Search

Sea ice motion (SIM) has significant implications for sea–air interactions, thermohaline circulation, and the development of the Arctic passage. This research proposes an improved SIM retrieval method from Fengyun-3D's (FY-3D) microwave radiometer imager's (MWRI) brightness temperature (Tb) data based on the modified classical maximum cross-correlation (MCC) method and the multisource data merging method. This study utilized buoy data to establish the search area range, applied distinct thresholds across various Arctic regions, and merged the buoy data, reanalysis wind data, and SIM retrieved from FY-3D/MWRI Tb data. In 2019, for the final Arctic SIM results retrieved from the MWRI 89 GHz and 36.5 GHz Tb data, the root-mean-square error (RMSE) and the mean average error (MAE) in the east–west direction were 2.07 cm/s and 1.38 cm/s and those in the north–south direction were 1.96 cm/s and 1.15 cm/s, compared to the ice-tethered profiler (ITP) data. Compared with the daily average data of the National Snow and Ice Data Center (NSIDC), the RMSE and MAE of the SIM results obtained in this study were 0.74 cm/s and 0.93 cm/s in the east–west direction, and 0.56 cm/s and 0.72 cm/s in the north–south direction, respectively. The monthly average of the SIM retrieved from the MWRI Tb data in this research also showed a good agreement with the monthly average of the NSIDC SIM product. The comparison showed that the MWRI Tb data could be used to retrieve the Arctic SIM, and the Arctic SIM retrieval method presented in this paper was accurate and general. [ABSTRACT FROM AUTHOR]

Using L-band microwave radiative transfer theory to retrieve ice and snow parameters is one of the focuses of Arctic research. At present, due to limitations of frequency and substrates, few operational microwave radiative transfer models can be used to simulate L-band brightness temperature (TB) in Arctic sea ice. The snow microwave radiative transfer (SMRT) model, developed with the support of the European Space Agency in 2018, has been used to simulate high-frequency TB in polar regions and has obtained good results, but no studies have shown whether it can be used appropriately in the L-band. Therefore, in this study, we systematically evaluate the ability of the SMRT model to simulate L-band TB in the Arctic sea ice and snow environment, and we show that the results are significantly optimized by improving the simulation method. In this paper, we first consider the thermal insulation effect of snow by adding the thermodynamic equation, then use a reasonable salinity profile formula for multi-layer model simulation to solve the problem of excessive L-band penetration in the SMRT single-layer model, and finally add ice lead correction to resolve the large influence it has on the results. The improved SMRT model is evaluated using Operation IceBridge (OIB) data from 2012 to 2015 and compared with the snow-corrected classical L-band radiative transfer model for Arctic sea ice proposed in 2010 (KA2010). The results show that the SMRT model has better simulation results, and the correlation coefficient (R) between SMRT-simulated TB and Soil Moisture and Ocean Salinity (SMOS) satellite TB is 0.65, and the RMSE is 3.11 K. Finally, the SMRT model with the improved simulation method is applied to the whole Arctic from November 2014 to April 2015, and the simulated R is 0.63, and the RMSE is 5.22 K. The results show that the SMRT multi-layer model is feasible for simulating L-band TB in the Arctic sea ice and snow environment, which provides a basis for the retrieval of Arctic parameters. [ABSTRACT FROM AUTHOR]

Sea ice type classification is of great significance for the exploration of waterways, fisheries, and offshore operations in the Arctic. However, to date, there is no multiple remote sensing method to detect sea ice type in the Arctic. This study develops a multiple sea ice type algorithm using the HaiYang-2B Scatterometer (HY-2B SCA). First, the parameters most applicable to classify sea ice type are selected through feature extraction, and a stacking model is established for the first time, which integrates decision tree and image segmentation algorithms. Finally, multiple sea ice types are classified in the Arctic, comprising Nilas, Young Ice, First Year Ice, Old Ice, and Fast Ice. Comparing the results with the Ocean and Sea Ice Satellite Application Facility (OSI-SAF) Sea Ice Type dataset (SIT) indicates that the sea ice type classified by HY-2B SCA (Stacking-HY2B) is similar to OSI-SAF SIT with regard to the changing trends in extent of sea ice. We use the Copernicus Marine Environment Monitoring Service (CMEMS) high-resolution sea ice type data and EM-Bird ice thickness data to validate the result, and accuracies of 87% and 88% are obtained, respectively. This indicates that the algorithm in this work is comparable with the performance of OSI-SAF dataset, while providing information of multiple sea ice types. [ABSTRACT FROM AUTHOR]

The Arctic region plays an important role in the global climate system. To promote the application of Medium Resolution Spectral Imager-II (MERSI-II) data in the ice surface temperature (IST) inversion, we used the thermal infrared channels (channels 24 and 25) of the MERSI-II onboard Chinese FY-3D satellite and the thermal infrared channels (channels 31 and 32) of the Earth Observing System (EOS) Moderate-Resolution Imaging Spectroradiometer (MODIS) onboard the National Aeronautical and Space Administration (NASA) Aqua satellite for data analysis. Using the Observation–Observation cross-calibration algorithm to cross-calibrate the MERSI and MODIS thermal infrared brightness temperature (Tb) data in the Arctic, channel 24 and 25 data from the FY-3D/MERSI-II on Arctic ice were evaluated. The thermal infrared Tb data of the MERSI-II were used to retrieve the IST via the split-window algorithm. In this study, the correlation coefficients of the thermal infrared channel Tb data between the MERSI and MODIS were >0.95, the mean bias was −0.5501–0.1262 K, and the standard deviation (Std) was <1.3582 K. After linear fitting, the MERSI-II thermal infrared Tb data were closer to the MODIS data, and the bias range of the 11 μm and 12 μm channels was −0.0214–0.0119 K and the Std was <1.2987 K. These results indicate that the quality of the MERSI-II data is comparable to that of the MODIS data, so that can be used for application to IST inversion. When using the MERSI thermal infrared Tb data after calibration to retrieve the IST, the results of the MERSI and MODIS IST were more consistent. By comparing the IST retrieved from the MERSI thermal infrared calibrated Tb data with MODIS MYD29 product, the mean bias was −0.0612–0.0423 °C and the Std was <1.3988 °C. Using the MERSI thermal infrared Tb data after calibration is better than that before calibration for retrieving the IST. When comparing the Arctic ocean sea and ice surface temperature reprocessed data (L4 SST/IST) with the IST data retrieved from MERSI, the bias was 0.9891–2.7510 °C, and the Std was <3.5774 °C. [ABSTRACT FROM AUTHOR]