Search

The dual-stator winding induction generator (DWIG) is an alternative main generator in a variable frequency ac power system. So far, the existing studies have not covered the issue of DWIGs excitation controllability, which is a matter of importance for airworthiness. In this article, we develop an impedance-based modeling and analysis technique to investigate DWIGs excitation controllability. Two related topics are presented: the spontaneous self-excitation analysis in uncontrolled system and the implicit internal self-excitation pattern analysis in actively controlled system. In the topic about spontaneous self-excitation, a virtual impulse source technique is developed to derive the impedance-based method properly in the analysis for uncontrolled DWIG. In the second topic, the analysis performed in the presence of a closed-loop controller figures out the same underlying mechanism in both the plant's open-loop stability and the spontaneous self-excitation. The experimental results verify the proposed analysis and techniques that benefit the comprehensive understanding and practical application of DWIG-based power system. [ABSTRACT FROM AUTHOR]

A novel 24/17-pole 3-phase stator wound field flux switching (SWFFS) machine with the combination of overlapping armature winding (OAW) and asymmetric stator poles (ASP) is proposed for higher torque density in this article. First, the air-gap modulation principle of the 24/17-pole OAW-SWFFS machine is analyzed to better understand its torque production mechanism. Second, since the torque capacity will be greatly restricted by the serious magnetic saturation which is introduced by the OAW configuration, two effective measures are proposed from two perspectives in this article to solve this problem. The first measure is to reduce the magnetic saturation directly by optimizing the area ratio of armature slot and excitation slot, and thus, the torque density can be improved effectively. The second measure is to further enhance the open circuit flux linkages, back electromotive force (EMF), and thus, the torque density by adopting the proposed ASP structure. Furthermore, the accurate ASP distances which are corresponding to the largest back EMF can be obtained effectively based on the air-gap field modulation theory. Finally, the proposed design is validated experimentally by a prototype machine. The simulated and experimental results show that about 25.7% higher torque density can be obtained when compared with 24/14-pole SWFFS machine. [ABSTRACT FROM AUTHOR]

The general rules of rotor pole and armature winding configurations combinations for 24-slot stator wound field flux switching machines (SWFFSMs) are investigated thoroughly in this article. Meanwhile, based on the virtual coil method, a novel general auxiliary evaluation variable, which is proportional to the fundamental amplitude of open-circuit flux-linkage of armature coil is proposed in this article. Hence, these SWFFSMs with larger open-circuit flux-linkage and back-EMF can be obtained effectively. In addition, the effect of rotor poles on the complementarity of armature windings is analyzed so that more sinusoidal and symmetrical back-EMF can be acquired. Furthermore, for these SWFFSMs with larger open-circuit back-EMF, the torque capability is restricted to a considerable extent due to the deep magnetic saturation caused by overlapping armature winding. Hence, a new method by optimizing the ratio of armature slot area and excitation slot area is proposed in this article to ensure that the higher torque density of selected SWFFSMs can be maintained. To verify the validity of analysis and methodology proposed in this article, seven representative SWFFSMs are chosen for verification at no load by the finite-element analysis (FEA) while a 24s/17p SWFFSM with the highest torque density is chosen for further verification at on-load conditions by the FEA and experiments. [ABSTRACT FROM AUTHOR]

In this article, we present a closed-loop dynamic control scheme for a dual-stator winding induction generator (DWIG) with selective harmonic elimination pulsewidth modulation (SHEPWM). This control scheme can be applied in a variable-frequency ac power system based on the DWIG, which is able to operate in low-carrier-ratio conditions, especially in high-power aeroapplications. Common closed-loop induction machine control schemes, such as vector control strategy, generally lead to control failure with SHEPWM implemented. This proposed closed-loop dynamic control scheme makes the dynamic operation of the DWIG power system feasible with SHEPWM. The scheme consists of three main parts: the complex-signal observer for DWIG, outer loop controller for DWIG, and stator flux-linkage trajectory tracking controller. The complex-signal observer provides the extra steady-state components of control signals by using the complex coefficient filter. The outer loop controller provides the dynamic commands for control signals. Finally, the flux-linkage trajectory tracking control (FTTC) synthesizes these signals and serves as the inner loop. The simulation and experimental results verify the validity and effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

In this article, we present a dual-stator structure-parallel fault-tolerant machine (DSSPFTM). In this machine, the radial-flux dual-stator structure with a higher density is adopted to the fault-tolerant system. For better performance in fault condition, the combination of permanent-magnet component (PMC) and reluctance component (RC) in the rotor and large-opening slot is proposed. Because of the same poles and torque-variation principle, the PMC and RC are combined. The PMC is devised to supply most of the torque in normal conditions, while the RC provides enough self-inductance for limiting current under short-circuit (SC) occasion. Most of the flux leakage is separated from the active flux and the overload ability is improved. The design process of DSSPFTM is described in steps and details. Based on the fundamental of maximum torque under normal conditions, PMC and RC are integrated together. The end flux leakage originating from the adjacency of RC to PMC and the effect of RC length on torque are analyzed. The back-EMF, torque, inductance, loss, efficiency, and SC analysis are demonstrated. The stress and deformation distribution of the rotor and the comparison with the traditional structure are conducted. A prototype DSSPFTM is designed and manufactured. The experiments accord with simulations, indicating that the DSSPFTM with fault tolerance can improve the torque density effectively. [ABSTRACT FROM AUTHOR]

This article presents the optimal design of a dual-stator permanent magnet fault-tolerant machine (DSPMFTM). In order to enhance the torque density, the radial-flux dual-stator structure is expanded to redundant situation. The parallel rotor is proposed to add self-inductance for realizing limited short-circuit current, and thus, the deep and narrow notches (DNNs) are replaced with large-opening slots. The optimal design of DSPMFTM is raised in this article because of the more complexity of flux coming from the short distance between the reluctance part (RP) and the permanent magnet part (PMP). The influences of slot opening, separating distance between PMP and RP along with permanent-magnet shape, are considered. Also, the varieties of torque density, ratio of mutual inductance to self-inductance, and short-circuit current to rated value are examined. A prototype is designed and manufactured according to the optimization results. The experimental results are coincident with the simulations, indicating that the DSPMFTM has a better performance in torque density and fault tolerance. [ABSTRACT FROM AUTHOR]

Owing to high driving power, good controllability, and strong fault-tolerant ability, a three-phase open-end winding permanent magnet synchronous motor driven by a dual inverter with common dc bus is considered as a competitive solution. However, a path for zero-sequence current is provided in this drive topology. Thus, the system loss would be increased, and the maximum output power is limited. In order to suppress the zero-sequence current, a novel space vector pulsewidth modulation (SVPWM) strategy based on the hysteresis controller of zero-sequence current is proposed in this paper. The voltage vectors, whose polarity of zero-sequence voltages (ZSVs) is opposite with the polarity of zero-sequence current, are selected as the basic voltage vectors of SVPWM for fundamental plane. Meanwhile, the linear modulation range is analyzed. According to the analysis results, the proposed strategy has the advantage of wide linear modulation range of ZSV under the condition of high fundamental modulation ratio. The experimental results show that the zero-sequence current is effectively suppressed by the proposed modulation strategy. Furthermore, the comparative evaluation of the proposed modulation strategy, the conventional SVPWM, the SVPWM with zero ZSVs, and the zero vector redistribution SVPWM with zero-sequence current proportional-resonant controller is conducted to demonstrate the superiority of the proposed strategy. [ABSTRACT FROM AUTHOR]

Dual stator-winding induction generator (DWIG) is attractive in stand-alone power systems, and the aim of this paper is to develop the dc generating system of five-phase DWIG with an open phase. First, the relationship between flux and torque is constructed based on the reduced-order transformation, modified flux, and current. Second, the relation between modified voltage and current on the dq plane is constructed. The current of fundamental plane is used for the control loop of the power-winding voltage and control-winding voltage, respectively. Third, the current of the modified secondary subspace plane is used to control the five-phase DWIG operation at minimum control-winding loss. Finally, the simulation and experimental results are given to verify that the amplitude of phase current and output voltage can be regulated effectively by the proposed control strategy. [ABSTRACT FROM AUTHOR]

To improve the power factor and reliability for medium/high-power supply, a three-phase single-stage ac–dc converter based on magnetic-combination transformer with power factor correction (PFC) function is presented in this paper. According to the three-phase instantaneous power balance principle and the concept of the magnetic-flux superposition, a novel magnetic-combination transformer is proposed, which can make three-phase symmetrically and sinusoidally fluctuant power add to be constant. Therefore, the induced voltage of the secondary winding is constant. To realize sinusoidally fluctuant power in the input stage, dc-link filter capacitance can be reduced to a several-microfarad level. Single-stage PFC function, no electrolytic capacitor, and constant output voltage can be realized in the converter. The principle and the structure of the novel magnetic-combination transformer are analyzed in detail in this paper. Simulation and experimental results are presented to verify the feasibility of the proposed converter. [ABSTRACT FROM AUTHOR]

This paper presents a single-phase to three-phase adjustable-speed drive (ASD) system, which consists of a diode rectifier and a single-stage boost inverter without electrolytic capacitors (E-caps). The system has no shoot-through issues and gains high reliability due to the shoot-through zero-state regulation method. By using electrolytic capacitors-less topology, the lifetime can be greatly increased. By properly designing the tapping position of the inductor, the system has a high boost-inversion gain and can ride through grid voltage sags. By using the proposed harmonic injection method, the system can realize high input power factor and small dc-link ripple voltage, simultaneously. Experimental results of the electrolytic capacitors-less single-stage boost inverter (E-caps-less SSBI) based single-phase to three-phase ASD system are obtained to verify the actual performances. [ABSTRACT FROM AUTHOR]

To improve reliability and realize electric isolation, an integrated topology of the charger and drive for medium/high-power electric buses is presented in this paper. The proposed integrated topology can solve the voltage matching problem between the power grid and the battery voltage and between the battery voltage and the drive system. The integration can be realized by using the common hardware of the charging system and the drive system, which can reduce the cost and weight of the whole system. To improve the power level, a three-phase combined full-bridge converter based on the magnetic-combination transformer is adopted in the charging system, which has a single-stage power-factor-correction function, electric isolation, and no electrolytic capacitor. To better reflect the integration, the motor drive system adopts a single-stage boost dual-inverter that is the reconfiguration of the magnetic-combination transformer and the 3-H bridge converter in the charging system and few extra components. The drive system has a single-stage boost/buck function, high reliability, and strong fault-tolerant ability. The proposed integrated topology, which can realize a charging function and a driving function, has been analyzed in this paper. Finally, the experimental results verify the feasibility of the integrated topology. [ABSTRACT FROM PUBLISHER]

In this paper, a new electric drive system based on a six-phase ten-pole dual-winding fault-tolerant permanent-magnet (DFPM) motor for aerospace applications is proposed and investigated. The proposed DFPM motor consists of optimal surface-mounted permanent-magnet (PM) rotor and 12-slot stator with two sets of independent three-phase concentrated armature windings on alternate teeth, which incorporates the merits of high power density and high efficiency of the PM motor and high fault tolerance of the dual-winding motor. To achieve the fault-tolerant performance of the electric drive system, the redundant fault-tolerant control strategy based on the failure diagnosis and redundancy communication is proposed and applied to the electric drive system. Then, the operational performance of the drive system under open-circuit and short-circuit fault has been verified by simulation and experiments. The research results show that the open-circuit and short-circuit fault can be detected immediately and the output performance of the DFPM motor under fault conditions is almost the same as the normal condition, which verified the proposed electric drive system, DFPM motor, and fault-tolerant control strategy. [ABSTRACT FROM PUBLISHER]

This paper proposes a new electric drive helicopter winch system based on a dual-winding fault-tolerant permanent magnet (DFPM) machine. The proposed DFPM machine consists of an optimal surface-mounted PM rotor and a 12 slots stator with two sets of independent three-phase concentrated armature windings on alternate teeth. Hence, it incorporates the merits of high-power density and high efficiency of a PM machine and high fault-tolerance of a dual-winding machine. To achieve the fault-tolerant performance, the redundant fault-tolerant control strategy based on speed, current, voltage two-way (electric and braking) control is proposed and analyzed first. Then, the electromagnetic performances of the DFPM machine drive system at two open-circuit fault conditions, namely, load hoisting and dropping operation mode, have been verified by experiments. The experimental results show the effectiveness of the proposed fault-tolerant control strategy and the high performance of the fault-tolerant characteristic of the proposed DFPM machine drive. [ABSTRACT FROM AUTHOR]

This paper presents an optimal scheme of excitation capacitor to decrease the capacity of static excitation controller (SEC) for dual stator-winding induction generator (DWIG) system applied in wind power generation. The investigations into reactive excitation power released by the excitation capacitor and SEC illustrate that the optimal excitation capacitor is not only related to generator parameters, speed range, and load, but also affected by wind turbine power curve. Based on the objective of minimizing the capacity of SEC, several methods are employed here to select an appropriate excitation capacitor. Through the analysis of DWIG control mechanism and model of SEC in the stator-voltage-orientation synchronous d– q frame, a decoupling control strategy using the space vector modulation is obtained. On the basis of this, the simulation and experimental works from the prototype of 18-kW six/three-phase DWIG wind power system are carried out to verify the optimal scheme. The results demonstrate the correctness and effectiveness of this optimization scheme. [ABSTRACT FROM PUBLISHER]

This letter proposes an integrated ac and dc hybrid generation system based on the dual-stator-winding induction generator with the static excitation controller (SEC). In this generator, not only the power winding can output the variable-frequency ac power, but also the control winding can provide the high-voltage dc power through the dc bus of the SEC, which implements the electric integration by only one generator. An instantaneous slip frequency control strategy is employed to guarantee the system a good performance. The experimental results verify the correctness and effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

In order to adapt to the single power supply system of an aircraft, this paper proposes and investigates a novel dual-winding fault-tolerant (DF) motor drive system based on the redundancy bridge arm for aerospace applications. The proposed DF motor offers the advantages of magnetic isolation, physics isolation, thermal isolation, and small cogging torque ripple, inhibiting the short-circuit current and high fault tolerance. The proposed DF motor drive can adapt to the single power supply system of the aircraft, reduce the drive cost, and reduce the number of independent power sources and power switches. In addition, it can improve the power density, the reliability, and the utilization rate of the drive. At the same time, the drive system has stronger fault-tolerant ability, and it can achieve the fault-tolerant control for a one-phase-winding fault or a multiphase-winding fault. To realize the short-circuit fault diagnosis performance, the diagnosis and processing method of the short-circuit fault has been investigated. Then, to realize the short-circuit fault-tolerant performance, a novel space vector pulsewidth modulation (SVPWM) fault-tolerant control strategy based on the short-circuit fault diagnosis and processing method is proposed. Finally, the performances of the DF motor drive have been verified by experiments. The research results verify the reliability and effectiveness of the proposed DF motor drive system based on the redundancy bridge arm and the SVPWM fault-tolerant control strategy. [ABSTRACT FROM AUTHOR]

In this paper, the five-phase dual stator-winding induction generator dc generating system with the static excitation controller is presented, and two kinds of control strategies for this system are proposed. In this generator, the cage-type rotor is employed, and two sets of five-phase windings are placed in the stator, namely, the power winding and control winding. Using the instantaneous power theory, the control-winding-flux-oriented control (CWFOC) strategy without harmonic injection is obtained. To improve power density, the CWFOC with harmonic injection is proposed as well. For these two strategies, the detailed implementation is studied. The results (simulation and experiment) support the correctness and effectiveness of the proposed control strategies, and the corresponding results show that, using the CWFOC strategy with harmonic injection, the output power of this system can be improved by about 11%. [ABSTRACT FROM PUBLISHER]

In this paper, the performance of the dual stator-winding induction generator (DWIG) variable frequency ac (VFAC) generating system with unbalanced loads is analyzed, and an asymmetrical operation analysis method based on a three-port load network model is proposed. This method has four key steps: (1) deriving the three-port load network model for three-phase four-line unbalanced loads; (2) establishing the positive sequence, negative sequence, and zero sequence equivalent circuits for the DWIG; (3) combining the above model and circuits together to obtain the system whole equivalent model; and (4) writing the corresponding equations and solving them. The experimental results and the calculation results are almost consistent, which proves that the proposed method is correct and valid, and the DWIG VFAC generating system with unbalanced loads has a good performance. [ABSTRACT FROM PUBLISHER]