Search

Light availability and habitat complexity are two key drivers of community assembly. Urbanisation has been shown to affect both, with important consequences to ecological communities. On the intertidal, for instance, studies have shown that light intensity is greater on natural rocky shores than on less complex artificial habitats (seawalls), though different habitats can also experience similar light intensities, for example when shaded by urban structures. Understanding therefore how these factors individually, and combined, affect communities is important to understand the mechanisms driving changes in community structure, and consequently provide solutions to tackle the increasing homogenisation of habitats and lightscapes in urbanised spaces through smart infrastructure designs. Here, we assessed how different light levels affect the recruitment of communities in rock pools and on emergent rock on an intertidal rocky shore. We cleared 30 patches of emergent rock and 30 rock pools and manipulated light using shades with different light transmissions (full light, procedural control, 75%, 35%, and 15% light transmission, full shade) and assessed mobile and sessile communities monthly for 6 months. Effects of reducing light levels were generally stronger on rock than in pools. Fully shaded plots supported double the amount of mobile organisms than plots in full sunlight, in both habitats. Algal cover was higher in pools compared to rock, and at intermediate light levels, but effects varied with site. This study highlights the importance of variable light conditions and different habitats for rocky shore communities, which should be considered in future coastal developments to retain natural biodiversity., (© 2024. The Author(s).)

Plastic pollution poses environmental and socio-economic risks, requiring policy and management interventions. The evidence-base for informing management and evaluation of their effectiveness is limited. Partnerships with citizen scientists provide opportunities to increase the spatio-temporal scale of monitoring programs, where training and standardised protocols provides opportunities for the use of data in addressing multiple hypotheses. Here, we provide a baseline of debris trends and infer debris drivers of abundance across 18° of latitude, using 168 surveys from 17 beaches across Queensland, Australia through the ReefClean project. Plastics were the dominant material (87% of total debris, with hard, soft and foam plastics aggregated), although linking recovered debris to sources was limited, as 67% of items were fragmented. We tested potential drivers of specific debris types (i.e., plastics, commercial fishing items, items dumped at-sea, and single-use items) and identified significant relationships between debris accumulation with distance from the nearest population centre and site characteristics (modal beach state, beach orientation and across-beach section). Management efforts should consider beach type and orientation within site selection, as an opportunity to maximise the amount recovered, alongside other criteria such as the risks posed by debris on environmental, economic, and social values. This study demonstrates the utility of citizen science to provide baselines and infer drivers of debris, through data gathered at scales that are infeasible to most formal monitoring programs. The identified drivers of debris may also differ from regional and global studies, where monitoring at relevant scales is needed for effective management., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Heidi Tait reports financial support was provided by Australian Government Department of Climate Change Energy the Environment and Water., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Novel combinations of climatic conditions due to climate change and prolonged fire seasons have contributed to an increased occurrence of "megafires". Such large-scale fires pose an unknown threat to biodiversity due to the increased extent and severity of burn. Assessments of wildfires often focus on terrestrial ecosystems and effects on aquatic habitats are less documented, particularly in coastal environments. In a novel application of eDNA techniques, we assessed the impacts of the 2019-2020 Australian wildfires on the diversity of estuarine benthic sediment communities in six estuaries in NSW, Australia, before and after the fires. Estuaries differed in area of catchment burnt (0-92%) and amount of vegetative buffer that remained post-fire between burnt areas and waterways. We found greater dissimilarities in the composition and abundance of eukaryotic and bacterial sediment communities in estuaries from burnt catchments with no buffer compared to those with an intact buffer or from unburnt catchments. Shifts in composition in highly burnt catchments were associated with increased concentrations of nutrients, carbon, including fire-derived pyrogenic carbon, and copper, which was representative of multiple highly correlated trace metals. Changes in the relative abundances of certain taxonomic groups, such as sulfate-reducing and nitrifying bacterial groups, in the most impacted estuaries indicate potential consequences for the functioning of sediment communities. These results provide a unique demonstration of the use of eDNA to identify wildfire impacts on ecological communities and emphasize the importance of vegetative buffers in limiting wildfire-associated impacts., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Anthropogenic marine debris is a persistent threat to oceans, imposing risks to ecosystems and the communities they support. Whilst an understanding of marine debris risks is steadily advancing, monitoring at spatial and temporal scales relevant to management remains limited. Citizen science projects address this shortcoming but are often critiqued on data accuracy and potential bias in sampling efforts. Here we present 10-years of Australia's largest marine debris database - the Australian Marine Debris Initiative (AMDI), in which we perform systematic data filtering, test for differences between collecting groups, and report patterns in marine debris. We defined five stages of data filtering to address issues in data quality and to limit inference to ocean-facing sandy beaches. Significant differences were observed in the average accumulation of items between filtered and remaining data. Further, differences in sampling were compared between collecting groups at the same site (e.g., government, NGOs, and schools), where no significant differences were observed. The filtering process removed 21% of events due to data quality issues and a further 42% of events to restrict analyses to ocean-facing sandy beaches. The remaining 7275 events across 852 sites allowed for an assessment of debris patterns at an unprecedented spatial and temporal resolution. Hard plastics were the most common material found on beaches both nationally and regionally, consisting of up to 75% of total debris. Nationally, land and sea-sourced items accounted for 48% and 7% of debris, respectively, with most debris found on the east coast of Australia. This study demonstrates the value of citizen science datasets with broad spatial and temporal coverage, and the importance of data filtering to improve data quality. The citizen science presented provides an understanding of debris patterns on Australia's ocean beaches and can serve as a foundation for future source reduction plans., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. The authors would like to acknowledge that Heidi Tait and Wally Smith are responsible for the coordination of the database used within this study., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Sea-level rise is an inevitable consequence of climate change and threatens coastal ecosystems, particularly intertidal habitats that are constrained by landward development. Intertidal habitats support significant biodiversity, but also provide natural buffers from climate-threats such as increased storm events. Predicting the effects of climate scenarios on coastal ecosystems is important for understanding both the degree of habitat loss for associated ecological communities and the risk of the loss of coastal buffer zones. We take a novel approach by combining remote sensing with the IUCN Red List of Ecosystem criteria to assess this impact. We quantified the extent of horizontal intertidal rocky shores along ~200 km of coastline in Eastern Australia using GIS and remote-sensing (LiDAR) and used this information to predict changes in extent under four different climate change driven sea-level rise scenarios. We then applied the IUCN Red List of Ecosystems Criterion C2 (habitat degradation over the next 50 years based on change in an abiotic variable) to estimate the status of this ecosystem using the Hawkesbury Shelf Marine Bioregion as a test coastline. We also used four individual rocky shores as case studies to investigate the role of local topography in determining the severity of sea-level rise impacts. We found that, if the habitat loss within the study area is representative of the entire bioregion, the IUCN status of this ecosystem is 'near threatened', assuming that an assessment of the other criteria would return lower categories of risk. There was, however, high spatial variability in this effect. Rocky shores with gentle slopes had the highest projected losses of area whereas rocky shores expanding above the current intertidal range were less affected. Among the sites surveyed in detail, the ecosystem status ranged from 'least concern' to 'vulnerable', but reached 'endangered' under upper estimates of the most severe scenario. Our results have important implications for conservation management, highlighting a new link between remote sensing and the IUCN Red List of Ecosystem criteria that can be applied worldwide to assess ecosystem risk to sea-level rise., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Habitat complexity is accepted as a general mechanism for increasing the abundance and diversity of communities. However, the circumstances under which complexity has the strongest effects are not clear. Over 20 degrees of Australia's east coast, we tested whether the effects of within-site structural habitat complexity on the diversity and community structure of sessile marine invertebrates was consistent over a latitudinal gradient where environmental conditions and species composition vary. We used experimental arrays with varied structural treatments to detect whether community cover, species richness, diversity and community composition (β-diversity) changed with increasing complexity. Community response to complexity varied over latitude due to differences in species richness and community development. Increased complexity had the greatest positive effects on community cover and species richness at higher latitudes where recruitment and growth were low. At lower latitudes, community cover and species richness were higher overall and did not vary substantially between complexity treatments. Latitudinal variation in within-treatment β-diversity relative to complexity further suggest divergent community responses. At higher latitudes, increased similarity in more complex treatments suggests community dominance of successful taxonomic groups. Despite limited effects on species richness and community cover at lower latitudes, β-diversity was higher in more complex treatments, signifying potential positive effects of increased complexity at these sites. These results demonstrate the context-dependency of complexity effects in response to variation in species richness and community development and should be taken into consideration to help direct conservation and restoration efforts., (© 2018 by the Ecological Society of America.)

Complexity in physical habitats may modify predation pressure by allowing differential access of predators to prey. Rocky subtidal environments are inherently complex with many cryptic micro habitats, such as overhangs and crevices. Here, we examine the influence of habitat complexity in mediating predation on sessile assemblage structure by experimentally manipulating fish access to a range of crevice orientations and sizes. Nine fish species/families were recorded actively feeding within crevices, but australian mado, eastern stripey, wrasses and sawtail surgeon accounted for almost 70% of all entries. Sessile assemblages were influenced by crevice width, fish predation and surface orientation, with more predation activity in larger crevices. Assemblage similarity on upward facing surfaces decreased as crevice width increased. While assemblage structure on downward and vertical surfaces was influenced by crevice width and caging separately. Thus, crevice size and orientation are important habitat complexity features that act to partition predation pressure. This may allow distinct sessile assemblages to persist, even when predation can be intense., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Microplastics and fibres occur in high concentrations along urban coastlines, but the occurrence of microplastic ingestion by fishes in these areas requires further investigation. Herein, the ingestion of debris (i.e., synthetic and natural fibres and synthetic fragments of various polymer types) by three benthic-foraging fish species Acanthopagrus australis (yellowfin bream), Mugil cephalus (sea mullet) and Gerres subfasciatus (silverbiddy) in Sydney Harbour, Australia has been quantified and chemically speciated by vibrational spectroscopy to identify the polymer type. Ingested debris were quantified using gut content analysis, and identified using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and Raman microspectroscopies in combination with principal component analysis (PCA). The occurrence of debris ingestion at the time of sampling ranged from 21 to 64% for the three species, and the debris number ranged from 0.2 to 4.6 items per fish for the different species, with ∼53% of debris being microplastic. There was a significant difference in the amount of debris ingested among species; however, there was no difference among species when debris counts were standardised to fish weight or gut content weight, indicating that these species ingest a similar concentration of debris relative to their ingestion rate of other material. ATR-FTIR microspectroscopy successfully identified 72% of debris. Raman spectroscopy contributed an additional 1% of successful identification. In addition, PCA was used to non-subjectively classify the ATR-FTIR spectra resulting in the identification of an additional 9% of the debris. The most common microplastics found were polyester (PET), acrylic-polyester blend, and rayon (semi-synthetic) fibres. The potential of using Raman microspectroscopy for debris identification was investigated and provided additional information about the nature of the debris as well as the presence of specific dyes (and hence potential toxicity)., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Strategies for managing biological invasions are often based on the premise that characteristics of invading species and the invaded environment are key predictors of the invader's distribution. Yet, for either biological traits or environmental characteristics to explain distribution, adequate time must have elapsed for species to spread to all potential habitats. We compiled and analyzed a database of natural history and ecological traits of 138 coastal marine invertebrate species, the environmental conditions at sites to which they have been introduced, and their date of first introduction. We found that time since introduction explained the largest fraction (20%) of the variability in non-native range size, while traits of the species and environmental variables had significant, but minimal, influence on non-native range size. The positive relationship between time since introduction and range size indicates that non-native marine invertebrate species are not at equilibrium and are still spreading, posing a major challenge for management of coastal ecosystems.

Multi-use marine parks achieve conservation through spatial management of activities. Zoning of marine parks in New South Wales, Australia, includes high conservation areas and special purpose zones (SPZ) where maritime activities are concentrated. Although such measures geographically constrain anthropogenic impacts, we have limited understanding of potential ecological effects. We assessed sediment communities and contaminants adjacent to boating infrastructure (boat ramps, jetties and a marina) in a SPZ from the Clyde Estuary in Batemans Marine Park. Metal concentrations and fines content were elevated at boating structures compared to reference sites. Species richness was higher at sites with boating structures, where capitellid polychaetes and nematodes dominated the communities. Changes associated with boating structures were localised and did not extend beyond breakwalls or to reference sites outside the SPZ. The study highlights the benefits of appropriate zoning in a multi-use marine park and the potential to minimise stress on pristine areas through the application of spatial management.

Anthropogenic modifications to waterways are common and their ecological consequences must be understood to effectively conserve local biodiversity. The facilitation of recreational boating activities often requires substantial alteration of natural areas, however the environmental and ecological consequences of such alterations are rarely described in the scientific literature. In this study, ecological and physico-chemical conditions were investigated in a recreational boating marina, located inside a marine park on the south-east coast of Australia. Recruitment panels were deployed for 8 weeks both inside and outside the marina, and differences in the composition of the developing fouling communities were observed. The recruitment of taxa, which often have short-lived larvae, was increased inside the marina (bryozoans, spirorbids and sponges) while the recruitment of taxa, which often have longer-lived larvae, was reduced or absent (barnacles, solitary ascidians and non-spirorbid polychaetes). Differences were also observed in environmental conditions inside the marina cf. directly outside. The marina environment had higher turbidity, temperature and pH along with higher concentrations of lead and copper in suspended sediments, while flow rates and trapped sediment loads were reduced inside the marina. The differences observed in the study suggest that there may be marked environmental changes associated with marina developments. The potential ecological consequences of these changes should be a primary consideration during the planning process, particularly for developments in locations of notable ecological value.

Biomonitors are commonly used to assess levels of bioavailable contaminants in the environment, however the relationships between biomonitor tissue concentrations and ecological effects are rarely assessed. The present study investigated metal contamination within a highly industrialised harbour and ecological effects on sessile invertebrates. The native oyster Saccostrea glomerata was deployed as a biomonitor across twenty-six sites to test for correlations between metal levels in their tissues and the recruitment of hard-substrate invertebrates. Concentrations of lead and copper in oyster tissues were negatively correlated with densities of the dominant barnacle, Amphibalanus variegatus, and positively correlated with densities of the dominant polychaete, Hydroides elegans, and the two native encrusting bryozoans Celloporaria nodulosa and Arachnopusia unicornis. Results suggest that highly localised events drive contaminant availability and that these events pose a significant risk to fauna. Biomonitoring studies may be enhanced by running concurrent ecological surveys., (This journal is © The Royal Society of Chemistry 2012)

Anthropogenic stresses such as metal contamination can have profound ecological impacts in a wide range of habitats. Reduced survival of organisms in contaminated habitats has the potential to result in the evolution of genotypes tolerant to deleterious contaminants. Local adaptation to contamination requires directional selection, genetic variation in traits relating to tolerance, spatial variability in exposure to the contaminant and limited gene flow between populations. This study assesses variation in tolerance in the herbivorous marine invertebrate Peramphithoe parmerong whose algal diets in Sydney Harbour readily accumulate the metal copper. A quantitative genetics approach (a full-sib, split family design) was used to quantify variation among families in survival on the contaminated diet. A significant genotype-by-environment interaction in offspring survival between the copper contaminated and uncontaminated diet treatments revealed variation in tolerance to copper by P. parmerong. Amphipods that survived 30 days of exposure to copper contaminated diets were slightly smaller and ate less algae than those reared on uncontaminated food. This reflects an additional sub-lethal effect associated with the consumption of contaminated algae. However, there was no evidence of acclimation to contaminated diets, nor a cost of reduced feeding for those genotypes with increased tolerance. This study provides strong evidence for the potential of a marine invertebrate to evolve tolerance to contaminants found in their diet., (Copyright 2010 Elsevier B.V. All rights reserved.)

We determined metal contents of co-occurring algae Padina crassa and Sargassum sp. in Port Jackson (Australia), and relationships between metal levels and the abundance of epifaunal amphipods. Copper, lead and zinc concentrations were amongst the highest yet recorded in these algae. Copper, manganese and lead concentrations were far greater in P. crassa than Sargassum sp., possibly due to the low growth of P. crassa in proximity to contaminated sediments. However, in manipulative experiments the proximity of algae to sediments did not explain these differences. The abundance of herbivorous amphipods correlated negatively with the copper content of P. crassa, but not with the lower concentrations in Sargassum sp. The greater contamination of P. crassa led to patchy distributions of metals in algal beds and recolonisation experiments showed Sargassum sp. acts as a refuge from contaminants for epifauna. The contamination of macroalgae may pose threats to epifauna in harbours around the world.

Vessel hull fouling is a major vector for the translocation of nonindigenous species (NIS). Antifouling (AF) paints are the primary method for preventing the establishment and translocation of fouling species. However, factors such as paint age, condition and method of application can all reduce the effectiveness of these coatings. Areas of hull that escape AF treatment (through limited application or damage) constitute key areas that may be expected to receive high levels of fouling. The investigation focused on whether small-scale (mm(2) to cm(2)) areas of unprotected surface or experimental 'scrapes' provided sufficient area for the formation of fouling assemblages within otherwise undamaged AF surfaces. Recruitment of fouling taxa such as algae, spirorbids and hydroids was recorded on scrapes as narrow as 0.5 cm wide. The abundance and species richness of fouling assemblages developing on scrapes > or =1 cm often equalled or surpassed levels observed in reference assemblages totally unprotected by AF coatings. Experiments were conducted at three sites within the highly protected and isolated marine park surrounding Lady Elliott Island at the southernmost tip of the Great Barrier Reef, Australia. Several NIS were recorded on scrapes of AF coated surfaces at this location, with 1-cm scrapes showing the greatest species richness and abundance of NIS relative to all other treatments (including controls) at two of the three sites investigated. Slight disruptions to newly antifouled surfaces may be all that is necessary for the establishment of fouling organisms and the translocation of a wide range of invasive taxa to otherwise highly protected marine areas.