Search

Due to the contradiction between [ABSTRACT FROM AUTHOR]

A conventional pulse frequency modulation (PFM) controlled LLC resonant converter requires a wide switching frequency operating range to regulate the output voltage. There are some disadvantages of PFM LLC resonant converters: (i) the design and optimisation of magnetic components and gate driver circuitry are challenging; (ii) due to the variable switching frequency operating range, electro‐magnetic interference performance of the converter is degraded; (iii) efficiency degradation; (iv) inability to achieve independent control in multiple‐output applications. To address the above‐mentioned problems and achieve fixed switching frequency operation, a variable magnetising inductance control (VMIC) strategy is proposed. In the proposed VMIC control strategy, the operating switching frequency of the primary switch is fixed and the duty cycle remains constant at 0.5. At the resonant frequency operating point, the output voltage is independent of both the magnetising inductance and load. In addition, the zero current turn‐off operation of the secondary rectifier requires that the switching frequency be designed below the resonant frequency. The operational principles and design considerations of the LLC resonant converter with VMIC are presented. Experimental results from a 200 W prototype are presented to validate the theoretical analysis and the effectiveness of the proposed VMIC control strategy. [ABSTRACT FROM AUTHOR]

In wide voltage range applications, traditional LLC converters suffer from the following issues: (i) to cover a wide voltage gain operating range, the required switching frequency range is also large, which challenges the design and optimisation of magnetic components, gate driver circuitry, and electro-magnetic interference filter; (ii) a small magnetising inductance is preferred in wide voltage gain range application, which leads to the increase of circuit circulating current and corresponding conduction loss; (iii) passive elements are determined based on the minimum switching frequency, so bulky passive elements are required to satisfy the required operation range. To solve these problems, in this study, a full-bridge LLC (FBLLC) resonant converter with two operation modes, namely full-bridge operation and frequency doubler operation, is proposed for wide voltage gain range application. The FBLLC converter discussed in this study can be designed in half of the input voltage range when compared with the conventional method, so smaller switching frequency operating range and higher efficiency operation are guaranteed. In addition, the smooth mode transition is achieved by introducing switching frequency feedforward control and small output voltage overshoot or undershoot is observed. A 150 W experimental prototype was built to validate the theoretical analysis. [ABSTRACT FROM AUTHOR]

The LLC resonant converters commonly adopt frequency modulation (FM) or combination of FM with phase-shift modulation to regulate its output voltage. However, in these control schemes, a variable switching frequency range is required, which makes the magnetic components design complicated. Therefore, in this article, magnetic control (or variable inductor control) is adopted to make the converter operating at constant switching frequency and constant duty cycle. The fundamental harmonic analysis is commonly used because of its characteristic of simplicity. However, the accuracy of this method is reduced and considerable errors occur when the switching frequency or output power changes. Therefore, an optimal design methodology based on time-domain analysis of the LLC resonant converter with magnetic control is proposed in this article. The proposed methodology can assure that the converter will operate in PO or OPO modes within the whole operating range, and zero voltage switching operation for primary switches and zero current switching operation for secondary rectifier will be guaranteed. In addition, by limiting the resonant tank root-mean-square current, the system efficiency is improved. A 200-W experimental prototype is built and the effectiveness of the proposed optimal design methodology is verified. [ABSTRACT FROM AUTHOR]

In this paper, a dual half-bridge LLC resonant converter with magnetic control is proposed for the battery charger application. The primary switches are shared by two LLC resonant networks, and their outputs are connected in series. One of the LLC resonant converters is designed to operate at the series resonant frequency, which is also the highest efficiency operating point, and the constant output voltage characteristic is achieved at this operating point. The second LLC resonant converter adopts magnetic control to regulate the total output current and voltage during both constant current charge mode and constant voltage charge mode. Meanwhile, the function decoupling idea is adopted to further improve the system efficiency. The significant amount of the power is handled by the LLC resonant converter operating at the series resonant frequency, whereas the second LLC resonant converter fulfills the responsibility to achieve closed-loop control. By carefully designing the resonant networks, the zero-voltage switching for primary switches and zero-current switching for secondary diodes can be achieved for whole operation range. A 320-W experimental prototype is built to verify the theoretical analysis, and the maximum efficiency is measured about 95.5%. [ABSTRACT FROM AUTHOR]