Search

This study presents the experimental results obtained from hybrid filtration combustion using biomass pellets. The experiments were carried out using a porous media gasifier filled with pellets and inert material. The gasifying agent used was an air–steam mixture, with 40% being steam. The dependence of the temperature in the gasifier's reaction zone from the volume percentage of inert porous material in the gasifier, the specific heat capacity of this material, as well as the air–steam blowing rate, was investigated. The multifactor experiment method was used. A maximum temperature of 1245 °C was achieved using 28 vol% of porous material with a heat capacity of 1000 J/(kg·°C) and at a blowing rate of 42 m3/h. The maximum hydrogen content in the syngas was 28 vol%. This was achieved at an air–steam blowing rate of 42 m3/h and 40 vol% porous material, with a heat capacity of 1000 J/(kg·°C). The calorific value of the syngas was 12.6 MJ/m3. The highest CO content in the gas was 28 vol% and was obtained at 20 vol% porous material with a heat capacity of 1000 J/(kg·°C) and a blowing rate of 42 m3/h. The obtained information is applicable in the design, management, and control of gas production by way of a hybrid filtration combustion process in a downdraft gasifier. [ABSTRACT FROM AUTHOR]

The gasification rate of fuel, biomass gasification in particular, is an important parameter which is worth considering in the process of creating a gasifier with a continuous operation process. The gasification of biomass is a complex thermochemical process. The theoretical and practical studies of the gasification rate of biomass are complicated because of a high thermochemical rate of reactions in the functioning zones of a gasifier. The complexity of the study prevents the achievement of the required accuracy of the analytical model of the gasification rate of biomass. The known theoretical models of the gasification rate only partially describe the dynamics of the gasification rate of biomass. Moreover, most scientific studies are focused on establishing the effects of gasifier parameters and the gasification process on the quality indicators of the received gas but not on the gasification rate of fuel. To build an accurate model of the gasification rate the authors propose a series of experimental studies in a well-defined range of the parameters of a gasifier. The paper suggests a simple mathematical model of the gasification rate of biomass, which is proportional to the amount of plant biomass that remained non-gasified. The coefficients of the gasification rate for straw pellets, wood pellets and wood in pieces have been determined. Under a minimal air supply into an active zone of a gasifier (0.00088 m3/s) a coefficient of gasification rate is nearly the same for the test fuel materials and it differs by 4.7% between wood pellets and straw pellets. When the air supply increases, the gap between the coefficients increases as well and it reaches 9.44 × 10−5 c−1 for wood pellets, 1.05 × 10−4 c−1 for straw pellets and 8.64 × 10−5 c−1 for wood in pieces under air supply into an active zone of a gas generator of 0.01169 m3/s. Straw pellets have the highest gasification rate and wood in pieces has the lowest gasification rate. [ABSTRACT FROM AUTHOR]

The paper presents the results of research aimed at evaluating the possibility of using selected tree leaf species to produce solid biofuels. The possibility of production of qualitative solid biofuels from urban tree leaves meets the expectations of the municipal sector. Collection of tree leaves in urban areas is very often necessary for road safety reasons, the need to collect biomass rich in dust and pollution as well as biomass infested with pests. The production of solid biofuels from tree leaves allows for effective management of this raw material with energy recovery. The performed research indicates such a possibility, and the obtained ash is used as a soil improver. The conducted research showed that the biomass of leaves of five tree species used in the experiment can be a source of raw materials for production of qualitative biofuels. The obtained pellets were characterized by properties comparable to those of classical wood pellets. The lower heating value of the obtained pellets ranged from 14.5 to 15.5 MJ∙kg−1. Physical properties of the obtained pellets described by bulk density (BD 600–660 kg∙m−3), mechanical durability (DU 90–96%), moisture (Mar 10–12.5%) indicate that these products can be used in existing combustion equipment. Preliminary analysis of the obtained ashes (determination of ash melting point, bulk density) indicates that they should not cause difficulties in ash removal systems from the combustion chamber. [ABSTRACT FROM AUTHOR]

The process of biomass compaction depends on many factors, related to material and process. One of the most important is the proper fragmentation of the raw material. In most cases, more fragmented raw material makes it easier to achieve the desired quality parameters of pellets or briquettes. While the chipping of biomass prefers moist materials, for grinding, the material needs to be dried. As drying temperature changes the properties of the material, these may affect the grinding process. The aim of this work was to determine the influence of the drying temperature of biomass raw material in the range of 60–140 °C on the biomass grindability. To only determine this effect, without the influence of moisture, grinding was carried out on the material in a dry state. The research was carried out on a mill with a knife and hammer grinding system, which is the most popular in the fragmentation of biomass. The analysis of particle size distribution and bulk density of the obtained material was carried out. The energy demand for the grinding process was determined and it was shown that drying temperature, grinding system, and mainly type of biomass affects the grindability. [ABSTRACT FROM AUTHOR]

Increasing production of waste has compelled the development of modern technologies for waste management. Certain fractions of municipal solid wastes are not suitable for recycling and must be utilised in other ways. Materials such as refuse-derived fuel (RDF) fractions are used as fuel in cement or CHP (combined heat and power) plants. The low bulk density leads to many problems pertaining to transportation and storage. In the case of biomass, these problems cause reduction in pelletisation. This paper therefore presents a comprehensive study on RDF pellet production, which is divided into three major areas. The first describes laboratory-scale tests and provides information on key factors that affect pellet quality (e.g., density and durability). Based on this, the second part presents a design of modified RDF dies to form RDF pellets, which are then tested via a semi-professional line test. The results show that RDF fraction can be compacted to form pellets using conventional devices. Given that temperature plays a key role, a special die must be used, and this ensures that the produced pellets exhibit high durability and bulk density, similar to biomass pellets. [ABSTRACT FROM AUTHOR]