Search

The white beam (∼6–80 keV) available at the TopoTomo X-ray beamline of the ANKA synchrotron facility (KIT, Karlsruhe, Germany) was used to perform edge-enhancement imaging tests on lithium fluoride radiation detectors. The diffracted X-ray image of a microscopic boron fibre, consisting of tungsten wire wrapped by boron cladding, was projected onto lithium fluoride thin films placed at several distances, from contact to 1 m . X-ray photons cause the local formation of primary and aggregate colour centres in lithium fluoride; these latter, once illuminated under blue light, luminesce forming visible-light patterns—acquired by a confocal laser scanning microscope—that reproduce the intensity of the X-ray diffracted images. The tests demonstrated the excellent performances of lithium fluoride films as radiation detectors at the investigated photon energies. The experimental results are here discussed and compared with those calculated with a model that takes into account all the processes that concern image formation, storing and readout. [ABSTRACT FROM AUTHOR]

Colour centres (CCs) in lithium fluoride (LiF) are well known for application in tuneable lasers and dosimeters. The visible photoluminescence (PL) of radiation-induced, broad-band light-emitting aggregate CCs in LiF crystals and films has been proposed for high spatial resolution X-ray imaging; use of LiF-based detectors has been recently successfully extended to advanced diagnostics of low-energy proton beams. After exposure, transversal dose mapping was obtained on LiF films by acquiring the visible PL image of the irradiated spots in a fluorescence microscope under blue-light pumping. Irradiation of thermally evaporated LiF thin films with a proton beam of 3 MeV nominal energy, produced by a linear accelerator, in the fluence range of 10 11 –10 15 protons/cm 2 , induces the formation of stable CCs, mainly the primary F centre and the aggregate F 2 and F 3 + defects. A comparison with irradiations performed at 7 MeV shows that the spectrally integrated PL as a function of the absorbed dose is independent on the selected beam energy, at least as far as typical LiF film thicknesses are concerned. The PL behaviour vs. dose can be described by a linear growth which covers up to three order of magnitude, followed by saturation at high values (> ≈10 5 Gy). The spectral contributions of F 2 and F 3 + CCs to the detected PL, in the red and in the green respectively, under laser pumping were carefully analysed in order to investigate behaviour differences of these defects at high doses. [ABSTRACT FROM AUTHOR]

Luminescence properties of point defects in insulating materials are successfully used for solid state light sources and radiation detectors. Among them, colour centres in lithium fluoride, LiF, are well known for their application in tuneable lasers and dosimeters. Broad-band light-emitting F 2 and F 3 + electronic defects, stable at room temperature, are produced in LiF crystals and films by different kinds of radiation. Under blue optical pumping in their overlapping absorption bands, the efficient photoluminescence spans over the green–red visible spectral range. Novel LiF thin-film radiation imaging detectors based on the exploitation of the peculiar spectral characteristics of F 2 and F 3 + defects and of the optical properties and radiation sensitivity of the LiF material have been proposed and successfully tested for extreme ultraviolet radiation, soft and hard X-ray imaging, including micro-radiography of biological objects, even for in vivo samples. After exposure to X-rays, the latent images stored in the LiF thin layers by local formation of active defects are read with conventional and advanced optical fluorescence microscopes. Among the main advantages of the LiF thin-film imaging detectors, there are intrinsic very high spatial resolution, large field of view and wide dynamic range. Moreover, these solid state radiation detectors are easy to handle, as insensitive to ambient light, and no development process is needed. Recently their use has been extended to proton beam advanced diagnostics. In this paper, a short review of their properties, results and applications in X-ray biological imaging and proton dose-mapping is presented, underlying the great versatility and potentialities offered by LiF thin films, whose photoluminescence response can be improved through the choice of suitable substrates and growth conditions. [ABSTRACT FROM AUTHOR]

Abstract: In this work, we present preliminary in-line X-ray lensless projection imaging results at a synchrotron facility by using novel solid-state detectors based on non-destructive readout of photoluminescent colour centres in lithium fluoride thin films. The peculiarities of LiF radiation detectors are high spatial resolution on a large field of view, wide dynamic range, versatility and simplicity of use. These properties offered the opportunity to test a broadband X-ray synchrotron source for lensless projection imaging experiments at the TopoTomo beamline of the ANKA synchrotron facility by using a white beam spectrum (3–40 keV). Edge-enhancement effects were observed for the first time on a test object; they are discussed and compared with simulations, on the basis of the colour centre photoluminescence linear response found in the investigated irradiation conditions. [Copyright &y& Elsevier]

Abstract: Novel X-ray imaging detectors based on photoluminescence of colour centres in lithium fluoride (LiF) have been proposed and tested for extreme ultraviolet, soft and hard X-rays up to 10keV. For the first time we present the optical characterisation of LiF crystals and thin films irradiated at the TOPO–TOMO beamline of synchroton light source Anka (Karlsruhe, Germany) in the energy range 6–40keV for different exposure times. Absorption and photoluminescence spectra were analysed to study the optical response of the LiF-based detectors. High resolved X-ray imaging of commercial test patterns has been obtained on LiF crystals and films by optical readout with a confocal laser scanning fluorescence microscope. [Copyright &y& Elsevier]