Search

An integrated system was tested at pilot-scale for treating polluted water from the Marriot Lake in Egypt, comprising a settling technique followed by three parallel horizontal subsurface flow constructed wetland (HFCWs) units operating under a continuous flow mode; one HFCW unit was planted with Typha angustifolia and contained a perforated pipes network for enhanced passive aeration (CWA), one unit was planted without the perforated pipe network (CWR) and one served as a Control unit (unplanted and without perforated pipes). Changes in physicochemical parameters, BOD 5 , nutrients (nitrogen, phosphorus), microbial community, and trace metals at different hydraulic retention times (HRT; 0.5-6 h) and hydraulic loading rates (HLR; 750, 1000, 1250, and 2000 L/m 2 /d) were monitored. The CWA unit had an overall better performance than the CWR unit, while both planted units outperformed the Control unit. CWA showed the highest performance at HLR of 1000 L/m 2 /d and 4-6 h-HRT with 95.3% removal for turbidity, 83% for BOD 5 , 99.3% for ammonia nitrogen (NH 4 -N), 70.8% for Total Nitrogen (TN), and 66.7% for Total Phosphorus (TP), while higher NO 3 -N and NO 2 -N effluent concentrations were observed. Trace metals levels were significantly reduced and accumulated in plant tissues. Microbial communities' densities fluctuated in the CWA unit. The integrated system with the settling stage and the planted CWA unit was proved to achieve a high removal efficiency and reached the national discharge limits, thus representing a novel nature-based solution for the sustainable remediation of polluted lake water., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Constructed wetlands (CW) are an attractive technology due to their operational simplicity and low life-cycle cost. It has been applied for refinery effluent treatment but mostly single-stage designs (e.g., vertical or horizontal flow) have been tested. However, to achieve a good treatment efficiency for industrial effluents, different treatment conditions (both aerobic and anaerobic) are needed. This means that hybrid CW systems are typically required with a respectively increased area demand. In addition, a strong aerobic environment that facilitates the formation of iron, manganese, zinc and aluminum precipitates cannot be established with passive wetland systems, while the role of these oxyhydroxide compounds in the further co-precipitation and removal of heavy metals such as copper, nickel, lead, and chromium that can simplify the overall treatment of industrial wastewaters is poorly understood in CW. Therefore, this study tests for the first time an innovative CW design that combines an artificially aerated section with a non-aerated section in a single unit applied for oil refinery wastewater treatment. Four pilot units were tested with different design (i.e., planted/unplanted, aerated/non-aerated) and operational (two different hydraulic loading rates) characteristics to estimate the role of plants and artificial aeration and to identify the optimum design configuration. The pilot units received a primary refinery effluent, i.e., after passing through a dissolved air flotation unit. The first-order removal of heavy metals under aerobic conditions is evaluated, along with the removal of phenols and nutrients. High removal rates for Fe (96-98%), Mn (38-81%), Al (49-73%), and Zn (99-100%) generally as oxyhydroxide precipitates were found, while removal of Cu (61-80%), Ni (70-85%), Pb (96-99%) and Cr (60-92%) under aerobic conditions was also observed, likely through co-precipitation. Complete phenols and ammonia nitrogen removal was also found. The first-order rate coefficient (k) calculated from the collected data demonstrates that the tested CW represents an advanced wetland design reaching higher removal rates at a smaller area demand than the common CW systems., (Copyright © 2021. Published by Elsevier Ltd.)

Cork boiling wastewaters (CBW) are strongly coloured complex aqueous solutions with high organic load of biorecalcitrant and toxic nature. The feasibility and efficiency of a CBW treatment process combining ozonation as pre- and post-treatment of a horizontal subsurface flow constructed wetland (HSFCW) was assessed. Over an extended monitoring period of 390 days, two lab-scale HSFCW units were tested; one planted with P. australis (CWP) and one unplanted-control (CWC) operated at average organic loads rates (OLR) of 5 and 10 g COD/m 2 /d. CWP always outperformed the control unit. The ozonation trials were run at pH values of 8.15-8.21 and 5.39-5.45 (without adjustment) at ozone to COD ratios of 0.25-0.29 and 0.24-0.59 when implemented as pre- and post-treatment, respectively. Average removals (calculated through mass balance basis) were 78-88%, 86-91%, 71-89% and 43-89% for COD, BOD 5 , Total Phenols (TPh) and colour when ozonation was implemented as post-treatment. For ozonation as pre-treatment, respective figures were 77-80%, 79-92%, 78-85% and 19-73%. Regardless of the treatment scheme and OLR, ozonation was very effective in biodegradability increase (i.e., BOD 5 /COD) from 0.18 to 0.42 when applied as pre-treatment, and decolourization after the HSFCW increased from 21% to 91% (post-treatment) with respective ozone consumed yields of 67-69% and 72-85%. The best results were obtained for the scheme CWP + Ozonation at OLR of 5.33 g COD/m 2 /d with COD reductions from 1950 mg/L to 81-88 mg/L in the effluent and TPh from 125 mg/L to 5-6 mg/L at limited ozone amounts of 0.21-0.45 g O 3 /m 2 /d., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Industrial wastewaters represent a serious threat to the environment due to their variable and complex composition. Though mostly mechanical systems are used for treatment of such wastewater, there is growing need for sustainable and cost-effective solutions, especially in low-income regions. In this study, a horizontal sub-surface flow Constructed Wetland (HSFCW) system was used for the first time to treat wastewater from a glass manufacturing industry in Iran. In order to de-risk the treatment approach, a pilot system consisting of a settling tank and a HSFCW was first tested for 4 months. The results of the pilot study were then used to build the full-scale CW system treating 10 m³/day. In general, the tested design proved to be very effective reaching high removal rates of BOD 5 , COD, and TSS (90, 90, and 99, respectively), as also for TN and TP (>90%). The high efficiency of the tested system allowed for the recycle and reuse of the treated effluent in the glass manufacturing processes, reducing this way the fresh water consumption in the glass industry and the related operational costs., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Tannery wastewater is characterized by high and variable concentrations of diverse pollutants, which makes it difficult and costly to treat. In the search for sustainable treatment options for tannery effluents, two pilot-scale horizontal subsurface flow (HSF) constructed wetlands (CW) were built and operated for the treatment of synthetic water of quality similar to that of pre-treated tannery effluents. Five different loading phases were examined with gradual increase of inflow COD, NH4+-N and Cr loads until reaching and exceeding the typical composition of a tannery effluent. High COD and NH4+-N removals were observed (82 and 96%, respectively), and almost complete Cr removal in the outflow, which met the Venezuela national standards for environmental discharge. Plant uptake was measured, but microbial processes appear to be the main ammonium transformation/removal mechanism. Nitrogen, chlorophyll and Cr in the plant aerial parts and roots indicated the capacity of Phragmites sp. to grow and survive even under high loads. The measured heterotrophic bacteria in the substrate and rhizomes indicated the biofilm development and the oxidation of organic matter and nitrogen. Water losses via evapotraspiration were also measured and reached 14%. Overall, the tested CW design proved to be a sustainable and feasible alternative for the treatment of tannery wastewater in tropical climates., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Aerated Constructed Wetlands are a state-of-the-art design that provides a different physical and chemical environment (compared to traditional passive wetland designs) for the wastewater treatment processes and, thus, may have different pathogen removal characteristics. In order to establish the fate of bacterial and viral indicators, a field study was carried out at a Sewage Treatment Works (STW) in the UK (serving 20,000 pe). The STW consists of primary and secondary sedimentation tanks and trickling filters (TF) as the biological stage. A large (1,160 m 2 ) pilot aerated Vertical Flow Constructed Wetland (AVFCW) was constructed at the STW as tertiary stage receiving ¼ of the total flow rate, i.e., 1250 m 3 /day. Effluent quality of the AVFCW complied with national and international standards for environmental discharge and reuse. For the first time, two sets of bacterial (Faecal coliforms, E.coli and intestinal enterococci) and viral indicators (Somatic coliphages, F-RNA specific bacteriophages and human-specific B. fragilis GB124 phages) were simultaneously investigated in an AVFCW and TF. High elimination rates were detected (up to 3.7 and 2.2 log reduction for bacteria indicators and phages, respectively) and strong correlations between the two sets were found. The superior efficiency of the aerated Constructed Wetlands in microbiological contamination removal compared to passive wetland systems was established for the first time, which may have implications for process selection for wastewater reuse. This field study therefore provides new evidence on the fate of bacteriophages and a first indication of their potential use for performance evaluation in TF and aerated Constructed Wetlands. It also demonstrates that the combination of TF with aerated constructed wetlands could be a novel and effective treatment scheme for new STW or for the upgrade of existing STW., (Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.)

The feasibility and treatment efficiency of horizontal subsurface flow constructed wetlands (HSFCW) was assessed for the first time for cork boiling wastewater (CBW) through laboratory experiments. CBW is known for its high content of phenolic compounds, complex composition of biorecalcitrant and toxic nature. Two lab-scale units, one planted with Phragmites australis (CWP) and one unplanted (CWC), were used to evaluate the removals of COD, BOD, total phenolic compounds (TPh) and decolourization over a 2.5-years monitoring period under Mediterranean climatic conditions. Seven organic and hydraulic loading rates ranging from 2.6 to 11.5 g COD/m 2 /d and 5.7-9.1 L/m 2 /d were tested under average hydraulic retention time (HRT) of 5 ± 1 days required due to the CWB limited biodegradability (i.e., BOD 5 /COD of 0.19). Average removals of the CWP exceeded those of the CWC and reached 74.6%, 91.7% and 69.1% for COD, BOD 5 and TPh, respectively, with respective mass removals rates up to 7.0, 1.7 and 0.5 (in g/m 2 /d). Decolourization was limited to 35%, since it mainly depends on physical processes rather than biodegradation. CBW concentration of nine phenolic compounds ranged from 1.2 to 38.4 mg/L (for the syringic and ellagic acids, respectively) in the raw CBW, with respective removals in the CWP unit ranging from 41.8 to 76.3%, higher than those in the control unit. Despite CBW high concentration of TPhs (average of 116.3 mg/L), the HSFCW reached organic load removals higher than those of conventional biological treatment methods., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The use of Constructed Wetlands (CWs) has been nowadays expanded from municipal to industrial and agro-industrial wastewaters. The main limitations of CWs remain the relatively high area requirements compared to mechanical treatment technologies and the potential occurrence of the clogging phenomenon. This study presents the findings of an innovative CW design where novel materials were used. Four pilot-scale CW units were designed, built and operated for two years. Each unit consisted of two compartments, the first of which (two thirds of the total unit length) contained either fine gravel (in two units) or random type high density polyethylene (HDPE) (in the other two units). This plastic media type was tested in a CW system for the first time. The second compartment of all four units contained natural zeolite. Two units (one with fine gravel and one with HDPE) were planted with common reeds, while the other two were kept unplanted. Second cheese whey was introduced into the units, which were operated under hydraulic residence times (HRT) of 2 and 4 days. After a two-year operation and monitoring period, pollutant removal rates were approximately 80%, 75% and 90% for COD, ammonium and ortho-phosphate, respectively, while temperature and HRT had no significant effect on pollutant removal. CWs containing the plastic media achieved the same removal rates as those containing gravel, despite receiving three times higher hydraulic surface loads (0.08 m/d) and four times higher organic surface loads (620 g/m 2 /d). This reveals that the use of HDPE plastic media could reduce CW surface area requirements by 75%., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Thickened wastewater activated sludge was treated in 13 pilot-scale sludge treatment wetlands of various configurations that operated continuously for three years in North Greece. Sludge was loaded for approximately 2.5 years, and the beds were left to rest for the remaining period. Three different sludge loading rates were used that represented three different population equivalents. Residual sludge stability and maturity were monitored for the last year. Sludge was regularly sampled and microbial respiration activity indices were measured via a static respiration assay. The phytotoxicity of sludge was quantified via a seed germination bioassay. Measurements of total solids, organic matter, total coliforms, pH and electrical conductivity were also made. According to microbial respiration activity measurements, the sludge end-product was classified as stable. The germination index of the final product exceeded 100% in most wetland units, while final pH values were approximately 6.5. The presence of plants positively affected the stability and maturity of the residual sludge end-product. Passive aeration did not significantly affect the quality of the residual sludge, while the addition of chromium at high concentrations hindered the sludge decomposition process. Conclusively, sludge treatment wetlands can be successfully used, not only to dewater, but also to stabilize and mature wastewater sludge after approximately a four-month resting phase., (Copyright © 2011 Elsevier Ltd. All rights reserved.)