Search

Grazing-incidence small-angle X-ray scattering (GISAXS) can be used to characterize the replica quality of polymer gratings prepared by thermal nanoimprint lithography (NIL). Here it is shown using GISAXS experiments that a series of NIL polymer gratings with different line quality present characteristic features that can be associated with the level of defects per line. Both stamps and NIL polymer gratings exhibit characteristic semicircle-like GISAXS patterns. However NIL polymer gratings with defective lines exhibit GISAXS patterns with an excess of diffuse scattering as compared to those of the corresponding stamps. In a first approach, this effect is attributed to a reduction of the effective length of the lines diffracting coherently as the number of defects per line increases. [ABSTRACT FROM AUTHOR]

Grazing-incidence small-angle X-ray scattering (GISAXS) has been used to structurally characterize model hard and soft gratings of nanotechnological interest. The different gratings exhibit GISAXS patterns with characteristic features that can be associated with their level of order along the direction of periodicity and the length of the lines. Highly ordered gratings, made out of silicon by electron beam lithography, and those nanofabricated on spin-coated polymer films by nanoimprint lithography, exhibit characteristic semicircle-like GISAXS patterns with intensity spots periodically distributed on a semicircle whose radius is related to the incidence angle used. These gratings can be considered as one-dimensional crystalline lattices as provided by computer simulations. Less ordered polymer gratings prepared by the laser-induced periodic surface structuring method exhibit a GISAXS pattern characterized by periodic rod-like scattering maxima whose intensity decreases with increasing horizontal scattering angle. In this case the gratings can be considered as one-dimensional paracrystals. The transition from a rod-like to a semicircle-like GISAXS pattern has been simulated and attributed to the contribution of the form factor by changing the length of the line (ripple). A critical length value for the transition is located at around a few micrometres. [ABSTRACT FROM AUTHOR]

Deformation mechanisms occurring on the nanometre scale during indentation of bulk polymer fibres were investigated by means of scanning wide-angle X-ray scattering (WAXS) using beams of micrometer size at the ESRF microfocus beamline (ID13). Elastic processes could be evidenced in-situ using a dedicated microindenter device. The most important changes appear in the form of local crystalline reorientation which can be quantified by analysis of the azimuthal profiles of the WAXS reflections. The texture and phase-transitions induced by plastic deformation at higher loads were also measured and the differences between high performance fibres and a more traditional semicrystalline polymer are emphasized. [ABSTRACT FROM AUTHOR]

Here we present a novel, simple, and versatile experimental setup aimed to perform wide angle x-ray scattering (WAXS) measurements alone or in simultaneous combination with small angle x-ray scattering measurements. The design of the WAXS goniometer allows one to obtain high resolution diffraction patterns in a broad angular range. The setup can incorporate a hot stage in order to evaluate temperature resolved experiments. The performance of the equipment has been verified in the BM16 beam line of the European Synchrotron Radiation Facility with different well known samples such as alumina, isotropic film of high density polyethylene (HDPE), and oriented HPDE fiber. [ABSTRACT FROM AUTHOR]

The isothermal cold crystallization of poly(ethylene terephthalate)(PET) in cryogenic mechanical alloyed blends of PET and Poly(ethylene naphthalene 2,6-dicarboxilate)(PEN) 1:1 by weight has been investigated by simultaneous small and wide angle X-ray scattering (SAXS and WAXS) and dielectric spectroscopy (DS). For transesterification levels higher than 23% the blends tend to transform into a one-phase system and the crystallization of PET is strongly inhibited due to the significant reduction of the PET segment length. For lower levels of transesterification the blends are phase separated and the overall crystallization behaviour can be explained considering the confined nature of the PET domains in these blends. The formation of a rigid amorphous phase in the intra-lamellar stack amorphous regions is reduced in the blends due to a lower probability of stack formation in the confined PET-rich domains. The more effective filling of the space by the lamellar crystals in the blends provokes a stronger restriction to the amorphous phase mobility of PET in the blends than in pure PET. [ABSTRACT FROM AUTHOR]

The melting transition of a model semicrystalline polymer has been detected by the microcantilever deflection as a function of temperature. Deflection measurements were done on arrays of 8-cantilevers spin coated with the semicrystalline polymer: poly (propylene azelate). The melting of the polymer has been corroborated by grazing incidence wide angle x-ray scattering experiments performed with synchrotron radiation over a single cantilever. [ABSTRACT FROM AUTHOR]