Search

Using reconfigurable intelligent surfaces (RISs) to improve the coverage and the data rate of future wireless networks is a viable option. These surfaces are constituted of a significant number of passive and nearly passive components that interact with incident signals in a smart way, such as by reflecting them, to increase the wireless system's performance as a result of which the notion of a smart radio environment comes to fruition. In this survey, a study review of RIS‐assisted wireless communication is supplied starting with the principles of RIS which include the hardware architecture, the control mechanisms, and the discussions of previously held views about the channel model and pathloss; then the performance analysis considering different performance parameters, analytical approaches and metrics are presented to describe the RIS‐assisted wireless network performance improvements. Despite its enormous promise, RIS confronts new hurdles in integrating into wireless networks efficiently due to its passive nature. Consequently, the channel estimation for, both full and nearly passive RIS and the RIS deployments are compared under various wireless communication models and for single and multi‐users. Lastly, the challenges and potential future study areas for the RIS aided wireless communication systems are proposed. [ABSTRACT FROM AUTHOR]

A study of the behavior of NB-IoT wireless communication in an industrial indoor environment was conducted in this paper. With Wireless Insite software, a scenario in the industrial sector was simulated and modeled. Our research examined how this scenario or environment affected the communication parameters of NB-IoT's physical layer. In this context, throughput levels among terminals as well as between terminals and transceiver towers, the power received at signal destination points, signal-to-noise ratios (SNRs) in the environment, and distances between terminals and transceivers are considered. These simulated results are also compared with the calculated or theoretical values of these parameters. The results show the effect of the industrial setting on wireless communication. The differences between the theoretical and simulated values are also established. [ABSTRACT FROM AUTHOR]

Providing higher data rate is a momentous goal for wireless communications systems, while interference is an important obstacle to reach this purpose. To cope with this problem, interference alignment (IA) has been proposed. In this paper, we propose two rank minimization methods to enhance the performance of IA in the presence of uncoordinated interference, i.e., interference that cannot be properly aligned with the rest of the network and thus is a crucial issue. In this scenario, perfect and imperfect channel state information (CSI) cases are considered. Our proposed approaches employ the $l_{2}$ and the Schatten- $p$ norms to approximate the rank function, due to its non-convexity. Also, we propose a new convex relaxation to expand the feasible set of our optimization problem, providing lower rank solutions compared to other IA methods from the literature. In addition, we propose a modified weighted-sum method to deal with interference in the relay-aided MIMO interference channel, which employs a set of weighting parameters in order to find more solutions. [ABSTRACT FROM AUTHOR]

Wireless networks are undergoing a transition from connecting people to connecting things, which will allow human interaction with the physical world in a real-time fashion, for example, Tactile Internet, industrial automation, self-driving vehicles, and remote surgery. Therefore, future wireless networks need to support real-time control since it is the essential function enabling such emerging applications. In this article, some fundamental design capabilities needed to realize real-time control in future wireless networks are discussed, with primary emphasis given to communication- control because both communication and control systems have strong dynamics and interdependencies, and they tightly interact with each other. A case study is provided to demonstrate the necessity of such co-design. [ABSTRACT FROM AUTHOR]

The homogeneous spatial Poisson point process (SPPP) is widely used for spatial modeling of mobile terminals (MTs). This process is characterized by a homogeneous distribution, complete spatial independence, and constant intensity measure. However, it is intuitive to understand that the locations of MTs are neither homogeneous, due to inhomogeneous terrain, nor independent, due to homophilic relations. Moreover, the intensity is not constant due to mobility. Therefore, assuming an SPPP for spatial modeling is too simplistic, especially for modeling realistic emerging device-centric frameworks such as device-to-device (D2D) communication. In this paper, assuming inhomogeneity, positive spatial correlation, and random intensity measure, we propose a doubly stochastic Poisson process, a generalization of the homogeneous SPPP, to model D2D communication. To this end, we assume a permanental Cox process (PCP) and propose a novel Euler-Characteristic-based approach to approximate the nearest-neighbor distribution function. We also propose a threshold and spatial distances from an excursion set of a chi-square random field as interference control parameters for different cluster sizes. The spatial distance of the clusters is incorporated into a Laplace functional of a PCP to analyze the average coverage probability of a cellular user. A closed-form approximation of the spatial summary statistics is in good agreement with empirical results, and its comparison with an SPPP authenticates the correlation modeling of D2D nodes. [ABSTRACT FROM AUTHOR]

Due to the use of an appropriately designed pulse shaping prototype filter, filter bank multicarrier (FBMC) system can achieve low out of band (OoB) emissions and is also robust to the channel and synchronization errors. However, it comes at a cost of long filter tails, which may reduce the spectral efficiency significantly when the block size is small. Filter output truncation (FOT) can reduce the overhead by discarding the filter tails but may also significantly destroy the orthogonality of FBMC system, by introducing intercarrier interference (ICI) and intersymbol interference (ISI) terms in the received signal. As a result, the signal-to-interference ratio (SIR) is degraded. In addition, the presence of intrinsic interference terms in FBMC also proves to be an obstacle in combining multiple-input multiple-output (MIMO) with FBMC. In this paper, we present a theoretical analysis on the effect of FOT in an MIMO-FBMC system. First, we derive the matrix model of MIMO-FBMC system, which is subsequently used to analyze the impact of finite filter length and FOT on the system performance. The analysis reveals that FOT can avoid the overhead in the time domain but also introduces extra interference in the received symbols. To combat the interference terms, we then propose a compensation algorithm that considers odd and even overlapping factors as two separate cases, where the signals are interfered by the truncation in different ways. The general form of the compensation algorithm can compensate all the symbols in a MIMO-FBMC block and can improve the SIR values of each symbol for better detection at the receiver. It is also shown that the proposed algorithm requires no overhead and can still achieve a comparable bit error rate (BER) performance to the case with no filter truncation. [ABSTRACT FROM AUTHOR]

The homogeneous Poisson point process is widely used to model spatial distribution of base stations and mobile terminals. The same process can be used to model underlay device-to-device (D2D) network; however, neglecting homophilic relation for D2D pairing presents underestimated system insights. In this paper, we model both spatial and social distributions of interfering D2D nodes as proximity-based independently marked homogeneous Poisson point process. The proximity considers physical distance between D2D nodes whereas social relationship is modeled as Zipf-based marks. We apply these two paradigms to analyze the effect of interference on coverage probability of distance-proportional power-controlled cellular user. Effectively, we apply two types of functional mappings (physical distance, social marks) to Laplace functional of PPP. The resulting coverage probability has no closed-form expression; however, for a subset of social marks, the mark summation converges to digamma and polygamma functions. This subset constitutes the upper and lower bounds on coverage probability. We present numerical evaluation of these bounds on coverage probability by varying number of different parameters. The results show that by imparting simple power control on cellular user, ultradense underlay D2D network can be realized without compromising the coverage probability of cellular user. [ABSTRACT FROM PUBLISHER]

In this paper, using stochastic geometry, we investigate the average energy efficiency (AEE) of the user terminal (UT) in the uplink of a two-tier heterogeneous network, where the two tiers are operated on separate carrier frequencies. In such a deployment, a typical UT must periodically perform the interfrequency small-cell discovery (ISCD) process to discover small cells in its neighborhood and benefit from the high data rate and traffic offloading opportunity that small cells present. We assume that the base stations of each tier and UTs are randomly located, and we derive the average ergodic rate and UT power consumption, which are later used for our AEE evaluation. The AEE incorporates the percentage of time that a typical UT missed small-cell offloading opportunity as a result of the periodicity of the ISCD process. The additional power consumed by the UT due to the ISCD measurement is also included. Moreover, we derive the optimal ISCD periodicity based on the UT's average energy consumption (AEC) and AEE. Our results reveal that ISCD periodicity must be selected with the objective of either minimizing the UT's AEC or maximizing the UT's AEE. [ABSTRACT FROM PUBLISHER]

The Internet of Things (IoT) and its applications in industrial settings are set to bring in the fourth industrial revolution. The industrial environment consisting of high profile manufacturing plants and a variety of equipment is inherently characterized by high reflectiveness, causing significant multi-path components that affect the propagation of wireless communications—a challenge among others that needs to be resolved. This paper provides a detailed insight into Narrow-Band IoT (NB-IoT), Industrial IoT (IIoT), and Wireless Sensor Networks (WSN) within the context of indoor industrial environments. It presents the applications of NB-IoT for industrial settings, such as the challenges associated with these applications. Furthermore, future research directions were put forth in the areas of NB-IoT network management using self-organizing network (SON) technology, edge computing for scalability enhancement, security in NB-IoT generated data, and proposing a suitable propagation model for reliable wireless communications. [ABSTRACT FROM AUTHOR]

The rapid advancements in wireless communications are expected to increase the demand for radio spectrum resources by orders of magnitude during the next decade. This problem must be addressed using technology and regulatory innovations for significant improvements in spectrum utilization in cellular networks. Emerging cognitive radio technology has been identified as a high-impact disruptive innovation that could provide solutions to the cellular traffic congestion problems and exploit the underutilized spectral resources to pave an application-driven path toward the next generation of cellular technology. [ABSTRACT FROM PUBLISHER]

As the idea of a new wireless communication standard (5G) started to circulate around the world, there was much speculation regarding its performance, making it necessary to carry out further research by keeping in view the challenges presented by it. 5G is considered a multi-system support network due to its ability to provide benefits to vertical industries. Due to the wide range of devices and applications, it is essential to provide support for massively interconnected devices. Network slicing has emerged as the key technology to meet the requirements of the communications network. In this paper, we present a review of the latest achievements of 5G network slicing by comparing the architecture of The Next Generation Mobile Network Alliance's (NGMN's) and 5G-PPP, using the enabling technologies software-defined networking (SDN) and network function virtualization (NFV). We then review and discuss machine learning (ML) techniques and their integration with network slicing for beyond 5G networks and elaborate on how ML techniques can be useful for mobility prediction and resource management. Lastly, we propose the use case of network slicing based on ML techniques in a smart seaport environment, which will help to manage the resources more efficiently. [ABSTRACT FROM AUTHOR]

The increasing needs of free licensed frequency bands like Industrial, Scientific, and Medical (ISM), Wireless Local Area Network (WLAN), and 5G for underwater communications required more bandwidth (BW) with higher data transferring rate. Microwaves produce a higher transferring rate of data, and their associated devices are smaller in comparison with sonar and ultrasonic. Thus, transceivers should have broad BW to cover more of a frequency band, especially from ultra-wideband (UWB) systems, which show potential outcomes. However, previous designs of similar work for underwater communications were very complicated, uneasy to fabricate, and large. Therefore, to overcome these shortcomings, a novel compact elliptical UWB antenna is designed to resonate from 1.3 to 7.2 GHz. It is invented from a polytetrafluoroethylene (PTFE) layer with a dielectric constant of 2.55 mm and a thickness of 0.8 mm. The proposed antenna shows higher gain and radiation efficiency and stability throughout the working band when compared to recent similarly reported designs, even at a smaller size. The characteristics of the functioning antenna are investigated through fluid mediums of fresh-water, seawater, distilled water, and Debye model water. Later, its channel capacity, bit rate error, and data rate are evaluated. The results demonstrated that the antenna offers compact, easier fabrication with better UWB characteristics for underwater 5G communications. [ABSTRACT FROM AUTHOR]

In this paper, we propose novel Hybrid Automatic Repeat re-Quest (HARQ) strategies used in conjunction with hybrid relaying schemes, named as H^2-ARQ-Relaying. The strategies allow the relay to dynamically switch between amplify-and-forward/compress-and-forward and decode-and-forward schemes according to its decoding status. The performance analysis is conducted from both the spectrum and energy efficiency perspectives. The spectrum efficiency of the proposed strategies, in terms of the maximum throughput, is significantly improved compared with their non-hybrid counterparts under the same constraints. The consumed energy per bit is optimized by manipulating the node activation time, the transmission energy and the power allocation between the source and the relay. The circuitry energy consumption of all involved nodes is taken into consideration. Numerical results shed light on how and when the energy efficiency can be improved in cooperative HARQ. For instance, cooperative HARQ is shown to be energy efficient in long distance transmission only. Furthermore, we consider the fact that the compress-and-forward scheme requires instantaneous signal to noise ratios of all three constituent links. However, this requirement can be impractical in some cases. In this regard, we introduce an improved strategy where only partial and affordable channel state information feedback is needed. [ABSTRACT FROM PUBLISHER]