis of such turbine were based on the first law of thermodynamics only. Nonetheless, the actual useful energy loss cannot be completely justified by the first law because it does not distinguish between the quantity and the quality of energy. Therefore, the present work investigates the second law efficiency and entropy generation characteristics around different blades that are used in Wells turbine under oscillating flow conditions. The work is performed by using time-dependent CFD models of different NACA airfoils under sinusoidal flow boundary conditions. Numerical investigations are carried out for the incompressible viscous flow around the blades to obtain the entropy generation due to viscous dissipation. It is found that the value of second law efficiency of the NACA0015 airfoil blade is higher by approximately 1.5% than the second law efficiency of the NACA0012, NACA0020 and NACA0021 airfoils. Furthermore, it is found that the angle of attack radically affects the second law efficiency and such effect is quantified for NACA0015 for angle of attack ranging from −15° to 25°. [ABSTRACT FROM AUTHOR]

The present work analyzes, through a rigorous numerical investigation, the entropy generation due to viscous dissipation around a Wells turbine blade. Two-dimensional numerical models for four NACA airfoils were built and validated against experimental measurements under steady flow conditions. The models were used to assess the entropy generation for flows achieving 10o angle of attack. It was found that the entropy generation around the NACA0015 airfoil blade is less by approximately 12% than the entropy generation around NACA0012, NACA0020 and NACA0021 airfoils. Then, the NACA0015 and NACA0021 airfoils were simulated under different flow conditions (i.e. Reynolds number and angle of attack). The results were discussed in the light of Wells turbine performance objectives. [ABSTRACT FROM AUTHOR]

Wells turbine is the most common type of self-rectifying air turbine employed by Oscillating Water Column (OWC) wave energy devices due to its technical simplicity, reliability, and design robustness. Because it subjected to early stall, there were many endeavors to improve the energy extraction performance of Wells turbine within the stall regime. Using the multi suction slots as a passive flow control can help obtaining a delayed stall. Two, three and four suction slots were investigated to improve the performance of Wells turbine in the stall regime. In addition the commonly used first law analysis, the present study utilized an entropy generation minimization method to examine the impact of the multi suction slots method on the entropy generation characteristics around the turbine blade. The turbine blade with optimum suction slots number and location was investigated using the oscillating water system based on the real data from the site. To achieve this purpose, two-dimension numerical models for Wells turbine airfoils under sinusoidal wave flow conditions were built and analyze using (ANSYS FLUENT) solver. It is found that the airfoil with three suction slots located at 40%, 55% and 90% from leading edge in chord percentage give the highest torque coefficient by 26.7% before the stall and 51% after the stall. [ABSTRACT FROM AUTHOR]