Search

In our previous study, a three-dimensional zein porous scaffold with a compressive Young's modulus of up to 86.6+/-19.9 MPa and a compressive strength of up to 11.8+/-1.7 MPa was prepared, and was suitable for culture of mesenchymal stem cells (MSCs) in vitro. In this study, we examined its tissue compatibility in a rabbit subcutaneous implantation model; histological analysis revealed a good tissue response and degradability. To improve its mechanical property (especially the brittleness), the scaffolds were prepared using the club-shaped mannitol as the porogen, and stearic acid or oleic acid was added. The scaffolds obtained had an interconnected tubular pore structure, 100-380 microm in pore size, and about 80% porosity. The maximum values of the compressive strength and modulus, the tensile strength and modulus, and the flexural strength and modulus were obtained at the lowest porosity, reaching 51.81+/-8.70 and 563.8+/-23.4 MPa; 3.91+/-0.86 and 751.63+/-58.85 MPa; and 17.71+/-3.02 and 514.39+/-19.02 MPa, respectively. Addition of 15% stearic acid or 20% oleic acid did not affect the proliferation and osteogenic differentiation of MSCs, and a successful improvement of mechanical properties, especially the brittleness of the zein scaffold could be achieved.

Unlabelled: Cytocompatibility of particle zein (Pzein) and film zein (Fzein) was evaluated and compared with polyhydroxybutyrate (PHB), its copolymer poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), polylactic acid (PLA), and collagen, using HL-7702 cells, in terms of cell attachment rate within 3 h, and cell viabilities at 3 and 6 days determined by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) method. The zein degradation test was carried out using collagenase and trypsin, and the degradation product was added to the culture medium at different concentrations in order to examine the concentration-dependent cytotoxic effect., Result: The adhesion rate of the HL-7702 cells on both Pzein and Fzein was higher than that on collagen film. Cell viabilities were higher on both Pzein and Fzein than on films of PLA, PHB, PHBV, and collagen from fish skin. Zein can be degraded by both trypsin and collagenase, and the degradation product can enhance cell viability within a certain range of concentrations., (Copyright 2005 by Wiley Periodicals, Inc)

Zein was studied as a drug-eluting coating film composed of zein microspheres for cardiovascular devices (e.g. stent). In vitro 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) analysis showed that both zein film and its degraded product had better biocompatibility compared with Corning culture plate on the growth of human umbilical veins endothelial cells (HUVECs, p<0.05, n=6), and the effect of zein degraded product on HUVECs was dose-dependent. The best result was obtained at 0.3 mg/ml of the addition. The encapsulation efficiency of heparin and heparin loading varied with the amount of both zein and heparin, and the highest encapsulation efficiency (heparin 1.33 mg/ml and zein 16 mg/ml) was 22.77+/-1.33% (n=3). Scanning electron microscope (SEM) observation indicated that the zein film was made of microspheres in diameter from nano- to micrometer, which could be controlled. Sizes of heparin-loaded zein microspheres changed before and after release of heparin because of conglutination among zein microspheres. Release rate of heparin from microsphere film reached to 33.5+/-1.2% within 12 h, and began to get into subsequent "slow release" phase; about 55% of the entrapped heparin was released after 20 days. Both zein film and heparin-loaded zein microsphere film were effective in suppressing platelet adhesion, and the heparin-loaded film showed a better anticoagulation as determined with thrombin time (TT) assay. These results suggest that zein film could be used directly as a new type of coating material for its better biocompatibility with HUVECs. Moreover, the heparin-loaded zein microsphere film can significantly improve the hemocompatibility.