Search

Volatile chemical products (VCPs) have become an important source of reactive organic gases (ROGs) in urban areas worldwide. Industrial activities can also utilize a large number of VCPs and emit many organic gases into the atmosphere. Due to multiple sampling and measurement challenges, only a subset of ROG species is usually measured for many industrial VCP sources. This study aims to investigate the emissions of ROGs from five industrial VCP sources in the Pearl River Delta (PRD) region of China, including the shoemaking, plastic surface coating, furniture coating, printing, and ship coating industries. A more comprehensive speciation of ROG emissions from these industrial VCP sources was developed by the combination of proton-transfer-reaction time-of-flight mass spectrometer (PTR-ToF-MS) and the gas chromatography–mass spectrometer/flame ionization detector (GC–MS/FID). Our study identified oxygenated ROG species (OVOCs) as representative ROGs emitted from these sources, which are highly related to specific chemicals used during industrial activities. Moreover, mass spectra similarity analysis revealed significant dissimilarities among the ROG emissions from industrial activities, indicating substantial variations between different industrial VCP sources. Except for the ship coating industry utilizing solvent-borne coatings, the proportions of OVOCs range from 67 % to 96 % in total ROG emissions and 72 % to 97 % in total OH reactivity (OHR) for different industrial sources, while the corresponding contributions of OVOCs in the ship coating industry are only 16 ± 3.5 % and 15 ± 3.6 %. The industrial VCP sources associated with solvent-borne coatings exhibited a higher ozone formation potential (OFP), reaching as high as 5.5 and 2.7 g O 3 g -1 ROGs for the ship coating and furniture coating industries, primarily due to contributions from aromatics. We find that a few species can contribute the majority of the ROG emissions and also their OHR and OFP from various industrial VCP sources. Our results suggest that ROG treatment devices may have limited effectiveness for all ROGs, with treatment efficiencies ranging from - 12 % to 68 %. Furthermore, we found that ambient measurements in industrial areas have been significantly impacted by industrial VCP sources, and ROG pairs (e.g., methyl ethyl ketone (MEK) / C 8 aromatics ratio) can be utilized as reliable evidence by using high-time-resolution ROG measurements from PTR-ToF-MS. Our study demonstrated the importance of measuring a large number of ROGs using PTR-ToF-MS for characterizing ROG emissions from industrial VCP sources. [ABSTRACT FROM AUTHOR]

Volatile chemical products (VCPs) have become an important source of reactive organic gases (ROGs) in urban areas worldwide. Industrial activities can also utilize a large amount of VCPs and emit many organic gases into the atmosphere. Due to multiple sampling and measurement challenges, only a subset of ROG species is usually measured for many industrial VCP sources. This study aimed to investigate the emissions of ROGs from five industrial VCP sources in China, including shoemaking, plastic surface coating, furniture coating, printing, and ship coating industries. More comprehensive speciation of ROG emissions from these industrial VCP sources was developed by the combination of the proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS) along with gas chromatography-mass spectrometer/flame ionization detector (GC-MS/FID). Our study identified oxygenated ROG species (OVOCs) as representative ROGs emitted from these sources, which are highly related to specific chemicals used during the industrial activities. Moreover, mass spectra similarity analysis revealed significant dissimilarities among the ROG emission sources, indicating substantial variations between different industrial VCP sources. Except for the ship coating industry utilizing solvent-borne coatings, the proportions of OVOCs range from 67 % to 96 % in total ROG emissions and 72 % to 97 % in total OH reactivity (OHR) for different industrial sources. The industrial VCP sources associated with solvent-borne coatings exhibited a higher ozone formation potential (OFP), reaching as high as 5.5 and 2.7 g O3·g-1 ROGs for ship coating and furniture coating industries, primarily due to contributions from aromatics. The fractions of the ten most abundant species in total ROG emissions, OHR, and OFP indicated a highly centralized of ROG emissions from various industrial VCP sources. Our results suggest that ROG treatment devices may have limited effectiveness for all ROGs, with treatment efficiencies ranging from -12 % to 68 %. Furthermore, we found that ROG pairs (e.g., methyl ethyl ketone (MEK) /C8 aromatics ratio) could serve as effective indicators for distinguishing industrial VCP sources, particularly for measurements in industrial areas. Our study demonstrated the importance of measuring a large number of ROGs using PTR-ToF-MS for characterizing ROG emissions from industrial VCP sources. [ABSTRACT FROM AUTHOR]

Understanding the near-ground vertical and temporal photochemical O3 formation mechanism is important to mitigate the O3 pollution. Here, we measured the vertical profiles of O3 and its precursors at six different heights from 5-335 m using a newly built vertical observation system in Pearl River Delta (PRD) region, China. The net photochemical ozone production rate (P (O3)net) and O3 formation sensitivities at various heights were diagnosed using an observation-based model coupled with the Master Chemical Mechanism (MCM v3.3.1). Moreover, for the assessment of model performance and the causative factors behind O3 pollution episodes, the net photochemical ozone production rate (P (O3)net) was measured at 5 m ground level utilizing a custom-built detection system. In total three O3 pollution episodes and two non-episodes were captured. The identified O3 pollution episodes were found to be jointly influenced by both photochemical production and physical transport, with local photochemical reactions play a dominate role. The high index of agreement (IOA) calculated from comparing the modelled and measured P (O3)net values indicated the rationality to investigate the vertical and temporal variability of O3 formation mechanism using modelling results. However, the measured P (O3)net values were generally higher than the modelled P (O3)net values, particularly under high NOx conditions, which may indicate a potential underestimation of total RO2 by the model. Throughout the measurement period, the contribution of different reaction pathways to O3 production remained consistent across various heights, with HO2+NO as the major O3 production pathway, followed by RO2+NO. We saw P (O3)net decreased with the increase of the measurement height, primarily attributed to the decreased O3 precursors anthropogenic organic compounds (AVOC) and oxygenated volatile organic compounds (OVOC). O3 formation regimes were similar at different heights during both episodes and non-episodes, which was located either in volatile organic compounds (VOCs) sensitive regime or in transition regime and more sensitive to VOCs. Diurnally, photochemical O3 formation typically remained in the VOCs sensitive regime during the morning and noon time, but in the transitional regime and more sensitive to VOCs in the afternoon at around 16:00 LT. The vertical and temporal O3 formation are most sensitive to AVOC and OVOC, which suggests that targeting VOCs, especially AVOC and OVOC, for control measures is more practical and feasible at the observation site. The vertical temporal analysis of O3 formation mechanisms near the ground surface in this study provides critical foundational knowledge for formulating effective short-term emergency and long-term strategies to combat O3 pollution in the PRD region of China. [ABSTRACT FROM AUTHOR]

Current process-based research mainly uses box models to evaluate photochemical ozone production and destruction rates, and it is unclear to what extent the photochemical reaction mechanisms are elucidated. Here, we modified and improved a net photochemical ozone production rate (NPOPR, P (O 3) net) detection system based on the current dual-channel reaction chamber technique, which makes the instrument applicable to different ambient environments, and its various operating indicators were characterized, i.e., "airtightness", light transmittance, wall losses of the reaction and reference chambers, conversion rate of O 3 to NO 2 , air residence time, and performance of the reaction and reference chambers. The limits of detection of the NPOPR detection system were determined to be 0.07, 1.4, and 2.3 ppbv h -1 at sampling flow rates of 1.3, 3, and 5 L min -1 , respectively. We further applied the NPOPR detection system to field observations at an urban site in the Pearl River Delta (China). During the observation period, the maximum value of P (O 3) net was 34.1 ppbv h -1 , which was ∼ 0 ppbv h -1 at night within the system detection error and peaked at approximately noon local time. The daytime (from 06:00–18:00 LT) average value of P (O 3) net was 12.8 (± 5.5) ppbv h -1. We investigated the detailed photochemical O 3 formation mechanism in the reaction and reference chambers of the NPOPR detection system using a zero-dimensional box model. We found that the photochemical reactions in the reaction chamber were very close to those in ambient air, but there was not zero chemistry in the reference chamber because the reaction related to the production and destruction of RO 2 (= HO 2 + RO 2) continued in the reference chamber, which led to a small amount of P (O 3) net. Therefore, the P (O 3) net measured here can be regarded as the lower limit of the real P (O 3) net in the atmosphere; however, the measured P (O 3) net was still ∼ 7.5 to 9.3 ppbv h -1 higher than the modeled P (O 3) net value depending on different modeling methods, which may be due to the inaccurate estimation of HO 2 / RO 2 radicals in the modeling study. Short-lived intermediate measurements coupled with direct P (O 3) net measurements are needed in the future to better understand O 3 photochemistry. Our results show that the NPOPR detection system can achieve high temporal resolution and continuous field observations, which helps us to better understand photochemical O 3 formation and provides a key scientific basis for continuous improvement of air quality in China. [ABSTRACT FROM AUTHOR]

Cycloalkanes are important trace hydrocarbons existing in the atmosphere, and they are considered a major class of intermediate volatile organic compounds (IVOCs). Laboratory experiments showed that the yields of secondary organic aerosols (SOAs) from oxidation of cycloalkanes are higher than acyclic alkanes with the same carbon number. However, measurements of cycloalkanes in the atmosphere are still challenging at present. In this study, we show that online measurements of cycloalkanes can be achieved using proton transfer reaction time-of-flight mass spectrometry with NO + chemical ionization (NO + PTR-ToF-MS). Cyclic and bicyclic alkanes are ionized with NO + via hydride ion transfer, leading to major product ions of C n H 2n-1+ and C n H 2n-3+ , respectively. As isomers of cycloalkanes, alkenes undergo association reactions with major product ions of C n H 2n ⚫ (NO) + , and concentrations of 1-alkenes and trans-2-alkenes in the atmosphere are usually significantly lower than cycloalkanes (about 25 % and <5 %, respectively), as a result inducing little interference with cycloalkane detection in the atmosphere. Calibrations of various cycloalkanes show similar sensitivities associated with small humidity dependence. Applying this method, cycloalkanes were successfully measured at an urban site in southern China and during a chassis dynamometer study of vehicular emissions. Concentrations of both cyclic and bicyclic alkanes are significant in urban air and vehicular emissions, with comparable cyclic alkanes / acyclic alkanes ratios between urban air and gasoline vehicles. These results demonstrate that NO + PTR-ToF-MS provides a new complementary approach for the fast characterization of cycloalkanes in both ambient air and emission sources, which can be helpful to fill the gap in understanding the importance of cycloalkanes in the atmosphere. [ABSTRACT FROM AUTHOR]

The characteristics of wintertime volatile organic compounds (VOCs) in the North China Plain (NCP) region are complicated and remain obscure. VOC measurements were conducted by a proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS) at a rural site in the NCP from November to December 2018. Uncalibrated ions measured by PTR-ToF-MS were quantified and the overall VOC compositions were investigated by combining the measurements of PTR-ToF-MS and gas chromatography-mass spectrometer/flame ionization detector (GC-MS/FID). The measurement showed that although atmospheric VOCs concentrations are often dominated by primary emissions, the secondary formation of oxygenated VOCs (OVOCs) is non-negligible in the wintertime, i.e., OVOCs accounts for 42% ± 7% in the total VOCs (151.3 ± 75.6 ppbV). We demonstrated that PTR-MS measurements for isoprene are substantially overestimated due to the interferences of cycloalkanes. The chemical changes of organic carbon in a pollution accumulation period were investigated, which suggests an essential role of fragmentation reactions for large, chemically reduced compounds during the heavy-polluted stage in wintertime pollution. The changes of emission ratios of VOCs between winter 2011 and winter 2018 in the NCP support the positive effect of "coal to gas" strategies in curbing air pollutants. The high abundances of some key species (e.g. oxygenated aromatics) indicate the strong emissions of coal combustion in wintertime of NCP. The ratio of naphthalene to C8 aromatics was proposed as a potential indicator of the influence of coal combustion on VOCs. [Display omitted] [ABSTRACT FROM AUTHOR]

Purpose: Dual antiplatelet therapy (DAT) with clopidogrel and aspirin is not suitable for clopidogrel resistance (CR) patients with aspirin intolerance. To investigate the prevalence of CR in patients with aspirin intolerance after ischemic stroke (IS) and to assess the relationship between CR and CYP2C19, P2Y12 receptor genotypes in patients with aspirin intolerance after IS. Methods: We enrolled 126 IS patients with aspirin intolerance from Han Chinese in Shangqiu from January 2016 to November 2018. All IS patients with aspirin intolerance were treated with clopidogrel for 7 days. Adenosine diphosphate-induced platelet inhibition rate was measured by thrombelastography (TEG) mapping assay. The SNPs CYP2C19*2, CYP2C19*3, and P2Y12 receptor (52 G >T) were genotyped by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) technique. Binary logistic regression analyses were performed using SPSS version 20.0. Results: The prevalence of CR in patients with aspirin intolerance after IS was approximately 31.0%. Multivariate regression analysis showed that body weight (OR 1.091 (95% CI 1.031–1.155), p = 0.003), CYP2C19 phenotype intermediate metabolizer (IM) (OR 3.820 (95% CI 1.021–14.288), p = 0.046), and CYP2C19 phenotype poor metabolizer (PM) (OR 14.481 (95% CI 2.791–75.129), p = 0.001) significantly increased the risk of CR and P2Y12 receptors (52 G >T) (OR 3.498 [95% CI 1.251–9.784], p = 0.017) increased the risk of CR. Conclusions: The patients with high body weight, the CYP2C19 phenotypes, and P2Y12 receptor (52 G >T) variant alleles are at risk of CR during clopidogrel treatment in Chinese IS patients with aspirin intolerance. The higher body weight and relevant polymorphisms may help to predict CR in Chinese IS patients with aspirin intolerance. [ABSTRACT FROM AUTHOR]