Search

This article proposes and presents an innovative approach to realizing the concurrent dual-band transmission with only a single front-end and local oscillator at radio frequency (RF). Fundamentally, the proposed concurrent dual-band front-end is based on the conventional multiport interferometric architecture for single-band operation. Nevertheless, the conventional variable loads are replaced by diode networks with IF input signals to produce the RF signals at their designated center frequencies. Furthermore, due to the linear characteristics of a multiport network, the signals with different data contents will be mixed into both RF channels. To this end, an inverse matrix operation is applied to reversely convert the original data streams before the modulations of IF input signals. As a result, the two original data streams can be effectively modulated into specific RF channels (for transmission) with minimal interchannel interferences based on this configuration. In addition to the theoretical analyses, this innovative concurrent dual-band transmitting front-end has been investigated and verified with $M$ -quadrature amplitude modulation (QAM) signals in simulations and experiments. All outcomes demonstrate excellent performances in concurrent dual-band transmission with significant reductions in both size and biasing power. [ABSTRACT FROM AUTHOR]

This article presents a compact, low-power, yet efficient wireless sensing platform to detect the angular displacement of an object with a reoriented complementary split-ring resonator (RCSRR). This RCSRR sensor belongs to the CSRR family, consisting of a 90° feedline on the stator and slots on the rotor. The reflected signal of the sensor experiences a monolithic phase response to the angular displacement because of its asymmetricity. In the platform, the sensor acts as a variable load of the multiport interferometer. The multiport converts the reflected signal into dc voltage readouts representing the real and imaginary parts of the phase of the reflection coefficient. Moreover, this platform operates at a fixed frequency (i.e., 2.4 GHz), and it requires only a biasing power as low as −30 dBm. This platform prevents ponderous system architecture and power consumption. This innovative wireless sensing platform has been designed, implemented, and tested. The experimental results show good agreement with their theoretical counterparts, and the standard deviation of angular displacement uncertainty is only $10^\prime $. [ABSTRACT FROM AUTHOR]

This paper presents the concept and demonstration of harmonic diversity for wireless communication, which makes use of multiple harmonic radio frequency (RF) channels with respect to the carrier frequency. Rather than frequency and space diversities widely used today to improve multipath fading, signal quality and spectral efficiency, the proposed scheme does not require multiple RF transceiver front-ends. The advantages of inherent RF device nonlinear characteristics are harnessed to produce and process harmonics within single transceiver. Even though distinct harmonic channels will exhibit different order of phase shifts, the analysis shows that such phase offsets can be compensated by adjusting the phase of local oscillator (LO) at receiver end. Extending the framework of the Shannon theorem, an M-channel harmonic communication system is shown to reduce the minimum required signal-to-noise ratio (SNR) at the input of receiver by M-times. In addition, this work indicates that the power consumption of transmitter can be significantly reduced up to 66% than the conventional ones. Through the analysis of channel capacity, the harmonic system is proved to outperform the single channel counterpart especially when SNR is low. To validate the correctness of the proposed concept, a series of experiments are carried out to emulate the developed theoretical models. For instance, a three-channel harmonic communication system is prototyped, involving certain RF harmonic components designed for demonstration. The retrieved signal strengths are examined with different phase setting of receiving LO, and various modulation techniques are applied for estimating the system performances. All measured results are in agreement with their simulated counterparts, thereby demonstrating the correctness and usefulness of the proposed theories and techniques for nonlinear communication systems of harmonic diversity. [ABSTRACT FROM PUBLISHER]

A microstrip balun-bandpass filter (BPF) using capacitively loaded square-loop dual-mode resonator is proposed; it realizes not only simultaneous size reduction and spurious response suppression in filtering but also overall good differential performance of the balun. The phase and amplitude imbalance improvements due to the loaded resonator are also studied and verified by a prototype balun-BPF operated at 2.55 GHz with 3.5% fractional bandwidth. The experimental results reveal that size reduction of 47% and spurious suppressions of 30 dB beyond 1.5 f 0 are achieved as compared to that of the conventional structure. The loading effect of the prototype balun-BPF reports 180.8^\circ and 0.97 dB as phase and amplitude imbalances at the operating frequency respectively. [ABSTRACT FROM PUBLISHER]