Search

Due to the contradiction between [ABSTRACT FROM AUTHOR]

In order to further improve the efficiency of dual-active-bridge (DAB) converter, a hybrid five-variable modulation scheme with minimal root mean square (rms) current is proposed in this article, which combines the traditional phase-shift and pulsewidth modulation schemes. By adopting the proposed optimal scheme, a wider zero-voltage switching (ZVS) operation range and lower rms current level are achieved simultaneously when compared with other modulation schemes, which significantly improves the efficiency of the DAB converter. Moreover, for the complexity of the proposed modulation scheme with five variables, the Fourier decomposition based analytical expressions are derived for the converter and a generalized performance analysis results are presented. Besides, in order to avoid the analysis error, especially at light-load condition, the optimization strategy takes the rms current as the optimal objective, which includes the eight harmonic component of the inductor current rather than just considers the fundamental component. And an offline particle swarm optimization algorithm is introduced to acquire the optimal operating points for the whole power range. To substantiate the effectiveness of the proposed modulation scheme, a comprehensive comparison among related works in terms of the rms value and ZVS range were carried out under various operation condition. Finally, a 1.2 kW experimental platform was built and the highest experimental efficiency under the proposed modulation scheme reaches 96.8%. [ABSTRACT FROM AUTHOR]

Light-emitting diodes (LEDs) are widely used in street lighting, landscape lighting, liquid crystal display (LCD) backlighting, healthcare, etc. As an important part of LED lighting products, LED driver plays a vital role in maintenance costs reduction, energy saving and lifetime prolongation. In this paper, a single-stage LED driver is proposed, which is integrated by a totem-pole bridgeless power factor correction (PFC) unit and several modular LCL-T resonant rectifiers. The totem-pole bridgeless PFC unit and the LCL-T resonant rectifiers are integrated by sharing switches, which can simplify the circuit and reduce the system cost. The output current can be regulated by applying the variable inductor control. Constant duty cycle and fixed switching frequency operation can be achieved as well. The operating principle and the performance of the proposed converter are analyzed in this paper. In addition, a precise parameter design method is proposed by considering the high-order harmonics. At last, an experimental prototype is established to validate the proposed parameter design and variable inductor control method. [ABSTRACT FROM AUTHOR]

Hold-up time operation is a crucial requirement for distributed power systems and server power supplies. LLC resonant converter is widely used in these applications due to its high efficiency and power density characteristics. Conventional pulse frequency modulation (PFM)-controlled inductor-inductor-capacitor (LLC) resonant converter requires a wide switching frequency operation range to satisfy the hold-up requirement. In this article, a novel control scheme is proposed for stacked structure LLC resonant converter. During the normal operation, the frequency doubler modulation strategy is adopted to reduce the switching loss and driving loss, and the output is regulated by PFM. During the hold-up time operation, the pulsewidth modulation is adopted to increase the system voltage gain, where the switching frequency is fixed during this operation stage. For the proposed converter, the resonant tank parameters are designed at the nominal operation point, and the only design consideration for the magnetizing inductor is the zero-voltage switching for primary switches. Therefore, compared with PFM-LLC, both the switching frequency operating range and the circulating current are reduced, and high efficiency feature is obtained. Finally, a 100-W experimental prototype with input voltage range of 160–340 V was built to validate the advantages of the proposed converter. [ABSTRACT FROM AUTHOR]

LLC resonant converters have been widely used in many different industrial applications. Analysis and design methodologies have great effect on the converter performance. Accordingly, a complete step-by-step optimal design methodology based on time-domain analysis has been proposed for an LLC resonant converter in this article. The proposed design methodology is implemented under the worst operation condition, and the following considerations are included to obtain the suitable design area: operation mode; voltage stress for resonant capacitor; zero voltage switching operation for primary switches; and resonant tank root-mean-square current. Then, by finding all possible design candidates and comparing them based on the power loss model, the optimized design candidate can be found. Compared with the existing design methodologies, the proposed one has the advantages of high accuracy and small computation requirement, which makes it application in industry possible. Finally, a 192-W experimental prototype was built to validate the effectiveness of the proposed design methodology. In addition, a MATLAB graphical user interference program was built based on the proposed design methodology to visualize and facilitate the design process for engineers. [ABSTRACT FROM AUTHOR]

Asymmetric duty modulation (ADM), as a recently proposed modulation scheme, provides new chance to improve the performance of dual active bridge (DAB) converter. On this basis, an optimal ADM (OADM) scheme is proposed in this article to minimize the inductor peak-to-peak current over the whole voltage and power range. First, the DAB converter adopting ADM scheme is analyzed in frequency-domain and time-domain, and four operating modes are established. Then, the minimum peak-to-peak inductor current for each operating mode is obtained under Karush–Kuhn–Tucker condition, and the corresponding optimal closed-loop control with low calculation complexity is derived. Then, the key values and features of the OADM scheme are compared with recent state of the art, mainly including the inductor root mean square current and soft-switching performance. Finally, an experimental prototype was built to validate the efficiency enhancement of the converter by adopting the proposed OADM scheme. [ABSTRACT FROM AUTHOR]

In this article, an efficiency-oriented hybrid duty modulation (HDM) scheme is proposed for the dual active bridge (DAB) converter that can reduce the inductor root-mean-square (rms) current and extend the switch soft-switching range. First, a complete description of the combination forms of different modulation schemes is presented considering the allocation of the zero-voltage portion. A unified description for these combination forms is obtained in the frequency domain. Second, the symmetric–symmetric duty modulation (SSDM) scheme and asymmetric–symmetric duty modulation (A2SDM) scheme are established to minimize the inductor rms current by considering its fundamental component. Third, the characteristics of SSDM, A2SDM, and the traditional phase shift modulation schemes are compared from several aspects, mainly including the inductor rms current and the soft-switching performance. Furthermore, the loss breakdown analysis results for the three modulation schemes are presented and compared. According to these results, the HDM scheme is proposed to improve the overall efficiency of the DAB converter. Finally, an experimental prototype was built with a peak efficiency of 97%, which validates the effectiveness of the proposed modulation scheme. [ABSTRACT FROM AUTHOR]

A conventional pulse frequency modulation (PFM) controlled LLC resonant converter requires a wide switching frequency operating range to regulate the output voltage. There are some disadvantages of PFM LLC resonant converters: (i) the design and optimisation of magnetic components and gate driver circuitry are challenging; (ii) due to the variable switching frequency operating range, electro‐magnetic interference performance of the converter is degraded; (iii) efficiency degradation; (iv) inability to achieve independent control in multiple‐output applications. To address the above‐mentioned problems and achieve fixed switching frequency operation, a variable magnetising inductance control (VMIC) strategy is proposed. In the proposed VMIC control strategy, the operating switching frequency of the primary switch is fixed and the duty cycle remains constant at 0.5. At the resonant frequency operating point, the output voltage is independent of both the magnetising inductance and load. In addition, the zero current turn‐off operation of the secondary rectifier requires that the switching frequency be designed below the resonant frequency. The operational principles and design considerations of the LLC resonant converter with VMIC are presented. Experimental results from a 200 W prototype are presented to validate the theoretical analysis and the effectiveness of the proposed VMIC control strategy. [ABSTRACT FROM AUTHOR]

In wide voltage range applications, traditional LLC converters suffer from the following issues: (i) to cover a wide voltage gain operating range, the required switching frequency range is also large, which challenges the design and optimisation of magnetic components, gate driver circuitry, and electro-magnetic interference filter; (ii) a small magnetising inductance is preferred in wide voltage gain range application, which leads to the increase of circuit circulating current and corresponding conduction loss; (iii) passive elements are determined based on the minimum switching frequency, so bulky passive elements are required to satisfy the required operation range. To solve these problems, in this study, a full-bridge LLC (FBLLC) resonant converter with two operation modes, namely full-bridge operation and frequency doubler operation, is proposed for wide voltage gain range application. The FBLLC converter discussed in this study can be designed in half of the input voltage range when compared with the conventional method, so smaller switching frequency operating range and higher efficiency operation are guaranteed. In addition, the smooth mode transition is achieved by introducing switching frequency feedforward control and small output voltage overshoot or undershoot is observed. A 150 W experimental prototype was built to validate the theoretical analysis. [ABSTRACT FROM AUTHOR]

The LLC resonant converters commonly adopt frequency modulation (FM) or combination of FM with phase-shift modulation to regulate its output voltage. However, in these control schemes, a variable switching frequency range is required, which makes the magnetic components design complicated. Therefore, in this article, magnetic control (or variable inductor control) is adopted to make the converter operating at constant switching frequency and constant duty cycle. The fundamental harmonic analysis is commonly used because of its characteristic of simplicity. However, the accuracy of this method is reduced and considerable errors occur when the switching frequency or output power changes. Therefore, an optimal design methodology based on time-domain analysis of the LLC resonant converter with magnetic control is proposed in this article. The proposed methodology can assure that the converter will operate in PO or OPO modes within the whole operating range, and zero voltage switching operation for primary switches and zero current switching operation for secondary rectifier will be guaranteed. In addition, by limiting the resonant tank root-mean-square current, the system efficiency is improved. A 200-W experimental prototype is built and the effectiveness of the proposed optimal design methodology is verified. [ABSTRACT FROM AUTHOR]

In this paper, a dual half-bridge LLC resonant converter with magnetic control is proposed for the battery charger application. The primary switches are shared by two LLC resonant networks, and their outputs are connected in series. One of the LLC resonant converters is designed to operate at the series resonant frequency, which is also the highest efficiency operating point, and the constant output voltage characteristic is achieved at this operating point. The second LLC resonant converter adopts magnetic control to regulate the total output current and voltage during both constant current charge mode and constant voltage charge mode. Meanwhile, the function decoupling idea is adopted to further improve the system efficiency. The significant amount of the power is handled by the LLC resonant converter operating at the series resonant frequency, whereas the second LLC resonant converter fulfills the responsibility to achieve closed-loop control. By carefully designing the resonant networks, the zero-voltage switching for primary switches and zero-current switching for secondary diodes can be achieved for whole operation range. A 320-W experimental prototype is built to verify the theoretical analysis, and the maximum efficiency is measured about 95.5%. [ABSTRACT FROM AUTHOR]