Search

The issues reported in this article concern the development of methods applied for measurement, processing, and analysis of infrasound signals generated in association with the operation of wind farms. In particular, the discussion involves the results of the analysis using synchrosqueezed wavelet transforms of infrasound noise emitted by a 2 MW wind turbine that have been recorded during its operation in actual conditions. To record infrasound signals, a wireless measurement system was used, consisting of a base station and three synchronized mobile recording stations. To identify the wavelet structures with the highest ratio of energy, the synchrosqueezed wavelet transforms were used, and the courses of six time runs representing instantaneous frequencies were determined. Application of this approach enables the selection of energy-dominant waveforms from the time-frequency images, whose assessment can be performed mainly in terms of qualitative measures. Application of the synchrosqueezed wavelet transform is an effective tool for the purposes of detection and selection in the designated wavelet structures for the recorded infrasound dominant frequencies for which the carried energy ranges have the highest value. [ABSTRACT FROM AUTHOR]

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The research reported in this paper involves the development and refinement of methods applicable to the measurement and analysis of infrasound signals generated by the operation of wind turbines. In particular, the presentation focuses on the use of a new system that is applied for simultaneous recording of acoustic signals in the low-frequency range emitted by wind farms in three independent and identical measurement setups. A comparative analysis of the proposed new system was made with the Brüel & Kjaer measurement, a commonly used methodology, which meets the requirements of the IEC 61400-11 standard. The paper focuses on the results of frequency and time-frequency analysis of infrasound signals recorded throughout the operation of a wind turbine with a rated capacity of 2 MW. The use of a correlated system with three simultaneous measurement systems can be a new and alternative measurement method that will eliminate the drawbacks of previous approaches. [ABSTRACT FROM AUTHOR]