Search

Thin-film transparent heaters (TFTHs) are gaining popularity in optoelectronics and a variety of domestic applications, including smart windows, car defrosters, and other devices. The deposition and characterization of TFTHs made of gallium-doped zinc oxide (GZO) are presented in this work. GZO thin films were deposited via pulsed laser deposition on glass substrates with varying oxygen partial pressures from 0 to 10 mTorr during deposition. The samples demonstrated very low sheet resistance values between 5 and 17 Ω/sq from 0 to 10 mTorr, respectively. UV/vis transmission spectra revealed that TFTHs have a high optical transparency above 80%. GZO-based TFTHs demonstrated a consistent and repeatable joule heating effect, with temperatures reaching 76 °C with a low input voltage of 10 V. This research could guide the future use of GZO as a transparent conducting oxide material for many potential cost-effective applications from low-powered electronics to lightweight and wearable devices. [ABSTRACT FROM AUTHOR]

The addition of suitable metallic dopants into the indium or zinc oxide matrix is essential to obtain transparent conducting oxide (TCO) thin films for high-performance optoelectronics devices. However, scarcity of indium is one of the major challenges for the common use of indium doped tin oxide (ITO) as a TCO material for future state-of-the-art devices. To overcome the challenge, doped zinc oxide is used an alternative material for traditional ITO and retains both high transparency and electrical conductivity. One such potential material is gallium-doped zinc oxide (GZO). GZO thin films were deposited onto glass as well as Kapton substrates using the pulsed laser deposition technique. Structural, optical, and electro-thermal properties of these films were studied to assess the performance of the films as thin-film transparent heaters. The samples show a good transmittance value greater than 85% in the visible range of the electromagnetic spectrum. At room temperature, the electrical resistivity of GZO films showed a value of 110.46 × 10−4 Ω cm on glass and 2.90 × 10−4 Ω cm on the Kapton substrate, followed by a Joule heating effect, with temperatures reaching more than 120 °C at an applied voltage of ∼12 V. This high transparency, cost-effectiveness, low sheet resistance, and small surface roughness make GZO a unique and potential candidate for various practical applications not only as a transparent electrode but also as an indium free thin-film transparent heater and an affordable transparent conducting oxide in displays. [ABSTRACT FROM AUTHOR]

We report the electrothermal properties of AAA trilayer on polyethylene terephthalate substrate which allowed the development of low-cost high-performance transparent thin-film flexible heater (TTFFH) using RF magnetron sputtering. The structural, electrical, and optical properties of the AAA trilayer were investigated at different thickness of the Ag interlayer. The AAA trilayer-based TTFFH yielded saturation temperatures beyond 100 °C at 10 V at optimized Ag interlayer thickness of 5 nm. The time-dependent temperature profile along with its highly stable and reversible thermal behavior was studied. Most importantly, the AAA trilayer-based TTFFH provides a high-performance alternative to the conventional and expensive ITO electrodes at a much lower cost. [ABSTRACT FROM AUTHOR]