Search

The efficiency of a rectenna varies under the influences of receiving polarization tilt angle, operating frequency, input power, and load value in different applications. Yet, no reported rectenna can realize stable efficiency when all these factors vary within a wide range. To solve this problem, an all-polarized rectenna is proposed in this article, composed of a dual-input rectifier and a dual-polarized (DP) antenna. By introducing a novel six-port coupler, the rectifier maintains stable efficiency at wideband, wide input power, and dc load ranges. Moreover, the efficiency of the rectifier keeps stable when the antenna receives power at different polarization tilt angles. Accordingly, a DP antenna with extended bandwidth and 3-dB beamwidth is implemented. Finally, the rectenna is formed. The prototype can maintain beyond 70% of the peak efficiency from 1.7 to 2.5 GHz. At a power density as low as 1 μW/cm2, efficiency can reach 24.4%. Furtherly, the rectenna is demonstrated by forming a battery-less digital clock. The clock can be powered wirelessly by a WiFi router or cellular base station with maximum distances of 1 or 70 m respectively. Besides, the clock can successfully function under significant transmitting-direction deviation or polarization misalignment between the power source and the rectenna. [ABSTRACT FROM AUTHOR]

The state-of-the-art phased array-based digital beamforming systems suffer from disadvantages of high power consumption, high cost, and system complexity due to the massive use of transmitter/receiver (T/R) modules and high-speed digital and digital–analog mixed devices. In this paper, we point out that by proposing a new concept “complex domain” radio frequency (RF) frontend, the relatively slowly changed waveform delay information required to accomplish adaptive beamforming can be separated from wideband RF signals, based on which a self-contained beamforming system can be implemented with a low-speed baseband. By introducing vector RF multipliers in the proposed frontend, the amplitude and phase of RF signals can be simultaneously controlled by the real and imaginary parts of complex numbers, such that beamforming algorithms derived in complex domain can be directly applied without any form of transformation. By doing so, the massive use of conventional T/R modules and high-speed baseband devices can be avoided. Theoretical analysis and experimental demonstration based on commercial components have validated the proposed approach. Our method is able to significantly simplify the realization and decrease the cost of wideband digital beamforming systems, and can be widely used in low cost, power efficient beamforming applications. [ABSTRACT FROM AUTHOR]