Search

The double-sided tubular linear machine (DSTLM) has a more compact structure than general single-sided motors, resulting in a higher power density, typically at the cost of a higher cogging force. To reduce this aspect and make it more suitable for applications in wave energy conversion systems or elevator driver systems, a new tooth-cutting topology is proposed in this article. The Schwarz–Christoffel mapping method is used to model and analyze the magnetic field and cogging force of the DSTLM. Based on the analytical model and the relationships between the cutting dimensions and the force performances, optimization is carried out by using a differential evolution algorithm. The optimization and the experiment results show that the proposed tooth-cutting topology can effectively reduce the cogging force at the small cost of weakening average thrust. [ABSTRACT FROM AUTHOR]

Phase-shift or pole-shift method can reduce the detent force of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) dramatically. However, this method causes a decrease in thrust and an increase in normal force simultaneously. To overcome this drawback, a novel slot-shift structure whose slots on the two sides of the primary component are staggered by an optimal distance is proposed in this paper. The models of the detent force including the end force and cogging force is established theoretically, and then verified by finite element analysis. The windings in the upper primary and the lower primary are arranged differently to improve the average thrust. The thrust characteristics of the DS-PMLSM under different shifted distances are analyzed and compared in detail. Furthermore, the primary component employing two kinds of core laminations is proposed to reduce both the dc component and ripple of the normal force. Finally, a DS-PMLSM prototype is tested, and the experimental results are compared with the analytical results to verify the effectiveness of the theoretical and simulation research. [ABSTRACT FROM AUTHOR]

In this paper, two novel double-sided hybrid-excitation flux-reversal linear motors (DSHEFRLM) with the surface (S-) and interior (I-) permanent-magnet(PM) arrangements are proposed and comparatively investigated. The proposed motors feature an asymmetrical double-sided primary configuration which enables the armature and field excitations to be placed separately. Through 2-D finite-element method (FEM), two motor structures with different slot/pole combinations are optimized, and then, the magnetic fields and electromagnetic performances are calculated, including inductances, no-load flux linkage, thrust characteristics, and PM demagnetization capability. By comparison, it is found that S-DSHEFRLMs show larger thrust density while I-DSHEFRLMs exhibit superior flux-adjusting capability. Finally, these predicted results are validated by 3-D FEM. [ABSTRACT FROM AUTHOR]

Traditionally, straggering the primaries of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) is beneficial in helping to reduce the detent force caused by the longitudinal end effect, but leading to a reduction of the average thrust. To overcome this disadvantage, this paper provides a novel DS-PMLSM, which adopts the structure of staggering two primaries and rearranging windings. First, the characteristics of the voltage and detent force are analyzed theoretically and verified by finite element (FEM) simulations. The inductance, thrust, and normal forces are then compared with the traditional DS-PMLSM. Furthermore, the geometrical parameters are optimized to improve the thrust. Finally, one DS-PMLSM prototype is tested. The detent force and back electromotive force tested results verify the effectiveness of the topology proposed in this research. [ABSTRACT FROM AUTHOR]

In this paper, the design and development of a double-sided air-cored tubular generator (DSTG) is presented. The characteristics of air-cored slot-less structures are investigated in terms of power density and efficiency. This is highly desirable for small- and medium-sized renewable energy conversion systems. In this paper, an analytical tool based on the magnetic vector potential method is built in order to achieve a fast but accurate method by which the machine is analyzed. The analytical model is validated by finite-element (FE) analysis. Further design improvements based on the analytical and FE models are then suggested in order to enhance the performance of the DSTG. The final design of the DSTG is validated by the test results from a developed prototype of the DSTG. [ABSTRACT FROM AUTHOR]