Search

The objective of this paper is to summarize recent trends related to industrial kiln drying with especial emphasis on the drying of softwood dimension lumber in Canada. The paper explores future trends by analyzing the current market condition and wood products requirements. The paper also summarizes current research developments in the area of kiln lumber drying that was published by Canadian universities and research institutes. This includes basic research, such as wood physics and computer simulation, and applied research, such as non-conventional drying strategies and new technologies and sensors. A last note is also included to mention a kiln supervisor tool that was developed in Canada to analyze information related to kiln performance indicators. The kiln supervisor provides important trends for mills aiming to optimize their drying processes and realize gains without substantial investments in capital and other resources. [ABSTRACT FROM PUBLISHER]

A Lumber Quality Model developed to predict lumber grade after drying was applied and validated in industry. The model was calibrated with a 198-piece lumber package that was dried at a local sawmill in British Columbia, Canada, and 30 sawmill grade reports were recorded from 2008 to 2010. The calibrated model was then used to predict the target moisture content that would result in the maximum lumber value. It was predicted that lumber value should increase by approximately 17 CAD (Canadian dollars) m−3 if the target moisture content were reduced from the historic 17% to an optimum of approximate 13%. The sawmill implemented the recommendations and the predictions were validated with another seven industrial drying runs. [ABSTRACT FROM AUTHOR]

While a few years ago the cost and availability of energy was not an important issue for the Canadian lumber industry, this situation has recently changed. Today, companies that have operated trouble-free for many years using the same technologies and practices may now have to adapt to the rising cost of fossil fuels and concerns about greenhouse gas emissions. This article addresses this problem for the particular case of the softwood lumber industry. The study describes the most important sources of energy losses in conventional drying and proposes a number of strategies and technologies to reduce kiln energy demand. [ABSTRACT FROM AUTHOR]