Search

The annual production of driftwood in Italy has been estimated to be more than 60,000 tonnes. This wood can be used as an energy source. Particular attention should be paid to its content of alkali and alkaline earth metals, sulfur and chlorine. Few works are available in the literature on this topic. For this reason, the authors propose experimental tests of combustion, gasification and pyrolysis, to evaluate the fate of alkali and alkaline earth metals, sulfur and chlorine in the solid residues and compare the three thermal degradation technologies. The results show a release of alkaline earth metals of about 45% of the initial quantity for gasification and a release of 55% of the initial quantity for combustion (while pyrolysis at 600°C has a very low release). The release of sodium is about 65% for gasification and 80% for combustion. It can be seen that the release of sodium is higher than that of alkaline earth metals; this is due to the divalency of the last ones. Dealing with the release of major elements (chlorine, sulfur and AAEMs) the tests have shown that pyrolysis process is a low emitting technology., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The study investigated the production of bioethanol from softwood, in particular pine wood chip. The steam explosion pretreatment was largely investigated, evaluating also the potential use of a double-step process to increase ethanol production through the use of both solid and liquid fraction after the pretreatment. The pretreatment tests were carried out at different conditions, determining the composition of solid and liquid fraction and steam explosion efficiency. The enzymatic hydrolysis was carried out with Ctec2 enzyme while the fermentation was carried out using Saccharomyces Cerevisiae yeast "red ethanol". It was found that the best experimental result was obtained for a single-step pretreated sample (10.6 g of ethanol/100 g of initial biomass dry basis) for a 4.53 severity. The best double-step overall performance was equal to 8.89 g ethanol/100 g of initial biomass dry basis for a 4.27 severity. The enzymatic hydrolysis strongly depended on the severity of the pretreatment while the fermentation efficiency was mainly influenced by the concentration of the inhibitors. The ethanol enhancing potential of a double-step steam explosion could slightly increase the ethanol production compared to single-step potential.