Search

In the late Qing Dynasty, religious periodicals by Western missionaries were made legal in China, and subsequently became an important manner of their missionary cause. Among them, Child's Paper 小孩月报 (1875–1881) by John Marshall Willoughby Farnham, a Protestant missionary from the United States, endeavoured to convert child readers by carrying children's stories of moral and emotional education. By concentrating on the educational elements of Child's Paper, this article inspects how conversion was achieved via the intertextual interpretation of Christian doctrines within these educational elements. Specifically, how the image of little Christians and urchins, respectively, represents salvation and redemption in Christian morals. This article holds that the missionaries' stress on the authority of Christian discourse in the education of Chinese children makes evident an increasing emphasis on the reformative effects of Christianity on Chinese children. Moreover, the conversion-education efforts by missionaries also construed helping Chinese children gain a cross-cultural perspective on Western religion, and arguably inspired later Chinese intellectuals' to create newspapers for the purpose of the pre-primary education of Chinese children. [ABSTRACT FROM AUTHOR]

The relationship between environmental regulation and firm productivity has been widely debated but inconsistencies in findings across different studies. Using detailed firm-level micro-data from 2000 to 2007, this paper employs difference-in-difference combined with matching based on entropy balancing method to explore the effect of environmental regulation on firm total factor productivity (TFP) in pulp and paper industry in China. Our main findings are as following: Firstly, stricter environmental regulation, as represented by the Wastewater Discharge Standards for Pulp and Paper Industry in Shandong province, increases firm TFP significantly. Moreover, the coefficients of interest are robust to multiple robustness checks. Secondly, dynamic effects estimates reveal that when faced with this phase-in environmental regulation, firms take the foreseeably increasing strictness into account from the very beginning and prefer to take one-step adjustment to reach full compliance. Thirdly, potential mechanism analysis finds that the positive effect mainly comes from the improvement of resource allocation efficiency within firms. Fourthly, the heterogeneity test indicates that the effect of environmental regulation on firm TFP is heterogeneous across firms with different sizes, ages, ownerships, capital intensity, and export status. Finally, this paper provides convincing and insightful evidence that environmental regulation has the potential to achieve the dual goals of environmental sustainability and economic growth and is thus of broader significance for understanding the enforcement of environmental regulation in developing countries. [ABSTRACT FROM AUTHOR]

Congestion is a well-known economic phenomenon in which excessive inputs lead to a decrease in the maximum possible outputs. This study analyzes the relationship between congestion and overinvestment using a data envelopment analysis framework to reveal that some congestion can be eliminated by increasing inputs. The proposed approach classifies congestion into two categories, relative and absolute congestion, depending on the possibility of eliminating congestion by increasing inputs. Corresponding methods for identifying and measuring congestion are proposed and employed for empirical analyses examining China's papermaking and paper products industry. We find that most congestion in 2013–2016 is in the relative congestion and could be eliminated by increasing inputs. The primary causes of congestion are identified based on our analysis and corresponding policy suggestions are proposed for eliminating congestion. [ABSTRACT FROM AUTHOR]

The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products (n F 2n+1 COOH. Microwave heating can increase the release of PFAS in popcorn bags and convert long-chain PFAS into short-chain ones. The migration experiments indicated that the ethanol in food simulants can increase the migration of PFAS, and short-chain PFAS exhibits a greater migration trend. The estimated daily intake (EDI) values for 6 of 18 paper bowls/plates exceeded the recommendation of 0.63 ng/kg bw/day by the European Food Safety Authority (EFSA), posing a potential threat to human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Paper was one of the greatest inventions in ancient China, and it greatly promoted the rapid development of human civilization. Even in today's electronic information age, paper and paper‐derived products are still indispensable to people's daily work and life. However, the traditional paper based on cellulose fibers from plants has some problems. For instance: (1) papermaking consumes a large amount of precious natural resources such as trees; (2) the papermaking industry causes environmental pollution; (3) the traditional paper consisting of organic cellulose fibers is highly flammable and easy to burn; (4) the traditional paper based on cellulose fibers turns to yellow color with time; (5) the lifetime of the traditional paper is relatively short because of the degradation of cellulose fibers. More efforts are needed to investigate and solve these problems facing the traditional paper. In recent years, a new kind of multifunctional fire‐resistant paper based on ultralong hydroxyapatite nanowires has been developed and investigated for various applications, and many research findings have been documented in the literature. This review article provides a comprehensive summary and discussion on recent research advances for this new kind of multifunctional fire‐resistant paper based on ultralong hydroxyapatite nanowires, including the synthesis, properties, applications, and future perspectives. [ABSTRACT FROM AUTHOR]

Integrating science learning with game experience and physical manipulatives not only overcomes the rigidity of traditional teaching, but also makes the learning experience pleasant for students and improves their science inquiry ability. Today, with the popularization of mobile devices and technology, both the value and feasibility of gamified science learning have increased significantly. However, several studies showed that students might get lost or feel bored during science inquiry. To let students enjoy the science inquiry process and improve their science process skills, the researchers combined mobile technology, game design elements, and science inquiry and designed the gamified science inquiry activity "we are aircraft designers". Here, students designed and manipulated a smartphone-controlled paper airplane by mobile devices connected via Bluetooth. To investigate the effects of the gamified science inquiry activity, the flow state and science process skills of 71 students of a junior high school in China were explored. The proposed gamified science inquiry activity enhanced flow and science process skills of students with high and middle level flow. No differences were found on flow and science process skills between males and females. Based on these results, the guidelines for the design of a gamified science inquiry activity are discussed.

"Paper mills" are unethical outsourcing agencies proficient in fabricating fraudulent manuscripts submitted to scholarly journals. In earlier years, the activity of such companies involved plagiarism, but their processes have gained complexity, involving the fabrication of images and fake results. The objective of this study is to examine the main features of retracted paper mills' articles registered in the Retraction Watch database, from inception to the present, analyzing the number of articles per year, their number of citations, and their authorship network. Eligibility criteria for inclusion: retracted articles in any language due to paper mill activity. Retraction letters, notes, and notices, for exclusion. We collected the associated citations and the journals' impact factors of the retracted papers from Web of Science (Clarivate) and performed a data network analysis using VOSviewer software. This scoping review complies with PRISMA 2020 statement and main extensions. After a thorough analysis of the data, we identified 325 retracted articles due to suspected operations published in 31 journals (with a mean impact factor of 3.1). These retractions have produced 3708 citations. Nearly all retracted papers have come from China. Journal's impact factor lower than 7, life sciences journals, cancer, and molecular biology topics were common among retracted studies. The rapid increase of retractions is highly challenging. Paper mills damage scientific research integrity, exacerbating fraud, plagiarism, fake images, and simulated results. Rheumatologists should be fully aware of this growing phenomenon. [ABSTRACT FROM AUTHOR]

Accompanying China's accession to the World Trade Organization, the rapid development of the Chinese economy has led to increasingly serious environmental issues. However, the inherent mechanisms underlying the impact of Environmental Information Disclosure (EID) policy and trade on the environmental effects of Chinese paper enterprises remain unclear in the context of the era's requirement for a resource-conserving and environmentally-friendly society. The pollution problem in the papermaking industry has received attention worldwide, and how to balance the environmental and development issues of papermaking enterprises is an urgent issue that needs to be solved in the academic community. This study explores the impact mechanisms of EID policy and trade on the environmental effects of enterprises from the perspective of financial constraints. Utilizing the PSM-DID model, the study investigates the moderating effects of financial constraints on the EID policy and import-export trade. The findings reveal that both external and internal financial constraints have negative, detrimental effects on the environmental effects of the EID policy and trade. These constraints impede research and development investment and technological upgrades, hinder productivity improvement, and hamper the realization of "regulatory and trade innovation effects". This study enriches our understanding of the mechanisms by which trade affects the environmental effects of Chinese paper enterprises and further identifies the impacts of Chinese EID policy and trade on pollution emissions by enterprises, providing a theoretical basis and practical foundation for the government in formulating financial, environmental, and trade policies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Computer-based testing (CBT), which refers to delivering assessments with computers, has been widely used in large English proficiency tests worldwide. Despite an increasing CBT in China, limited research is available concerning whether CBT can be used for the Test for English Majors-Band 4 (TEM 4). The current study investigated whether testing mode impacted TEM 4 score and factors (i.e., computer familiarity level and attitude towards CBT) that might correlate with performance on CBT of TEM 4. Overall 92 Chinese undergraduate students were randomly assigned to one of the groups, i.e., CBT or paper-based testing (PBT), and took the test. A mixed method was employed, including (1) quantitative and qualitative analysis of test performance in two modes, as well as CBT group participants' computer familiarity and attitudes towards the mode; and (2) thematic analysis of semi-structured interviews. The results revealed that (1) test scores in CBT and PBT were comparable; (2) two items in the computer familiarity questionnaire, i.e., comfort level of reading articles on the computer and forgetting time when using computers, positively correlated with CBT scores; and (3) participants' attitude towards CBT did not impact test performance.

Due to the lack of life experience and situational experience, it is difficult to arouse pupils' inner motivation and interest in writing. Therefore, the early stage of Chinese writing may be a challenge for Chinese pupils. In order to solve this problem, a spherical video-based virtual reality (SVVR) experience learning system was developed to help pupils improve their writing performance and interest. To evaluate the effectiveness of the proposed approach, an experiment was carried out in a primary school in Zhejiang province, China. First, a writing pretest was administered in two grade 4 classes. The researchers then randomly selected 40 pupils of about 10 years old with similar writing abilities, and assigned them to an experimental group, which used the SVVR learning method, and a control group, which used the traditional learning method. The researchers observed and recorded the pupils' writing process and then, interviewed them. The results showed that there was a significant difference in the comprehensive writing performance of the two groups (F = 6.272; p = 0.017 < 0.05). The mean of the experimental group (Mean = 73.85) was higher than that of the control group (Mean = 70.00). Moreover, there were significant differences between the two groups in terms of the thematic coherence, structural integrity and linguistic expressiveness of their writing performance. However, there was no significant difference in the achievement of creative thinking. In the experimental group, different levels of learning behavior engagement could affect the structural integrity and language expression of writing achievements, and the degree of writing learning behavior engagement was highly correlated with reading time. Through the interviews, it was found that the pupils in the experimental group were more satisfied with the SVVR learning method than the control group pupils were with the traditional learning method.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

China has been the world's largest producer and consumer of paper products. In the context of the "carbon peaking and carbon neutrality goals", China's papermaking industry which is traditionally a high energy-consuming and high-emissions industry, desperately needs a nationally appropriate low-carbon development path. From the consumption-side perspective, this paper calculates the CO2 emissions of China's papermaking industry from 2000 to 2019 by using carbon emission nuclear algorithm, grain-straw ratio, first-order attenuation method, and STIRFDT decomposition model, etc., to further explore the core stages and basic patterns affecting the industry's carbon peaking. The results show that the total CO2 emissions of China's papermaking industry showed an upward trend from 2000–2013, stable from 2013–2017, and a steady but slight decline from 2017–2019. Meanwhile, the total CO2 emissions of the full life cycle of paper products in China have decreased to a certain extent in the raw material acquisition, pulp, and paper making and shipping stages, with only the waste paper disposal stage showing a particular upward trend. We find that from 2000 to 2019, China's CO2 emissions in the pulping and papermaking stage of paper products accounted for 68% of the total emissions in the whole life cycle, of which 59% was caused by coal consumption. Moreover, the scenario prediction shows that improving the energy structure and increasing the waste paper recovery rate can reduce the CO2 emissions of the industry, and it is more significant when both work. Based on this and the four core stages of CO2 emissions of the papermaking industry we proposed ways to promote CO2 emissions peaking of China's paper products. [ABSTRACT FROM AUTHOR]

The number of retracted papers from Chinese university-affiliated hospitals is increasing, which has raised much concern. The aim of this study is to analyze the retracted papers from university-affiliated hospitals in mainland China from 2000 to 2021. Data for 1,031 retracted papers were identified from the Web of Science Core collection database. The information of the hospitals involved was obtained from their official websites. We analyzed the chronological changes, journal distribution, discipline distribution and retraction reasons for the retracted papers. The grade and geographic locations of the hospitals involved were explored as well. We found a rapid increase in the number of retracted papers, while the retraction time interval is decreasing. The main reasons for retraction are plagiarism/self-plagiarism (n=255), invalid data/images/conclusions (n=212), fake peer review (n=175) and honesty error(n=163). The disciplines are mainly distributed in oncology (n=320), pharmacology & pharmacy (n=198) and research & experimental medicine (n=166). About 43.8% of the retracted papers were from hospitals affiliated with prestigious universities. This study fails to differentiate between retractions due to honest error and retractions due to research misconduct. We believe that there is a fundamental difference between honest error retractions and misconduct retractions. Another limitation is that authors of the retracted papers have not been analyzed in this study. This study provides a reference for addressing research misconduct in Chinese university-affiliated hospitals. It is our recommendation that universities and hospitals should educate all their staff about the basic norms of research integrity, punish authors of scientific misconduct retracted papers, and reform the unreasonable evaluation system. Based on the analysis of retracted papers, this study further analyzes the characteristics of institutions of retracted papers, which may deepen the research on retracted papers and provide a new perspective to understand the retraction phenomenon. [ABSTRACT FROM AUTHOR]

Paper nails constitute a unique and important structure in Chinese double-leaved books. This technique may have existed as early as the Southern Song Dynasty (A.D.1127–1279) when wrapped-back bindings developed. Creating and applying paper nails is a basic skill for conservators in China. Although paper nails have always been used, there is not much literature discussing their manufacture and application. This article details the use of single and double-ended nails in China, including how to make, attach, and remove them, and provides illustrative examples of the role of paper nails in thread binding, rough binding, wrapped-back binding, and "Jade Set in Gold" ("jinxiangyu", 金镶玉) binding. This work will be a reference for the conservation of Chinese double-leaved books and other documents. [ABSTRACT FROM AUTHOR]

Kaihua paper is a type of precious hand-made paper in China that has been used throughout Chinese history. Due to its extraordinary whiteness and fine texture, it was adopted by the imperial palace in the reign of Emperor Kang Xi and Yong Zheng of the Qing Dynasty of China in the 17th and 18th century. It is stained by a special type of yellowish-brown spot after years of storage, which is called a "peachy spot." The formation of such spots remains unclear, although complicated physicochemical processes or microbial activities might be involved. We performed nondestructive sampling and high-throughput sequencing on peachy spot surfaces, unstained areas, and air samples in the stack room to analysis the the bacterial and fungal communities, and performed prediction of functional genes of the bacterial communities. The results showed that peachy spot formation was mainly related to bacterial communities rather than fungal communities. Significantly more potential acid-producing, acidophilic or cellulase-producing bacteria, such as, Streptococcus, Staphylococcus, and Lysinibacillus, and pigment-producing bacteria, such as Methylobacterium and Rubrobacter, were identified in the peachy spot samples. Prediction of the functional genes of the bacterial community also suggested the production of acidic substance pigments. These findings provide new insights into the pigment formation mechanism in ancient paper and open an opportunity to develop new strategies to preserve the ancient paper documents. [ABSTRACT FROM AUTHOR]

A PVA matrix was used to suppress infiltration and coffee-ring effects during colorimetric analysis on a paper substrate and improve the trace-level detection of nickel ions (Ni2+) in environmental samples. To improve the color response, a cross-linked PVA matrix was used to anchor the indicator reagent of Ni2+ on the surface of the porous paper substrate as well as reduce evaporation flow by increasing hydrogen bonding in the sample droplet. These phenomena mitigated the loss of color signal by suppressing infiltration and coffee-ring effects. Under optimized conditions, including crosslinker concentration and addition order, type of commercial filter paper, and loading volume of the PVA/indicator mixture, the sensor obtained a limit of detection (LOD) as low as 0.92 ppm and a notable linear behavior of R2 > 0.97 at a linear range of 0.5–50 ppm, which is sufficient for the detection of legal maximum residue limit (MRL) of Ni2+ in wastewaters in China. The PVA-assisted sensor showed good selectivity to most metal ions and could work at different pH levels ranging from 3 to 9. The sensor also exhibited highly sensitive and stable performance in repetitive measurements and had a shelf-life of more than 3 months. These results suggest that our work provides a facile approach to improving the sensitivity and reliability of paper-based sensors for monitoring trace-level Ni2+ concentration in aqueous samples with good selectivity and prolonged shelf-life. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Much attention has been paid to using English movies in senior high school English teaching in China since the release of 2017 edition of Senior High School English Curriculum Standards that lists English Movie Appreciation as an optional compulsory course. Senior high school teachers have conducted substantial research over the past three years regarding the practical application of English movies in their teaching, yet there has been a lack of thorough and systematic of analysis of the large number of relevant papers published, which, more or less, limits the understanding and further advancements of this study area. This paper attempts, in light of the emerging systematic review methodology, to present an overview of the research papers spanning the period 2019 to 2022 on the use of English movies in Chinese senior high school from the four perspectives: language ability, cultural awareness, thinking quality, and learning ability based on the concept of core literacy of English as an academic discipline in the new curriculum standard. With focus on the discussion of the common problems and corresponding countermeasures that have been sorted out from the works of front-line teachers, the paper also puts forward suggestions and prospects for further studies. [ABSTRACT FROM AUTHOR]

This article traces the history of the relationship of papermaking and paper to libraries over time. Paper was first made in China and is traditionally considered one of that nation's four greatest inventions, along with gun powder, printing, and the compass. Papermaking was often associated with archives in its early development in China, as well as when it was introduced to Japan, where it came to be a part of some Shinto and Buddhist temples, and later governmental agencies. Under Islam, the availability of paper was linked to increased literacy and growth of libraries. In early modern Europe, before the widespread use of wood in the papermaking process, libraries and archives were part of an "economy of paper" with paper at times being in short supply. In the modern era, the world of papermaking did not intersect much with the world of the library, which made progress with the problem of brittle books, one of its greatest challenges, slow, though recent efforts of government, industry, scientists, and representatives of the library have produced positive results. The damage caused by wood-based paper in libraries was mirrored by the environmental damage caused by wood-based papermaking in communities. The history of papermaking and libraries demonstrates the importance of understanding the technologies which support the library, while also advocating effectively to the representatives of all its sources of support in ways which promote the values of the library and its associated community. [ABSTRACT FROM AUTHOR]

Copyright of Restaurator is the property of De Gruyter and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: The advent of Personalized Medicine (PM) holds significant promise in revolutionizing healthcare by tailoring treatments to individual patients based on their data. However, its successful implementation requires the seamless integration of innovative technologies and presents formidable challenges in terms of sustainability. To tackle these challenges head-on, the International Consortium for Personalized Medicine (ICPerMed) was established, and the IC2PerMed project, as part of this consortium, seeks to foster collaboration between the European Union (EU) and China in the field of Personalized Medicine. Based on the results collected by the project, the objective of this study is to discern the key priorities for the implementation of Personalised Medicine concerning Information and Communication Technologies (ICT) and Big Data and digital solutions, with a particular emphasis on data management and protection., Methods: A Delphi survey was conducted to gather expert's consensus on the main priorities for actions on Information and Communication Technologies (ICT) and Big Data and digital solutions in the field of Personalized Medicine., Results: The survey identified seven priorities in the area of Big Data and digital solutions, including data interoperability, standards, security measures, and international partnerships. Additionally, twelve priorities were identified for the innovation-to-market process, emphasizing cost-effectiveness, need assessment, and value definition in resource allocation., Conclusions: The effective implementation of new technologies in Personalized Medicine research and practice is essential for the advancement of healthcare systems in both the European and Chinese contexts. The identified priorities play a pivotal role in promoting the sustainability of health systems and driving innovation in the implementation of Personalized Medicine. Addressing challenges related to data interoperability, standards, security, international collaboration, cost-effectiveness, and value assessment is of utmost importance in order to propel the progress of Personalized Medicine in healthcare systems., (© 2024. The Author(s).)

Introduction: Over the last decade, the emergence and spread of personalized medicine (PM) have defined a substantial revolution in healthcare. In principle, healthcare system sustainability is challenged by the investments required for research and development, as well as the adoption of PM techniques in routine clinical care. The "Integrating China in the International Consortium for Personalized Medicine" (IC2PerMed) EU-funded project aims to integrate China into the "International Consortium for Personalized Medicine" (ICPerMed). IC2PerMed aims to align the EU and China's research agendas in this field to enable a swift development of approaches in the EU and China with strong leverage upon EU-Chinese collaborations., Methods: Within this project, we first mapped relevant policies on PM in both the EU and China, and then we involved European and Chinese experts in PM in workshops and Delphi surveys in order to identify relevant priorities for the implementation of PM in sustainable healthcare., Results: As a result of this process, we identified nine overarching priorities, each addressing specific aspects of the sustainability of healthcare systems and PM implementation, with the main goal of supporting policymakers in integrating PM approaches in the EU and China., Discussion/conclusion: The implementation of PM in health systems is appealing in terms of improved accuracy in diagnostics, treatment, and prevention of disease, as well as reduction of the side effects resulting from inefficient use of drugs. Research, development, and implementation of needed techniques require time and resources that can slow the adoption of PM in healthcare systems. The nine priorities we identified address some of the most critical points, trying to lay the foundations for a comprehensive approach., (© 2023 The Author(s). Published by S. Karger AG, Basel.)

Purpose: There are major gaps in our knowledge of hereditary ocular conditions in the Asia-Pacific population, which comprises approximately 60% of the world's population. Therefore, a concerted regional effort is urgently needed to close this critical knowledge gap and apply precision medicine technology to improve the quality of lives of these patients in the Asia-Pacific region., Design: Multi-national, multi-center collaborative network., Methods: The Research Standing Committee of the Asia-Pacific Academy of Ophthalmology and the Asia-Pacific Society of Eye Genetics fostered this research collaboration, which brings together renowned institutions and experts for inherited eye diseases in the Asia-Pacific region. The immediate priority of the network will be inherited retinal diseases (IRDs), where there is a lack of detailed characterization of these conditions and in the number of established registries., Results: The network comprises 55 members from 35 centers, spanning 12 countries and regions, including Australia, China, India, Indonesia, Japan, South Korea, Malaysia, Nepal, Philippines, Singapore, Taiwan, and Thailand. The steering committee comprises ophthalmologists with experience in consortia for eye diseases in the Asia-Pacific region, leading ophthalmologists and vision scientists in the field of IRDs internationally, and ophthalmic geneticists., Conclusions: The Asia Pacific Inherited Eye Disease (APIED) network aims to (1) improve genotyping capabilities and expertise to increase early and accurate genetic diagnosis of IRDs, (2) harmonise deep phenotyping practices and utilization of ontological terms, and (3) establish high-quality, multi-user, federated disease registries that will facilitate patient care, genetic counseling, and research of IRDs regionally and internationally., Competing Interests: Declaration of Competing Interest The authors have no conflicts of interest to disclose., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

The not-so-bygone worlds of music and colonialism in the twentieth century have yielded a wealth of scholarly 'paper knowledge' in the twenty-first of which to build off new archival-musicological work. This article takes a particular archiving direction by turning to paper itself – and pivots the postcolonial pen around the texts and textures of re-engaging colonial history in postcolonial music scholarship. I explore these writing stakes through my adopted narrative of 'the post/colonial music archive', as shaped by paper and paper's sounding elements of tone and voice. Crisscrossing between the colonial moment and the postcolonial pen, I straddle this developing narrative of the archive, and the registers and inflections of extant source narration for what they can jointly vocalize about the music making of the Municipal Brass Band in 1930s treaty port Shanghai, and the Sino-British Club in postwar colonial Hong Kong – two ostensible musical worlds of 'Britain in China' in the twentieth century, here thrown into disarray by the post/colonial archive's own inchoate, counter-tales. Ultimately, in this process, postcolonial music scholarship gains further traction and meaning as a multi-articulating inquiry – and a turn of mind that does not let colonial history and its persistent challenges for writing go askew. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

• A closed-loop material flow analysis model is established for China's pulp and paper industry (CPPI), followed by a comprehensive quantitative analysis from both retrospective and prospective perspectives. • By implementing sound plans and stricter regulations and standards, China has improved recycling and material use efficiency, reduced the organic material with wastewater, and shifted towards recovered paper as a raw material over non-wood fiber. • Lowering the waste paper recycling rate to increase carbon storage is not suitable for China, due to the limited virgin fiber and growing demand. • The growing paper demand requires efforts from both ends of virgin fiber supply and waste paper management towards the sustainable development of CPPI. As the largest global producer and consumer of pulp and paper, China faces significant sustainability challenges in fiber supply and waste paper management. A comprehensive material flow analysis of China's pulp and paper industry (CPPI) is needed to understand the interaction between raw material supply and waste paper management. Here, we construct a closed-loop material flow analysis model for CPPI, examine the evolution patterns of material metabolism from 1990 to 2019, and explore the demand for paper production, waste paper recycling, and virgin fiber supply in 2030 and 2050 under multiple scenarios considering critical factors. Results show that the industry has undergone rapid expansion, increased material use efficiency, and a shift towards recycled pulp from 1990 to 2019. China's paper demand will grow to 186 Mt in the next 30 years, resulting in a significant increase in both demand for fibers (173 Mt) and the generation of waste paper (138 Mt). To ensure a sustainable fiber supply for CPPI, domestic waste paper recycling needs to be prioritized. However, attention should also be paid to the availability of virgin pulp supply and proper disposal of organic solid waste. Proper management of these factors is crucial for achieving a circular economy in the industry and reducing its environmental impact. The findings highlight the importance of addressing both raw material supply and waste paper management for CPPI's sustainable development. [Display omitted] [ABSTRACT FROM AUTHOR]

The purpose of this paper is to retrieve and study the highly cited papers as well as the correlation between the citation frequency and the download frequency of the 20 traditional Chinese medicine journals in China, in order to provide the guidance for improving the influence and academic quality of these journals. Bibliometric analyses were conducted on 1103 papers of 20 traditional Chinese medicine journals from 2011 to 2020 by retrieving for the China Academic Journal Network Publishing Database (CAJD) in China National Knowledge Infrastructure (CNKI). SPSS 17.0 software was used to analyze the correlation between the citation frequency and the download frequency via conducting regression fitting and establishing the mathematical models. The results showed that the total citations of the 1103 papers were 93051 times and the average citations were 84.36 times per paper. The total downloads of the 1103 papers were 2058442 times, and the average downloads were 1866.22 times per paper. China Journal of Chinese Materia Medica ranked first according to the number of papers, total citations and total downloads. The citations of Journal of Chinese Medicinal Materials ranked first based on the number of citations per paper. One of Li's paper had been cited the most (983 times). There were 629 (57.03%) papers whose first author was from universities. The scopes of the first authors were distributed in 29 regions and 2 special administrative regions (Macao, Hong Kong) in China. The authors from Beijing published 283 (25.66%) papers, ranking number one. The number of papers supported by funds was 882 (79.96%). The research results of correlation showed that the citation frequency and the download frequency of the highly cited papers had a highly positive correlation from both journal and paper level for whether the sample data of journals was normally distributed or nonnormally distributed. The correlation coefficients of the 20 journals at journal level and that at paper level were 0.9765 and 0.6677, respectively. The correlation was better at journal level than that at paper level, while the optimal regression fitting was all cubic polynomial. Among the 1103 papers, there were 684 (62.01%) research papers and 419 (37.99%) review papers. The main citation period of the top 15 papers was from the 2nd year to the 6th year after publication, accounting for 78.39%. Papers on clinical therapeutics research, papers on the pharmacological effects and its mechanism of traditional Chinese medicine, and papers on traditional Chinese medicine and natural medicine were the main source of the highly cited papers of the traditional Chinese medicine journals. Editors of the journals should focus on the above-mentioned research areas to select manuscripts for exploiting the excellent sources extensively, while paying attention to review papers, focusing on national major or key projects, paying attention to network spreading, stabilizing authors with quality services, in order to improve the influence and the academic quality of journals. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Medical postgraduates are the new force of scientific research groups in China. However, the limitation of their English language ability restricts their publication of high-level Science Citation Index (SCI) papers to a large extent. Measures to improve students' SCI language ability from macro, intermediate and micro aspects were discussed through flipped classroom teaching mode, such as students' reading papers before class, students' practicing paper writing after class, and teacher's making comments in class. The feedback from the questionnaire showed that 96.65% of the students were satisfied with the teaching mode and 93.57% of them had improved their confidence in SCI writing. For the problems mentioned in the feedback, it was suggested that colleges and universities should formulate policies to encourage teachers to engage in medical English teaching, meanwhile teachers should constantly improve their professional quality, so as to help students improve their SCI language ability rapidly. [ABSTRACT FROM AUTHOR]

China is the largest importer of waste paper in the world and is highly dependent on the international market. Thus, the relationship between Chinese and international waste paper markets affects the supply of fiber materials in China's paper industry. This study examined the dynamic relationship between the two markets and the impact of newly implemented policies on both markets. We used unit root tests, cointegration test, vector error correction model (VECM) and frequency-domain Granger causality test to investigate the integration between Chinese and international waste paper markets and identify which of the two markets is the price leader. The results revealed that the two markets were integrated after controlling for structural breaks, and the Chinese market acted as the price leader. Since the supply of waste paper and wood pulp is insufficient in China to meet the fiber demand of the paper industry, waste paper import restrictions have significantly affected the supply of fiber materials in China's paper industry. Therefore, the Chinese government should fully consider the benefit of market integration and make full use of international waste paper resources to satisfy the large domestic demand for paper products. [ABSTRACT FROM AUTHOR]

Paper-cutting is one of the valuable intangible cultural heritages of China, with distinctive features such as "round as the autumn moon, sharp as the wheat mane, square as the green brick, missing as the serrated teeth, and thread as the beard," and is a widely spread folk art. The art of paper-cutting brings new inspiration to the design of structures, and by changing the topology of the raw material, the material/structure can undergo significant changes in physical properties, such as optical, thermal, acoustic, and mechanical aspects. The protection of intangible cultural heritage is a process of cultural self-awareness and a kind of cultural reflection and enlightenment. In the history of promoting socialist cultural development, the protection of "intangible heritage" paper-cutting is undoubtedly of great significance. The purpose of digital image repair is to restore the integrity of the broken image, and the process is to fill in the specified area of the digital image with information, requiring a natural transition between the filled area and the original area of the image and minimizing artificial traces, so that the image looks as if it has never been broken. In this paper, the paper-cutting pattern design method based on image restoration technology is investigated, starting from the preprocessing of paper-cutting images by acquiring the edges of the images and using the Criminisi image restoration algorithm with image broken edge reconstruction to realize the image broken edge reconstruction design of paper-cutting graphics. Therefore, the paper-cut graphics generated by the method in this paper are concise and coherent as a whole, which reduces the difficulty of paper-cut design while satisfying individual design requirements. [ABSTRACT FROM AUTHOR]