Search

Researchers have extensively investigated the back-barrier islands morphodynamics using numerical methods. However, the influence of rocky mouth islands, which may be submerged by sea-level rise, has been rarely explored. Using the Dongshan Bay in southern China as a reference, this study numerically explores the long-term morphodynamic effect of geological constraints (e.g. rocky islands) for back-barrier basins. Model results indicate that the spatial configuration of mouth islands can considerably affect the morphological development of tidal basins. The presence of mouth islands narrows the inlet cross-sectional area, increasing flow velocity and residual current, resulting in more sediment suspension and transport. Meanwhile, mouth islands tend to increase erosion in the tidal basin and sedimentation in the ebb-delta area. Furthermore, the spatial distribution of mouth islands can also affect tidal basin evolution: the basin-side mouth islands tend to cause more basin erosion with higher tidal currents and more sediment transport. In contrast, the delta-side ones may increase relative sediment deposition in the basin. Finally, larger tidal prisms are observed with more mouth islands and with basin-side mouth islands, suggesting that the number and location of islands can affect the relationship between the tidal prism and inlet cross-sectional area. This modelling study furthers the understanding of barrier basin morphodynamics affected by rocky mouth islands and informs management strategies under a changing environment. [ABSTRACT FROM AUTHOR]

Understanding sediment sorting and bedding dynamics has high value to unravelling the mechanisms underlying geomorphological, geological, ecological and environmental imprints of tidal wetlands and hence to predicting their future changes. Using the Nanhui tidal flat on the Changjiang (Yangtze) Delta, China, as a reference site, this study establishes a schematized morphodynamic model coupling flow, sediment dynamics and bed level change to explore the processes that govern sediment sorting and bedding phenomena. Model results indicate an overall agreement with field data in terms of tidal current velocities, suspended sediment concentrations (SSCs), deposition thicknesses and sedimentary structures. Depending on the variation of tidal current strength, sand‐dominated layers (SDLs) and mud‐dominated layers (MDLs) tend to form during spring and neap tides, respectively. Thinner tidal couplets are developed during daily scale flood–ebb variations. A larger tidal level variation during a spring–neap tidal cycle, associated with a stronger tidal current variation, favours the formation of SDLs and tidal couplets. A larger boundary sediment supply generally promotes the formation of tidal bedding, though the bedding detail is partially dependent on the SSC composition of different sediment types. Sediment properties, including for example grain size and settling velocity, are also found to influence sediment sorting and bedding characteristics. In particular, finer and coarser sediment respond differently to spring and neap tides. During neap tides, relatively small flow velocities favour the deposition of finer sediment, with limited coarser sediment being transported to the upper tidal flat because of the larger settling velocity. During spring tides, larger flow velocities transport more coarser sediment to the upper tidal flat, accounting for distinct lamination formation. Model results are qualitatively consistent with field observations, but the role of waves, biological processes and alongshore currents needs to be included in further studies to establish a more complete understanding. [ABSTRACT FROM AUTHOR]

ABSTRACT Jin, C.; Gong, Z.; Geng, L.; Zhao, K.; Xu, B.B., and Coco. G., 2018. Subsurface processes in salt marsh of central Jiangsu coast(China). In: Shim, J.-S.; Chun, I., and Lim, H.S. (eds.), Proceedings from the International Coastal Symposium (ICS) 2018 (Busan, Republic of Korea). Journal of Coastal Research, Special Issue No. 85, pp. 296–300. Coconut Creek (Florida), ISSN 0749-0208. Studies of tidal flats morphodynamics tend to ignore subsurface processes like bioturbation or underground water dynamics so that changes in the surface elevation are always considered to be the result of sedimentation/erosion on the soil surface. However, at times, subsurface variations can be as large as elevation changes driven by sedimentation and so control the evolution trend of surface elevation. In this study, four observation sites were set up on the salt marsh in the central Jiangsu coast (China). A three-year field observation campaign has been carried out studying seabed elevation changes. The Surface Elevation Table-Marker Horizon (SET-MH) technique was applied to measure surface elevation and net sedimentation. The subsurface variation was derived from the difference between the surface elevation and the sedimentation. Results show that the changes in surface elevation are not equal to the sedimentation and that subsurface process, responsible for such deviation, are strongly affected by storm surge. Storm surges increase the underground water content leading to the observed expansion of the subsurface soil. The expansion results in the rapid increase of surface elevation and it takes almost one year to recover to the surface elevation before the storm season. [ABSTRACT FROM AUTHOR]

ABSTRACT Zhou, Z.; Chen, L.Y.; Townend, I.; Coco, G.; Friedrichs, C., and Zhang C.K., 2018. Revisiting the relationship between tidal asymmetry and basin morphology: A comparison between 1D and 2D models. In: Shim, J.-S.; Chun, I., and Lim, H.S. (eds.), Proceedings from the International Coastal Symposium (ICS) 2018 (Busan, Republic of Korea). Journal of Coastal Research, Special Issue No. 85, pp. 151–155. Coconut Creek (Florida), ISSN 0749-0208. Tidal basin morphology is strongly dependent on the condition of tidal asymmetry which may result in either net import (flood-dominance) or export (ebb-dominance) of sediment. Based on the one-dimensional (1D) shallow water equations, various stability relationships have been developed linking tidal parameters with basin geometry. This study revisits the widely used numerical stability relationship developed by Friedrichs and Aubrey (1988), using a 2D depth-averaged model which is able to describe a more extensive flow field and more realistic bathymetries. Model comparison between 1D and 2D models indicates that excluding or including intertidal areas as a momentum-conveying component can highly affect the tidal velocity distribution and magnitude, particularly when the relative water depth is large (i.e., the ratio between tidal amplitude and mean water depth is small). Meanwhile, the tidal distortion parameters (relative tidal phase 2M2-M4 and tidal amplitude ratio M4/M2) derived from the 2D model appear to be more strongly controlled by the relative water depth (a/h) than that in the 1D model. Further research can be devoted to developing more generic stability relationships which can be applied in a more quantitative manner. [ABSTRACT FROM AUTHOR]

• Model captures main mechanisms underlying sediment sorting and bedding dynamics. • Storms bring coarser sediment to upper flats, forming sand-dominated layers (SDLs). • Stronger and longer storms cause thicker SDLs with more sand fraction. • Storms occurring during spring tide generate thicker SDLs than that during neap. • Impact of clustered storms is more significant than the sum of individual storms. Field studies suggest that storms can considerably affect the morphology, sedimentology and bedding structure of tidal flat wetlands because of their high-energy, while numerical modeling studies unravelling the underlying mechanisms remain rare. With a tidal flat of the Changjiang Delta, China as a reference site, this study explores the role of storms on sediment sorting and bedding behaviors using a biomorphodynamic model that couples hydrodynamics, sediment transport, marsh dynamics and morphological change. Model results indicate that storms can leave clear signatures on tidal flats in both horizontal and vertical sedimentary features, in agreement with field observations. The high bed shear stress induced by storms can initiate the motion of relatively coarse sediment which can be brought shoreward during the flood and settle on the upper tidal flats (or saltmarshes), altering the typically observed cross-shore "landward fining" phenomenon. The storm-entrained coarse sediment on the higher flat is usually hard to be brought offshore during calm weather, and hence leaving an evident sand-dominated layer (SDL) within neighboring mud-dominated layers (MDL). Storms can also destroy tidal rhythmites formed under calm weather. With the increase in storm intensity and duration, the thickness and the sand fraction of the SDL increase accordingly. The SDL thickness generated by a weaker storm during the spring tide is larger than that of a stronger storm during the neap tide. Storm chronology also plays an important role. In particular, the impact of two overlapping or temporally close storms is larger than the sum of the two individual storms. Overall, this study results in a more in-depth mechanistic understanding of storm impacts on tidal flat biomorphodynamics, providing a scientific facet to make sustainable management strategies for coastal wetlands. [ABSTRACT FROM AUTHOR]