Search

Exotic atom experiments place transition-edge sensor (TES) microcalorimeter arrays in a high-energy charged particle-rich environment. When a high-energy charged particle passes through the silicon substrate of a TES array, a large amount of energy is deposited and small pulses are generated across multiple pixels in the TES array due to thermal crosstalk. We have developed analysis techniques to assess and reduce the effects of charged particle events on exotic atom X-ray measurements. Using this technique, the high-energy and low-energy components of the X-ray peaks due to pileup are eliminated, improving the energy resolution from 6.6 to 5.7 eV at 6.9 keV. [ABSTRACT FROM AUTHOR]

A novel triggering function developed for 240-pixel Transition-Edge Sensors is demonstrated under the high rate of particle background. The function is integrated into the standard data acquisition system in the NIST TES framework. It enables any type of combination of trigger pattern when a pixel is triggered, which is called "group trigger." As a practical implementation, the primary trigger is distributed to the four physically nearest pixels. The group trigger function was utilized throughout the entire one-month J-PARC experiment for the measurement of the Kaonic-atom X-rays. This trigger allowed us to confirm that the increased background and degraded energy resolution we observed when operating the TES array in the presence of an ion beam are the result of thermal crosstalk from charged particles. We show that the maximum of the average of the signals among the neighboring four pixels is useful for event selection. We use cuts based on this parameter to improve the peak-to-background level in a measured x-ray energy spectrum by a factor of ∼ 2, while keeping 95% of measured events. This flexible group triggering technique allows us to improve the signal to noise on the very faint Kaonic Helium x-ray lines we are measuring, better understand our experiment environment, and we believe this technique may prove useful in other ground and space-based TES applications. [ABSTRACT FROM AUTHOR]

A useful function, called group trigger, is implemented in a data acquisition system of a 240-pixel X-ray transition-edge sensor array to store simultaneous waveforms from any desired set of pixels. It works as a diagnostic tool which can record both primary pulses and associated crosstalk events with enough freedom to optimize the data output. Under a high rate of charged particle background, such as in an accelerator, investigating signals from any combination of trigger patterns for a particular event is of high importance. We utilized this function throughout an entire experiment at J-PARC, measuring kaonic atom X-rays in 2018. This was the first time a group trigger was applied to exotic-atom spectroscopy. In this experiment, the primary trigger was distributed to the four physical nearest neighbor pixels for practical purposes. The function clarified the effect of thermal and electrical cross talk from X-rays and charged particles, resulting in a better understanding of the behavior of the TES array in such a high-background environment. [ABSTRACT FROM AUTHOR]

Code-division multiplexing (CDM) offers a path to reading out large arrays of transition edge sensor (TES) X-ray microcalorimeters with excellent energy and timing resolution. We demonstrate the readout of X-ray TESs with a 32-channel flux-summed code-division multiplexing circuit based on superconducting quantum interference device (SQUID) amplifiers. The best detector has energy resolution of 2.28 ± 0.12 eV FWHM at 5.9 keV and the array has mean energy resolution of 2.77 ± 0.02 eV over 30 working sensors. The readout channels are sampled sequentially at 160 ns/row, for an effective sampling rate of 5.12 μ/channel. The SQUID amplifiers have a measured flux noise of 0:17 μΦ0/√Hz (non-multiplexed, referred to the first stage SQUID). The multiplexed noise level and signal slew rate are sufficient to allow readout of more than 40 pixels per column, making CDM compatible with requirements outlined for future space missions. Additionally, because the modulated data from the 32 SQUID readout channels provide information on each X-ray event at the row rate, our CDM architecture allows determination of the arrival time of an X-ray event to within 275 ns FWHM with potential benefits in experiments that require detection of near-coincident events. [ABSTRACT FROM AUTHOR]

A performance evaluation of superconducting transition-edge sensors (TESs) in the environment of a pion beam line at a particle accelerator is presented. Averaged across the 209 functioning sensors in the array, the achieved energy resolution is 5.2 eV FWHM at Co $$K_{\alpha }$$ (6.9 keV) when the pion beam is off and 7.3 eV at a beam rate of 1.45 MHz. Absolute energy uncertainty of $$\pm $$ 0.04 eV is demonstrated for Fe $$K_{\alpha }$$ (6.4 keV) with in-situ energy calibration obtained from other nearby known X-ray lines. To achieve this small uncertainty, it is essential to consider the non-Gaussian energy response of the TESs and thermal cross-talk pile-up effects due to charged particle hits in the silicon substrate of the TES array. [ABSTRACT FROM AUTHOR]

We are developing code-division multiplexing (CDM) systems for TES arrays with the goal of reaching multiplexing factors in the hundreds. We report on x-ray measurements made with a four-channel prototype CDM system that employs a flux-summing architecture, emphasizing data-analysis issues. We describe an empirical method to determine the demodulation matrix that minimizes cross-talk. This CDM system achieves energy resolutions of between 2.3 eV and 3.0 eV FWHM at 5.9 keV. [ABSTRACT FROM AUTHOR]

We report on 23 clusters detected blindly as Sunyaev-Zel'dovich (SZ) decrements in a 148 GHz, 455 deg² map of the southern sky made with data from the Atacama Cosmology Telescope 2008 observing season. All SZ detections announced in this work have confirmed optical counterparts. Ten of the clusters are new discoveries. One newly discovered cluster, ACT-CL J0102-4915, with a redshift of 0.75 (photometric), has an SZ decrement comparable to the most massive systems at lower redshifts. Simulations of the cluster recovery method reproduce the sample purity measured by optical follow-up. In particular, for clusters detected with a signal-to-noise ratio greater than six, simulations are consistent with optical follow-up that demonstrated this subsample is 100% pure. The simulations further imply that the total sample is 80% complete for clusters with mass in excess of 6 x 1014 solar masses referenced to the cluster volume characterized by 500 times the critical density. The Compton y-X-ray luminosity mass comparison for the 11 best-detected clusters visually agrees with both self-similar and non-adiabatic, simulation-derived scaling laws. [ABSTRACT FROM AUTHOR]

Microcalorimeter detectors provide superior energy resolution for the detection of X-rays and gamma-rays. The technology utilizes a cryogenic transition-edge sensor (TES) coupled to a tin bulk absorber. We are working on fabrication methods for the production of arrays with many sensors. In this paper, we present data collected with an array of microcalorimeters using as many as 26 sensor elements simultaneously. Advances in sensor design have extended the useful dynamic range to photon energies up to ∼200 keV, while providing resolution performance in the 80–90 eV FWHM range, significantly better than planar high-purity germanium. These sensor arrays have applications in the measurement of nuclear materials. We present data collected from 153Gd, a highly-enriched uranium sample, and a plutonium isotopic standard source. We also demonstrate clean separation of the 235U 185.715 keV peak from the ubiquitous 226Ra 186.211 keV background peak interference. [ABSTRACT FROM AUTHOR]

We demonstrate the code-division multiplexing (CDM) readout of eight transition-edge sensor microcalorimeters. The energy resolution is 3.0 eV (full width at half-maximum) or better at 5.9 keV, with a best resolution of 2.3 eV and a mean of 2.6 eV over the seven modulated detectors. The flux-summing CDM system is described and compared with similar time-division multiplexing (TDM) readout. We show that the [formula] multiplexing disadvantage associated with TDM is not present in CDM. This demonstration establishes CDM as both a simple route to higher performance in existing TDM microcalorimetric experiments and a long-term approach to reaching higher multiplexing factors. [ABSTRACT FROM AUTHOR]

We present experimental results from a four-pixel array of transition-edge-sensor, x-ray microcalorimeters read out through a single amplifier channel via a time-division superconducting quantum interference device multiplexer. We map the dependence of the x-ray energy resolution of the microcalorimeters on multiplexer timing parameters. We achieve multiplexed, four-pixel resolution of 6.94±0.05 eV full width at half maximum of the Mn Kα complex near 5.9 keV, which is a degradation of only 0.44 eV from nonmultiplexed operation. An analysis of straightforward upgrades to the multiplexer predicts that a linear array of 32 of these pixels could he multiplexed with a degradation in resolution of only 0.1 eV. These results, the first demonstration of a time-division multiplexer for x-ray detectors, establish a clear path to the instrumentation of a kilopixel microcalorimeter array. [ABSTRACT FROM AUTHOR]