Search

A novel ac/dc LED driver with power factor correction and soft-switching functions is proposed. The circuit topology mainly consists of two modified single-ended primary inductance converters (SEPIC) with interleaved operation. The first half stage of SEPIC operates like a boost converter and the second half stage operates like a buck–boost converter. Each boost converter is designed to operate in discontinuous current mode (DCM) to function as a power factor corrector (PFC). The two buck–boost converters that share a commonly coupled inductor are designed to operate at near boundary conduction mode (BCM). Without using any active clamping circuit, auxiliary switch or snubber circuit, the active switches can achieve zero-voltage switching on, and all diodes achieve zero-current switching off. First, operation modes in steady state are analyzed, and the mathematical equations for design component parameters are derived. Finally, a prototype circuit of 180 W rated power was built and tested. Experimental results show satisfactory performance of the proposed circuit. [ABSTRACT FROM AUTHOR]

This study presents a dc/dc converter featuring soft-switching characteristic, high conversion efficiency, and high step-up ratio. The proposed circuit is composed of two parallel-connected boost converters. Only one coupled inductor is used to replace inductors of the boost converters which are interleaved operated at discontinuous-conduction mode (DCM). The current ripples at the input and the output terminals are reduced due to the interleaved operation. By freewheeling the current of the coupled inductor to discharge the stored electric charges in the parasitic capacitors of the active switches, both active switches can fulfill zero-voltage switching on (ZVS). Owing to DCM operation, the freewheeling diodes can fulfill zero-current switching off (ZCS). Therefore, the power conversion efficiency is improved. The operation principle for each operation mode is analyzed in detail and design equations for the component parameters are provided in this report. Finally, a prototype 200 W 48–400 V converter was implemented and measured to demonstrate the effectiveness of the proposed circuit. [ABSTRACT FROM AUTHOR]

In this paper, a high-efficiency solar array simulator (SAS) implemented by an LLC resonant dc–dc converter is proposed to save the cost and energy of photovoltaic (PV) system testing. The proposed converter has zero-voltage switching (ZVS) operation of the primary switches and zero-current switching (ZCS) operation of the rectifier diodes. By frequency modulation control, the output impedance of an LLC resonant converter can be regulated from zero to infinite without shunt or serial resistors. Therefore, the efficiency of the proposed SAS can be significantly increased. The circuit operations are analyzed in detail to derive the theoretical equations. Circuit parameters are designed based on the practical considerations. Finally, an illustrative example is implemented to demonstrate the feasibility of the proposed SAS. [ABSTRACT FROM AUTHOR]

Light-emitting diode (LED) has the characteristics of environmental protection and energy saving, having become the lighting source of a new generation of street-light lamps. The traditional two-stage power supply for providing an LED street-light lamp is composed of an AC-DC converter with a power-factor-correction (PFC) function at the front stage and a DC-DC converter at the rear stage. The two-stage power supply for an LED street-light lamp has a large number of electronic components and costs, and the circuit efficiency is not high. Therefore, this paper presents a novel single-stage high power factor AC-DC power supply for providing an LED street-light lamp featuring soft-switching and Bluetooth wireless dimming capability through using smart tablets or smartphones to remote control the output power of the LED street-light lamp for achieving energy-saving benefits. The proposed AC-DC LED power supply integrates an interleaved buck converter circuit with coupled inductors and a half-bridge LLC resonant converter circuit into a single-stage power conversion circuit. Moreover, the coupled inductor of the interleaved buck converter circuit is designed to operate in the discontinuous conduction mode, which can naturally achieve PFC. In addition, the two power switches in the novel LED power supply have zero-voltage switching (ZVS) characteristics, which can reduce the switching losses of the power switches. The two output diodes have the characteristics of zero-current switching (ZCS), which can reduce the conduction losses of the power diodes. This paper developed a single-stage prototype circuit for providing an 144 W (36 V/4 A)-rated LED street-light lamp. According to the experimental results of the prototype circuit with an AC input voltage of 110 volts, the presented single-stage LED power supply offers high power factor (PF > 0.99), low input-current total harmonic distortion factor (THD < 3%), and high efficiency (>89%). In addition, this paper used the built-in Bluetooth wireless communication function of a smart tablet or smart phone to fulfill remote dimming control. By changing the duty ratio of the control signal, we could realize remote dimming control of 20% to 100% of the output LED street-light lamp power. [ABSTRACT FROM AUTHOR]

This paper presents a single-stage driver with soft-switching and interleaved power-factor correction (PFC) features suitable for light-emitting diode (LED) energy-saving streetlight applications. The proposed LED streetlight driver integrates an interleaved buck-boost PFC converter with coupled inductors and a half-bridge LLC resonant converter into a single-stage power-conversion circuit with reduced voltage stress on the DC-linked capacitor and power switches, and it is suitable for operating at high utility-line voltages. Furthermore, coupled inductors in the interleaved buck-boost PFC converter are operated in discontinuous-conduction mode (DCM) for accomplishing PFC, and the half-bridge LLC resonant converter features zero-voltage switching (ZVS) to reduce switching losses of power switches, and zero-current switching (ZCS) to decrease conduction losses of power diodes. Operational modes and design considerations for the proposed LED streetlight driver are introduced. Finally, a 144 W (36V/4A)-rated LED prototype driver is successfully developed and implemented for supplying a streetlight module and operating with a utility-line input voltage of 220 V. High power factor, low output-voltage ripple factor, low output-current ripple factor, and high efficiency are achieved in the proposed LED streetlight driver. [ABSTRACT FROM AUTHOR]